Crosley CR6023A Bedienungsanleitung

CR6023A

Switch Bluetooth Turntable

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. –8 p.m., EST, Monday –Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of

time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

xTurntable

xTurntable Lid

xTurntable slip mat

x45 RPM adapter

x3.5mm aux in cable

xPower adaptor

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power AC power adaptor, DC output 9V 0.4A

Power consumption 5W

Speaker 8 Ω,3W x 1

Turntable speed 331/3, 45, 78 RPM

Replacement needle Crosley NP6

Note:

xDesign and specifications are subject to change without notice.

xTo help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

2.5”,

English

Product Description

1. Turntable Platter

2. Turntable Spindle

3. Tonearm Lever

4. Auto-stop Switch

5. Tonearm Rest

6. Speed Switch

7. Hold Down Clip

8. Tonearm

9. On/Off-Volume Knob

10. Aux In Jack

11. Headphone Jack

12.Function Knob

13.Tuning Knob

14. Internal/External Speaker Switch

15.RCA Jacks

16.Spring clip speaker terminals

17.Power Jack

18.45 RPM Adapter

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Place the slip mat on top of the turntable platter.

4. Connect AC adaptor to the Power Jack of the unit.

Note: Do not plug the AC power adaptor to power outlet before all the assembly is

completed. Before turning the power on, make sure again all the connection settings

are correct. Always turn off the power when connecting or disconnecting.

Stereo System Connection

You would need to set the Internal/External switch set at the Ext. position in order

to use the external speaker system.

RCA Jacks

xThe RCA Jacks output analog line-level signals and could be connected

directly with a pair of active/powered speakers or the appropriate input of your

stereo system.

xThe Red plug connects with the Right channel and the White plug connects

with the Left channel.

Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered

speakers. If connected to the passive speakers, the volume level will be very low.

Spring clip speaker terminals

The spring clip speaker terminals deliver amplified, speaker-level signals as

output and should be connected with the passive speakers.

Aux Input Connection

You can connect an audio device to this unit and play your music through its

speakers. To do this, rotate the Function Knob to Aux In mode, connect the

3.5mm auxiliary cable between your audio device and the Aux In Jack of this

unit and start playing.

English

Bluetooth Operation

1. Turn the Function Knob to Bluetooth mode , you will hear an activation

sound from the unit.

2. Turn on the Bluetooth feature of your audio device, search for “Crosley

CR6023A” and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note: Bluetooth Version –3.0

Turntable Operation

1. Rotate the On/Off Volume Knob to turn on the power.

2. Rotate the Function Knob to PHONO position.

3. Set the Speed Switch accordingly.

4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

5. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

6. Release the tonearm Hold Down Clip.

Note: when the turntable is not in use, remember to lock back hold down clip.

7. Use the Tonearm Lever to lift up the tonearm.

8. Gently move the tonearm over the record where play is desired to begin. Set

the Tonearm Lever back to the down position, the tonearm will descend

slowly onto the record and begin to playback.

9. When the record is finished playing, use the Tonearm Lever again to raise

the tonearm and then return it to the Tonearm Rest. Release the lever to let

the tonearm sit back at its rest. To suspend the playback, repeat the same

steps.

10.Lock the Tonearm Clip to secure the tonearm.

Platter Auto-stop

If the Auto-stop Switch is set to ON position, the platter will stop spinning

automatically when the record plays to the end. In some rare occasion, if the

turntable stops playing before the end of the record, set the switch to OFF

position the turntable should overcome this issue.

English

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

Radio Operation

1. Rotate the Function Knob to FM or AM position.

2. Rotate the Tuning Knob for desired radio station.

Note:

xThe unit is equipped with a FM wire antenna. To FM improve reception, move the

wire around until the reception is clear without interferences. Do not connect the wire

to any additional antenna.

xThe AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit

for better reception.

English

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use cleanser other that contains alcohol, benzene or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

Troubleshooting

There is no power

xPower adaptor is not connected correctly.

xNo power at the power outlet.

xTo help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers

will automatically cut-off. To turn power back on and resume playing, turn off

the power and turn it on again.

Power is on, but the platter does not turn

xTurntable mode is not selected.

xTurntable’s drive belt has slipped off.

Turntable is spinning, but there is no sound, or sound not loud enough

xStylus protector is still on.

xTone arm is lift up by the lever.

xInternal/External switch set at the wrong position.

xHeadphone is plugged in.

English

FCC Statements

1.This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired

operation.

2.Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications.However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In

order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the

antenna shall not be less than 20cm (8 inches) during normal operation.

Inhaltsverzeichnis

Andere Crosley Drehscheibe Handbücher

Crosley

Crosley STACK-O-MATIC CR89 Bedienungsanleitung

Crosley

Crosley DANSETTE II BERMUDA CR6233D-RE Bedienungsanleitung

Crosley

Crosley Portfolio Bedienungsanleitung

Crosley

Crosley KEEPSAKE CR249 Bedienungsanleitung

Crosley

Crosley CR8019A Bedienungsanleitung

Crosley

Crosley CR6254A Bedienungsanleitung

Crosley

Crosley Collegiate Stack-o-Matic CR85 Bedienungsanleitung

Crosley

Crosley Player II CR6018D Bedienungsanleitung

Crosley

Crosley KEEPSAKE CR249 Bedienungsanleitung

Crosley

Crosley Gig Bedienungsanleitung

Crosley

Crosley T170A Bedienungsanleitung

Crosley

Crosley T150B Bedienungsanleitung

Crosley

Crosley CR6236A Bedienungsanleitung

Crosley

Crosley CR6019E Bedienungsanleitung

Crosley

Crosley Momento CR8018A Bedienungsanleitung

Crosley

Crosley C62 Series Bedienungsanleitung

Crosley

Crosley CR6255A Bedienungsanleitung

Crosley

Crosley CR6038A Bedienungsanleitung

Crosley

Crosley C100BT Bedienungsanleitung

Crosley

Crosley Crosley Turntable Console CR44 Bedienungsanleitung

Crosley

Crosley CR6035B Bedienungsanleitung

Crosley

Crosley C3A Bedienungsanleitung

Crosley

Crosley CR6039U Bedienungsanleitung

Crosley

Crosley Voyager Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung