Crosley CR704B Bedienungsanleitung

CR704B

Musician Turntable

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. –6 p.m., EST, Monday –Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storms or when unused for long periods

of time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

Turntable

45 RPM adapter

3.5mm aux in cable

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power 120V, 60Hz

Power consumption 18W

Speaker 3.5”, 8Ω, 5W x 2

Turntable speed 331/3, 45, 78 RPM

Replacement needle Crosley NP6

Note:

Design and specifications are subject to change without notice.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

Product Description

1. Speakers

2. Dial Scale

3. Volume Knob

4. Function Switch

5. Aux In Jack

6. AM/FM Button

7. Play Indicator

8. Play/Pause Button

9. Stop Button

10.Repeat Button

11.Repeat Indicator

12.CD Tray

13.LED Display

14.Program Button

15.Program Indicator

16.Backward Skip Button

17.Forward Skip Button

18.CD Door Open/Close

Button

19.Headphone Jack

20.Power Button

21.Tuning Knob

22.Bluetooth Indicator

23.Turntable Platter

24.Turntable Spindle

25.45 RPM Adapter

26.Tonearm Lever

27.Tonearm

28.Auto-stop Switch

29.Speed Switch

30.Hold Down Clip

31.Tonearm Rest

English

32.External Antenna

33.Power Cord Plug

34.Cassette Eject/Fast Forward

Button

35.Cassette Door

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Plug the power cord to the power outlet.

Aux Input Connection

You can connect an audio device to this unit and play your music through its

speakers. To do this, connect the 3.5mm auxiliary cable between your audio

device and the Aux In Jack of this unit and start playing the music.

Note: The aux in connection has the highest priority of all the functions. When there is an

auxiliary cable plugged in, the aux in connection will automatically override the Bluetooth,

turntable, CD, radio or cassette mode. To resume using the other features of the unit,

unplug the auxiliary cable from the aux in jack.

Bluetooth Operation

1. Set the Function Switch to the Bluetooth position, you will hear an activation

sound from the unit.

2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY

CR704B” and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note:

Bluetooth version - 4.2

English

Turntable Operation

1. Press the Power Button to turn on the power.

2. Set the Function Switch to the TAPE/PHONO position.

Note: If a tape is inserted the tape will play instead of the turntable.

3. Set the Speed Switch accordingly.

4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

5. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

6. Release the tonearm Hold Down Clip.

Note: When the turntable is not in use, remember to lock back the hold down clip.

7. Use the Tonearm Lever to lift up the tonearm.

8. Gently move the tonearm over the record where play is desired to begin. Set

the Tonearm Lever back to the down position, the tonearm will descend

slowly onto the record and begin to playback.

9. When the record is finished playing, use the Tonearm Lever again to raise the

tonearm and then return it to the Tonearm Rest. Release the lever to let the

tonearm sit back at its rest. To suspend the playback, repeat the same steps.

10.Lock the Hold Down Clip to secure the tonearm.

Platter Auto-stop

If the Auto-stop Switch is set to the ON position, the platter will stop spinning

automatically when the record plays to the end. In some rare occasion, if the

turntable stops playing before the end of the record, set the switch to the OFF

position the turntable should overcome this issue.

English

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

Radio Operation

1. Set the Function Switch to the RADIO position, press the AM/FM Button to

set the desired radio band.

2. Rotate the Tuning Knob for the desired radio station.

Note:

The unit is equipped with a FM wire antenna. To FM improve reception, move the

wire around until the reception is clear without interferences. Do not connect the wire

to any additional antenna.

The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit

for better reception.

English

CD Playback Operation

1. Set the Function Switch to the CD position.

2. Press the Open/Close button to open the CD tray and put the CD in the tray

with the labeled side facing up.

3. Press the Open/Close button again to close the tray. The LED display will

show “--“ for a few seconds, then the total number of tracks on the CD. If it is

a blank CD or an unrecognizable CD, it will show “00”.

Note: MP3 or similar types of digital audio files cannot be read by the CD player.

4. Press the Play/Pause button to start the playback. The Play Indicator will light

up.

5. During the playback, press the Play/Pause button to pause and the Play

Indicator will starting flashing. Press it again to resume playback.

6. To skip to the next or previous track, press the Forward Skip or Backward

Skip button correspondingly.

7. To search fast forward or backward, press and hold the Forward Skip or

Backward Skip button correspondingly until you reach the desired time.

Release the button and the playback will resume.

8. Press the Stop button if you want to completely stop playback.

Programmed Playback

1. Before starting the playback, press the Program button once to enter

program mode. The Program Indicator will start flashing. The LED display

will flash “01” as the track sequence which is to be edited.

2. Press the Forward Skip or Backward Skip buttons to select the desired

track that you would like to play. The LED’s number will turn steady

instead of flashing, showing the sound track number at selection.

3. Press the Program button to confirm the selected track. The LED’s

number will start flashing again showing the next track sequence which is

to be edited.

4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.

The tracks can be in any number and repeated. A maximum of 20 tracks

can be programmed at one time.

5. Press the Play/Pause button to start the programmed playback. The

tracks will play in the same sequence that you programmed earlier.

6. To exit the program mode, press the Stop button twice and the Program

Indicator will be off.

English

Cassette Operation

1. Set the Function Switch to TAPE/PHONO position.

2. Insert the prerecorded cassette through the cassette door and it will start

playing automatically.

3. To fast forward, press the cassette Eject/F.F button half way in. To stop fast

forwarding and return to the playback mode, press the button again.

Note: To rewind the cassette, you would need to reject the tape and flip it over for the

other side and fast forward.

4. To stop the playback and eject the cassette, press the Eject/F.F. button all the

way in.

5. When one side of the cassette finishes playing, it will stop automatically.

Note: Remove the cassette from the cassette holder when it is not in use.

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use a cleanser that contains alcohol, benzene, or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

Inhaltsverzeichnis

Sprachen:

Andere Crosley Drehscheibe Handbücher

Crosley

Crosley CR6007A Bedienungsanleitung

Crosley

Crosley T150A Bedienungsanleitung

Crosley

Crosley STACK-O-MATIC CR89 Bedienungsanleitung

Crosley

Crosley Momento CR8018A-DD Bedienungsanleitung

Crosley

Crosley Anthology Bedienungsanleitung

Crosley

Crosley CR6020A Revolution Bedienungsanleitung

Crosley

Crosley CR6001A Archiver Bedienungsanleitung

Crosley

Crosley C100BT Bedienungsanleitung

Crosley

Crosley Coda Bedienungsanleitung

Crosley

Crosley Rochester CR7021A Bedienungsanleitung

Crosley

Crosley CR42E-PA Bedienungsanleitung

Crosley

Crosley Crosley Turntable Console CR44 Bedienungsanleitung

Crosley

Crosley Player II CR6018D Bedienungsanleitung

Crosley

Crosley Director CR2405C Bedienungsanleitung

Crosley

Crosley L-79 Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Crosley

Crosley T160A Bedienungsanleitung

Crosley

Crosley CR42C Lancaster Bedienungsanleitung

Crosley

Crosley Cruiser Plus CR8005F Bedienungsanleitung

Crosley

Crosley C20A Bedienungsanleitung

Crosley

Crosley CR8005F Bedienungsanleitung

Crosley

Crosley Cruiser Deluxe CR8005D Bedienungsanleitung

Crosley

Crosley CR6043A Bedienungsanleitung

Crosley

Crosley CR6023A Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung