Crisp Solutions UCommand 616 Bedienungsanleitung

User’s Manual

For QUICK START see page 2inside...

UCommand-616 Universal Remote Control User’s Manual

PREFACE

About this manual

This manual is designed to make using the UCOMMAND-616 as easy

as possible. The information in this document is furnished for instruc-

tional use only, is subject to change without notice, and should not be

construed as a commitment, representation or warranty regarding the

performance of the product.

Updates and additional information can be found at our website:

www.crispsolutions.com

This document contains proprietary information protected by copyright.

All rights are reserved. No part of this manual may be reproduced by

any mechanical, electronic or other means, in any form, without prior

written permission of Crisp Solutions LLC.

This edition printed September, 2000.

Trademarks

All trademarks and registered trademarks are the property of their re-

spective owners.

Radio Frequency Interference

This device complies with Part 15 of the FCC Rules. Operation is sub-

ject to the following two conditions: This device may not cause harmful

interference. This device must accept any Interference received, in-

cluding interference that may cause undesired operation.

UCommand-616 Universal Remote Control User’s Manual

ii PREFACE

Contact

Technical support for Crisp Solutions products is available via e-mail

and on the Web.

E-mail: [email protected]

Web: www.crispsolutions.com

Crisp Solutions LLC

2530 Berryessa Rd. #148

San Jose, CA 95132

Fax: 408-258-5371

TABLE OF CONTENTS

TABLE OF CONTENTS iii

TABLE OF CONTENTS

PREFACE................................................................................ i

TABLE OF CONTENTS..........................................................iii

LIST OF FIGURES ................................................................. v

CHAPTER 1..................................................................................... 1

Introducing the UCommand-616.................................................1

Unpacking the UCommand-616 .............................................1

Quick Start..............................................................................2

UCommand-616 features .......................................................4

Identifying components...........................................................5

CHAPTER 2..................................................................................... 9

Getting Started............................................................................9

Power supply........................................................................... 9

Inserting batteries.......................................................................10

Power supply precautions..........................................................11

Power supply tips .......................................................................11

Battery low icon..........................................................................11

Battery life and backlight function...............................................11

The LCD................................................................................ 12

Turning the UCommand-616 on.................................................12

Touch screen precautions ....................................................13

The Information screen......................................................... 14

UCommand-616 buttons.......................................................15

Direct access buttons.................................................................15

Touch screen buttons.................................................................16

CHAPTER 3................................................................................... 17

Operating the UCommand-616.................................................17

The main menu.....................................................................17

The device menu ..................................................................17

UCommand-616 Universal Remote Control User’s Manual

iv TABLE OF CONTENTS

The setup menu.................................................................... 18

CHAPTER 4................................................................................... 21

Programming and Customizing the UCommand-616...............21

Menu functions...................................................................... 21

Setting the clock.................................................................... 22

Using the timer......................................................................23

Timer View..................................................................................24

Timer Setup................................................................................24

Relabeling timers........................................................................25

Using the Program menu......................................................26

Using the Learning function........................................................26

Clearing a key.............................................................................30

Clearing a device........................................................................30

Clearing all devices ....................................................................31

Changing the LCD layout...................................................... 31

Resizing buttons on the Main menu...........................................32

Adding/Creating buttons.............................................................35

Relabeling buttons on the Main menu........................................37

Deleting buttons from the Main menu.........................................38

Adjusting buttons on the Device menu.......................................40

Relabeling Device menu buttons................................................41

Using Recall ...............................................................................42

Using macros........................................................................ 43

Macro setup................................................................................44

Relabeling a macro.....................................................................45

Deleting a macro ........................................................................46

The Duplicate menu..............................................................47

Making LCD adjustments......................................................48

Set the LCD contrast..................................................................49

Adjusting the LCD backlight .......................................................50

Calibrating the LCD....................................................................51

APPENDIX A ................................................................................. 53

Specifications........................................................................ 53

Troubleshooting.................................................................... 55

LIST OF FIGURES

LIST OF FIGURES v

LIST OF FIGURES

Figure 1-1: Front view...............................................................................5

Figure 1-2: Rear view ................................................................................7

Figure 2-1: Inserting the batteries ...........................................................10

Figure 2-2: Turning the LCD on..............................................................12

Figure 2-3: The Information Screen.........................................................14

Figure 2-4: Direct access buttons............................................................15

Figure 2-5: Touch screen buttons ............................................................16

Figure 3-1: The main menu......................................................................17

Figure 3-2: The TV device menu..............................................................18

Figure 3-3: The setup menu .....................................................................19

Figure 4-1: The clock menu .....................................................................22

Figure 4-2: Timer list...............................................................................23

Figure 4-3: The timer menu .....................................................................23

Figure 4-4: Setting up timer options........................................................24

Figure 4-4: Setting up timer options........................................................25

Figure 4-5: The program submenu ..........................................................26

Figure 4-6: Using the Learning eye.........................................................27

Figure 4-7: Programming devices ...........................................................28

Figure 4-8: Programming the direct access buttons................................28

Figure 4-9: The Adjust menu....................................................................31

Figure 4-10: Resize/Add screen for Main menu.......................................32

Figure 4-12: Setting upper left corner .....................................................33

Figure 4-13: Setting lower right corner...................................................33

Figure 4-14: Completing the adjustment..................................................34

Figure 4-15: Adjusted button...................................................................34

Figure 4-16: The adjust menu..................................................................35

Figure 4-17: Adjusting main menu buttons..............................................36

Figure 4-18: Adjusting buttons on the device menu.................................40

Figure 4-19: The macro list .....................................................................43

Figure 4-20: The macro menu..................................................................43

UCommand-616 Universal Remote Control User’s Manual

vi LIST OF FIGURES

Figure 4-21: The “other” menu...............................................................48

Figure 4-22: Adjusting the contrast.........................................................49

Figure 4-23: Adjusting the backlight .......................................................50

Chapter 1—Introducing the UCommand-616

Unpacking the UCommand-616

Chapter 1Chapter 1

Introducing the UCommandIntroducing the UCommand--616616

Congratulations on the purchase of your UCOMMAND-616 Universal

Remote Control. The UCommand-616 is a digital remote control that

is easy to use and configure, enabling you to control all your IR

equipped electronic devices.

A key feature of the UCommand-616 is the touch screen control panel,

which reduces the number of buttons on the device, making it easy for

you to find the function you want. You can control up to 10 devices,

including a VCR, DVD, amplifier, TV, LD/VCD, CD/multi-CD

player, Satellite receiver, HDTV receiver, and others.

The UCommand-616 is easy to set up. With the “Learning eye” you

can quickly configure each device in your household or office. You

can also easily edit the device list, make changes to the buttons on any

screen, and adjust other settings. In addition, with the Macro function,

you can initiate a chain of up to 25 commands with the touch of a but-

ton.

Most universal remote controls have a set list of devices and static

functions that don’t provide you with a lot of flexibility. The UCom-

mand-616 allows you to add and delete devices, relabel device

buttons, and change the size and shape of the LCD panel buttons. With

the convenient and easy to use UCommand-616, you can implement a

single solution to control all your devices. No longer will you have to

keep all your remotes handy, “just in case… .”

This manual will help you learn to use all the advanced

features of the UCommand-616. It will not explain how to

use your components or their remotes. Please refer to your

device user manuals for that information.

Unpacking the UCommand-616

After you have unpacked the UCommand-616, check the contents to

make sure the following items are included.

•UCommand-616

UCommand-616 Universal Remote Control User’s Manual

2Quick Start

•This User’s Manual

If any of the above items are missing or appear damaged, contact your

dealer immediately. Do not throw the shipping carton away in case

you need to ship your UCommand-616.

Quick Start

If you are already familiar with the basics of teaching commands to

universal remote controls, you can skip reading the next few chapters

right now and get started on programming right away. The following

procedure applies to almost all functions of the UCommand-616.

For detailed Programming/Learning instructions, see page 26

To program the UCommand-616 to operate any Device :

1. Turn on the remote by pressing any hard button.

2. Press and hold the menubutton until the Setup menu appears.

3. Scroll down to the Program item using the

CH+

and

CH-

buttons, and select it by pushing the mutebutton.

Pressing menualways returns you to the previous menu.

4. Select the Learning function from the Program menu.

5. Select the Device you want to learn.

6. Point the signal eye of your Device remote control at the

UC-616 Learning eye (bottom end of UC-616).

7. A screen appears showing the layout of the Direct Access

Buttons (also referred to as hard buttons) on the handle of

the UC-616. One button will look like a black dot. This is

the first button to be learned.

8. Press the corresponding button on your Device remote con-

trol, while keeping it aimed at the Learning eye. For example,

the first button to be learned on the UC-616 is the Hardware Access

Button , which equates to your Device On/Off button.

Inhaltsverzeichnis

Andere Crisp Solutions Universalfernbedienung Handbücher

Crisp Solutions

Crisp Solutions UCommand-525 Bedienungsanleitung

Crisp Solutions

Crisp Solutions UCommand UC-515 Bedienungsanleitung

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

GE 24929 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

GE RM94931 Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

GE RM24965 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

GE RM24950 Bedienungsanleitung