Crestron 1 Beyond AutoTracker 3 Series Bedienungsanleitung
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-
SLVR-1B, IV-CAMA3-20-W-1B, and IV-
CAMA3-20-SLVR-1B
1 Beyond AutoTracker™ 3 Series
Product Manual
Crestron Electronics, Inc.
The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Blackmagic is either a trademark or a registered trademark of Blackmagic Design Pty. Ltd
in the United States and/or other countries. Webex is either a trademark or a registered trademark of Cisco Systems,
Inc. in the United States and/or other countries. Huawei is either a trademark or a registered trademark of Huawei
Technologies Co., Ltd in the United States and/or other countries. Inogeni is either a trademark of a registered
trademark of INOGENI Inc. in the United States and/or other countries. Microsoft Teams is either a trademark or a
registered trademark of Microsoft Corporation in the United States and/or other countries. NDI is either a trademark or
a registered trademark of NewTek, Inc. in the United States and/or other countries. Panopto is either a trademark or a
registered trademark of Panopto, Inc. in the United States and/or other countries. Mediasite is either a trademark or a
registered trademark of Sonic Foundry, Inc. in the United States and/or other countries. VLC and VLC Media Player are
trademarks or registered trademarks of VideoLAN Association in the United States and/or other countries. Sony Exmor
is either a trademark or a registered trademark of Sony Corporation in the United States and/or other countries. Zoom
Rooms is either a trademark or registered trademark of Zoom Video Communications, Inc. in the United States and/or
other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the
marks and names of others. Crestron is not responsible for errors in typography or photography.
©2023 Crestron Electronics, Inc.
Contents
Overview 6
AutoTracker Features 7
Intelligent Tracking Technology 7
Conferencing Compatibility 7
High Quality Video 8
Manual Control Options 8
Networked Power, Stream, and Control 8
Quiet, Fast Switching Between Presets 8
Multicamera Capability with Automate Systems 8
Mounting Options 8
NDI|HX for High Quality Network Video 8
Physical Description 9
1 Beyond Camera Manager Software 9
Specifications 11
Dimension Drawings 13
Installation 14
In the Box 14
Mounting Requirements 15
Mounting Options 15
Wall Mount 16
J Ceiling Mount 17
Wiring 18
Network Connection 18
PoE+ Power 19
DC Power 19
Video Output 19
Serial Control 19
Zoom Rooms Installation 21
1 Beyond Camera Manager System Requirements 23
1 Beyond Camera Manager Initial Setup 23
Install the Software 23
Configuration 24
Configuration via the 1 Beyond Camera Manager 25
Add to Camera List 25
View the Connection Status 28
Configure Camera Settings 28
Access Video Feeds 36
Tracking Settings 37
Monitor RTSP Streams 50
Product Manual — Doc. 9323C Contents • iii
Serial Wiring 55
Reserved Presets 56
Store and Recall Tracking Settings 57
Heartbeat Tracking Status 57
VISCA Commands 59
Start/Stop Tracking 59
ACK / Completion Messages 59
Error Messages 59
Commands 60
Inquiry Commands 63
Troubleshooting 68
Resources 70
Crestron Support and Training 70
Product Certificates 70
iv • Contents Product Manual — Doc. 9323C
v • Contents Product Manual — Doc. 9323C
Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 6
Overview
The IV-CAMA3-20-N-W-1B,IV-CAMA3-20-N-SLVR-1B,IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-1B
AutoTracker™ 3 series cameras are high-quality PTZ cameras that automatically track and frame a
presenter based on facial and motion detection. Ideal for lecture capture or conferences, the
IV-CAMA3-20-N-W-1B camera can automate camera operations with no personnel present and still
have the viewing experience of a manned camera. All the tracking intelligence is built into the camera –
no external system is needed. In addition, the IV-CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B
NDI®|HXenabled cameras allow for monitoring, control, power, and video output on a single Ethernet
connection.
NOTE:The IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-
20-SLVR-1B are functionally similar. For simplicity within this manual, the term "AutoTracker" is
used except where otherwise noted.
7 • IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-
SLVR-1B
Product Manual — Doc.
9323C
AutoTracker Features
Key features for the AutoTracker series cameras include:
lAutomatically pans, tilts, and zooms to smoothly follow and frame the presenter
lAI-enabled tracking with dual camera technology
lSmooth tracking and quiet operation
lCompatible with popular conferencing platforms such as Microsoft Teams® and Zoom Rooms™
software
lConnects directly to a codec or recording/streaming device with no external computer required
lHigh quality video supporting resolutions up to 1080p60
lSingle Ethernet connection provides power (PoE+), monitoring, control, and NDI®|HX compatible
video2(only supported on the IV-CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B)
lCompatible with Automate™ multicamera systems
lSupports 20x optical zoom for tracking distances up to 50ft from the participants
NOTE:The IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-
20-SLVR-1B AutoTracker cameras include integrated circuits produced by HiSilicon (part numbers
HI3516ARBCV100 and HI3516ARFCV200), a subsidiary of Huawei® Technologies Company.
Intelligent Tracking Technology
Intelligent tracking1automatically detects the presenter and keeps them in the optimal part of the
frame. It is easily set up to prevent tracking other subjects or displays. The AutoTracker is two cameras
in one: a wide-angle camera that continually monitors the room for motion and a PTZ camera that
follows the presenter. This dual camera approach allows the camera to adjust more quickly and never
lose the presenter.
Conferencing Compatibility
Optimize video conferencing, recording, or streaming by using the AutoTracker 3 series cameras with
Microsoft Teams®, Zoom Rooms™, Cisco WebEx®, MediaSite®, or Panopto® software. The AutoTracker
camera includes 3G-SDI video output for use with popular video conferencing codecs and capture
appliances. The IV-CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B also support NDI|HX video
output.
Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 8
High Quality Video
A high quality Sony Exmor® CMOS sensor enables the camera to output up to 1080p60 resolution video
via the 3G-SDI port. The AutoTracker works well in low light and in front of bright screens.
Manual Control Options
Use VISCA over IP to control the camera with a Crestron® control system. 1B Cam Manager Software is
included for easy configuration from a computer on the network.
Networked Power, Stream, and Control
Connect a single Ethernet cable to power (PoE+), monitor, set up, and control the AutoTracker camera.
Quiet, Fast Switching Between Presets
Up to 256 pan, tilt, and zoom combination presets can be configured. The camera will move to the
selected preset point. A quiet, fast motor (120°/s pan speed) sets camera angles quickly.
Multicamera Capability with Automate Systems
Add the AutoTracker camera to an Automate multicamera system. Automate can be set to autoswitch
between multiple 1 Beyond cameras to focus on the active speaking participant. Incorporate popular
microphones and DSPs to switch between the presenter and audience.
Mounting Options
Standard mounting holes make it easy to mount the camera to a wall mount (included) or a J-Mount
ceiling bracket (sold separately).
NDI|HX for High Quality Network Video
NDI|HX supports efficient and flexible IP configuration with other networked NDI-enabled devices.
NDI|HX allows for easy installation and scalability with a single network pull (only supported on the IV-
CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B).
NOTE:NDI|HX is only supported on the IV-CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B
AutoTracker cameras.
9 • IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-
SLVR-1B
Product Manual — Doc.
9323C
Physical Description
Front
Rear
Bottom
No. Description
1 PTZ Tracking Camera
2 Wide-Angle Camera
3 Audio Input (Only for IP video stream)
4 Ethernet (Supports PoE+)
5 SDI 2 (PTZ camera video output)
6 SDI 1 (Wide-angle camera video output)
7 EXT Port (RS485 / RS 232 serial control)
8 12V DC Power Input
9 1/4 in. Screw Mounting Hole (standard tripod screw)
10 Locating Hole
1 Beyond Camera Manager Software
The 1 Beyond Camera Manager software is a central hub for configuring, monitoring, and controlling 1
Beyond IP cameras. The software enables 1 Beyond AutoTracker 3 camera configuration and
simultaneous monitoring of up to 4 video streams.
Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 10
The 1 BeyondCamera Manager software provides the following features for the 1 Beyond AutoTracker 3
camera.
lDiscover 1 Beyond cameras on the network
lUpgrade camera firmware
lModify camera network settings
lModify camera RTMP(Real-Time Messaging Protocol)settings
lSet authentication credentials for the camera
lModify general settings, such as the camera name
lSet a secondary connection to the camera from a control device(such as a touch screen)
lView up to 4 camera video streams (close-up or panorama)simultaneously
lUse the PTZLens controls to adjust the camera's pan, tilt, zoom, focus, and iris levels
lCreate, recall, and delete camera presets
lUse the OSD(on-screen display)menu to adjust advanced settings
lStart and stop tracking for the camera
lDefine tracking and blocking zones and adjust tracking parameters for the camera
CAUTION:The 1 Beyond Camera Manager software enables changing of critical camera settings
that impact the camera's functionality and effectiveness. Ensure that all procedures in this
document are followed carefully for optimal camera performance.
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Crestron Sicherheitskamera Handbücher
