Crosley CR6250A Bedienungsanleitung

CR6250A

Keepsake Deluxe Turntable

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. –8 p.m., EST, Monday –Friday

1-888-CROSLEY

www.crosleyradio.com/support

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of

time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

Turntable

Turntable slip mat

45 RPM adapter

3.5mm aux in cable

USB cable

Recording software CD

Tonearm Counterweight

Power adaptor

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power AC power adaptor, AC output 12V 0.5A

Power consumption 12W

Speaker 3”, 8Ω, 5W x 2

Turntable speed 331/3, 45 RPM

Replacement needle Crosley NP5

Note:

Design and specifications are subject to change without notice.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

Product Description

1. Turntable Platter

2. Turntable Spindle

3. Strobe Dots

4. Strobe Light

5. Tonearm Counterweight

6. Tonearm Lever

7. Hold Down Clip

8. Tonearm Rest

9. Speed Switch

10.Pitch Control

11.Tonearm

12.On-Off/Volume Knob

13.Tone Control Knob

14.USB Jack

15.Power Jack

16.Phono/Line Out Switch

17.Aux In Jack

18.RCA Jacks

19.45 RPM Adapter

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Place the slip mat on top of the turntable platter.

4. Rotate the Turntable Suspension Screw clockwise until it is all the way

down. This allows the turntable to float on its shock absorbers.

5. Slide Tonearm Counterweight onto tonearm and twist it lightly onto the rear

shaft of the tonearm.

6. Adjust the counterweight to set proper stylus pressure.

7. Connect AC adaptor to the Power Jack of the unit.

Note: Do not plug the AC power adaptor to power outlet before all the assembly is

completed. Before turning the power on, make sure again all the connection settings

are correct. Always turn off the power when connecting or disconnecting.

Tonearm Counterweight Adjustment for Stylus Pressure

1. Remove the stylus protector from the cartridge and avoid touching the stylus

tip during the adjustment.

2. Release the tonearm Hold Down Clip, gently hold the tonearm and move it

away from the Tonearm Rest. At this point, the tone arm is unbalanced and

free to swing.

3. While gently holding the tonearm, carefully rotate the Counterweight towards

the front of the turntable until the tonearm is horizontally balanced and hovers

freely just above the platter without the stylus touching the platter surface.

4. Return the tonearm to the Tonearm Rest and lock the Hold Down Clip.

5. While holding the counterweight steady without any rotation, rotate carefully

only the Downforce Scale Dial until the “0” on the scale lines up with the

centerline marked along the top of the tonearm.

6. Rotate the counterweight including the downforce scale dial counter-

clockwise (as seen from the front of the turntable) until the scale shows the

recommended pressure value for stylus.

Note: The recommended pressure for the factory-installed cartridge is 3.5+0.5g

English

Phono/Line Switch

For increased flexibility of use, this unit has a built-in stereo phono pre-amplifier.

If you prefer to use the phono input of your stereo system or your standalone

phono pre-amplifier, set the Phono/Line switch to the PHONO position.

Otherwise, please set it to LINE position and make connection to the AUX input

or other high-level input on your stereo system.

Stereo System Connection

RCA Jacks

The RCA Jacks of this unit are shared as both the Phono output jacks and the

Line output jacks. They are determined by the Phono/Line Switch.

When used as a line output, the jacks output analog line-level signals and

could be connected directly with a pair of active speakers or the appropriate

input of your stereo system. When used as a Phono output, they should be

connected to the phono pre-amp or the phono input of the stereo system.

The Red plug connects with the Right channel and the White plug connects

with the Left channel.

Note:

If the Phono/Line switch is set at LINE position but RCA jacks connected to the

stereo system’s phono input, the sound might be distorted due to input overload

and could damage your stereo system.

If the Phono/Line switch is set at PHONO position but RCA jack connected to the

stereo system’s line input, the volume will be very low due to lacking signal pre-

amplification.

RCA Jack is not designed to be connected directly to the passive/unpowered

speakers and if it does, the volume will be very low.

Aux Input Connection

You can connect an audio device to this unit and play your music through its

speakers. To do this, connect the 3.5mm auxiliary cable between your audio

device and the Aux In Jack of this unit and start playing the music.

Note: The aux in connection will automatically override the turntable function. To resume

using the turntable function, unplug the auxiliary cable from the aux in jack.

English

Turntable Operation

1. Rotate the On/Off Volume Knob to turn on the power.

2. Set the Speed Switch accordingly.

3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

4. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

5. Release the tonearm Hold Down Clip.

Note: when the turntable is not in use, remember to lock back hold down clip.

6. Use the Tonearm Lever to lift up the tonearm.

7. Gently move the tonearm over the record where play is desired to begin. Set

the Tonearm Lever back to the down position, the tonearm will descend

slowly onto the record and begin to playback.

8. When the record is finished playing, the tonearm will automatically return to

its rest. Or to suspend the playback, use the Tonearm Lever again to raise

the tonearm and return it to the Tonearm Rest. Release the lever to lower the

tonearm back to its rest.

9. Lock the Tonearm Clip to secure the tonearm.

Pitch Adjustment

There are two sets of strobe dots at the edge of the platter, upper set for AC

frequency 50Hz and bottom set for AC frequency 60Hz.

When the platter is spinning, observe the strobe dots on the edge of the

platter. As illuminated by the light coming from the strobe illuminator, if the

appropriate row of strobe dots appears to be stationary, the platter is spinning

at the precise rated speed.

If the dots appear to be moving to the right, the platter is spinning below rated

speed; if they appear to be moving to the left, the platter is spinning above

rated speed.

English

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

Cartridge Replacement

1. Before replacement, put the stylus protector back on the stylus to prevent

damage to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the tonearm that are securing the cartridge and

then remove the original cartridge.

4. Mount the new cartridge to the tonearm and tighten it lightly. Do not

completely tighten the screws at this moment.

5. Connect the wire leads to the new cartridge’s terminals .The wire lead color

codes are as below:

White Left channel positive (L+)

Black Left channel negative (L–)

Red Right channel positive (R+)

Black Right channel negative (R-)

6. Adjust the cartridge’s position to make sure it is precisely aligned on the

tonearm so that the stylus will be tracking parallel to the grooves. Tighten the

screws completely once the perfect alignment is achieved.

Note: For best result, use a cartridge alignment protractor to aid the alignment process.

7. Tighten the screws completely once the perfect alignment is achieved.

English

USB Recording

To record the vinyl into digital file formats such as MP3, you can use the USB

Output Jack to connect this unit to your computer’s USB port and use the

software Audacity.

1. Install the recording software Audacity (comes along with the product CD) to

your computer.

2. Use the supplied USB cable to connect the unit to your computer.

3. Turn on the power of the unit.

4. Run the program Audacity.

Audacity is free software, distributed under the GNU General Public License (GPL). For

most updated version of Audacity and instructions on how to use it, please visit Audacity

website: http://www.audacityteam.org/

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use cleanser other that contains alcohol, benzene or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

English

Troubleshooting

There is no power

Power adaptor is not connected correctly.

No power at the power outlet.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers

will automatically cut-off. To turn power back on and resume playing, turn off

the power and turn it on again.

Power is on, but the platter does not turn

Turntable’s drive belt has slipped off.

An aux in cable is plugged into the aux in jack, unplug it.

Turntable is spinning, but there is no sound, or sound not loud enough

Stylus protector is still on.

Tone arm is lift up by the lever.

Internal/External switch set at the wrong position.

Headphone is plugged in.

The input gain of the amplified speaker or similar device may be too low.

Inhaltsverzeichnis

Sprachen:

Andere Crosley Drehscheibe Handbücher

Crosley

Crosley CR8005F Bedienungsanleitung

Crosley

Crosley CR6249U Bedienungsanleitung

Crosley

Crosley CR6042A Bedienungsanleitung

Crosley

Crosley 1975 Turntable Bedienungsanleitung

Crosley

Crosley C62 Series Bedienungsanleitung

Crosley

Crosley CR7011A Bedienungsanleitung

Crosley

Crosley 1975 CR6038A Bedienungsanleitung

Crosley

Crosley CR74-S Bedienungsanleitung

Crosley

Crosley CR74 Bedienungsanleitung

Crosley

Crosley CR42D Bedienungsanleitung

Crosley

Crosley CR6019A Bedienungsanleitung

Crosley

Crosley Crosley Governor Console CR88- CD Bedienungsanleitung

Crosley

Crosley DANSETTE II BERMUDA CR6233D-RE Bedienungsanleitung

Crosley

Crosley Director CR2405A Bedienungsanleitung

Crosley

Crosley CR6236A Bedienungsanleitung

Crosley

Crosley C100BT Bedienungsanleitung

Crosley

Crosley CR6001A Archiver Bedienungsanleitung

Crosley

Crosley T170A Bedienungsanleitung

Crosley

Crosley CR6231D Bedienungsanleitung

Crosley

Crosley CR8017B Bedienungsanleitung

Crosley

Crosley CR8005D-TU Bedienungsanleitung

Crosley

Crosley CR6040A Bedienungsanleitung

Crosley

Crosley Gig Bedienungsanleitung

Crosley

Crosley CR6041A Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung

Bryston

Bryston BLP-1 Bedienungsanleitung