Crosley T150A Bedienungsanleitung

T150A

Stereo Turntable System

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. – 6 p.m., EST, Monday – Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of

time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

•Turntable

•Turntable Slip Mat

•45 RPM adapter

•Speaker wire

•Power adaptor

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power AC power adaptor, DC output 12V 1.5A

Power consumption 35W

Speaker 4”, 4Ω, 15W x 2

Turntable speed 331/3, 45 RPM

Replacement needle Crosley NP5

Note:

•Design and specifications are subject to change without notice.

English

Product Description

1. Turntable Platter

2. Turntable Spindle

3. Tonearm Counter Weight

4. Cue Lever

5. Tonearm Rest

6. Tonearm

7. Function Knob

8. Pitch Control

9. Volume Knob

10.Power Indicator

11.Phono/Line Switch

12.RCA Jacks

13.Speaker Output Terminals

14.Power Jack

15.Power Switch

16.Speaker Input Terminals

17.45 RPM Adapter

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Install the turntable platter and drive belt accordingly

4. Place the slip mat on top of the turntable platter.

5. Slide Tonearm Counterweight onto the rear shaft of

tonearm and push it as close to the stop point as possible.

This will automatically set the needle’s down force to be

in range for the factory fitted needle (3.5g-4g).

6. Use the Speaker Wire to connect the left and right speakers’ Input Terminals

to the turntable’s Output Terminals correspondingly. Make sure the left and

right channels are connected correctly.

7. Connect AC adaptor to the Power Jack of the unit.

Note: Do not plug the AC power adaptor to power outlet before all the assembly is

completed. Before turning the power on, make sure again all the connection settings

are correct. Always turn off the power when connecting or disconnecting.

Turntable Platter and Belt Setup

1. Install the drive belt over the inner ring under the platter and make sure it

won’t fall off during the setup.

2. Place the platter through the turntable spindle, then rotate the platter until you

see the drive motor pulley through the window at the top right corner.

3. Carefully grab the drive belt and put it around the slot of motor pulley.

Phono/Line Switch

For increased flexibility of use, this unit has a built-in stereo phono pre-amplifier.

If you prefer to use the phono input of your stereo system or your standalone

phono pre-amplifier, set the Phono/Line switch to the PHONO position.

Otherwise, please set it to LINE position and make connection to the AUX input

or other high-level input on your stereo system.

English

Stereo System Connection

RCA Jacks

•The RCA Jacks of this unit are shared as both the Phono output jacks and the

Line output jacks. They are determined by the Phono/Line Switch.

•When used as a line output, the jacks output analog line-level signals and

could be connected directly with a pair of active speakers or the appropriate

input of your stereo system. When used as a Phono output, they should be

connected to the phono pre-amp or the phono input of the stereo system.

•The Red plug connects with the Right channel and the White plug connects

with the Left channel.

Note:

−If the Phono/Line switch is set at LINE position but RCA jacks connected to the

stereo system’s phono input, the sound might be distorted due to input overload

and could damage your stereo system.

−If the Phono/Line switch is set at PHONO position but RCA jack connected to the

stereo system’s line input, the volume will be very low due to lacking signal pre-

amplification.

−RCA Jack is not designed to be connected directly to the passive/unpowered

speakers and if it does, the volume will be very low.

Spring clip speaker terminals

The spring clip speaker terminals deliver amplified, speaker-level signals as

output and should be connected with the passive speakers.

Turntable Operation

1. Press the Power Switch to turn on the power.

2. Rotate the Function Knob to either 33 1/3or 45 RPM mode to select the

turntable speed accordingly. Use the 45 RPM Adapter if necessary

3. Place the record on the turntable.

4. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

5. Lift up the Tonearm and move it over the record where play is desired to

begin. Gently put down the Tonearm and begin the playback.

6. When the record is finished playing, gently lift up the Tonearm and move it

back to the Tonearm Rest. To suspend the playback, repeat the same steps.

English

Pitch Control

The turntable speed can be increased or decreased by approximately 10% by

rotating the Pitch Control Knob. To increase the speed, turn the Pitch Control

Knob clockwise. To decrease the speed, turn the knob counter-clockwise.

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

Bluetooth Operation

1. Turn the Function Knob to Bluetooth mode , the Power Indicator will start

flashing blue.

2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY

T150” and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note: Bluetooth version – 4.2

English

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable cabinet with a slightly damped microfiber cloth.

Note: Do not use cleanser other that contains alcohol, benzene or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

Troubleshooting

There is no power

•Power adaptor is not connected correctly.

•No power at the power outlet.

Power is on, but the platter does not turn

•Turntable’s drive belt has slipped off.

•Turntable is under Bluetooth Mode.

Turntable is spinning, but there is no sound, or sound not loud enough

•Stylus protector is still on.

English

FCC Statements

FCC Caution:

1. This device complies with Part 15 of the FCC rules/ Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

2. This device and its antenna(s) must not be co-located or operating in conjunction with

any other antenna or transmitter.

3. Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio TV technician for help.

Andere Handbücher für T150A

Inhaltsverzeichnis

Andere Crosley Drehscheibe Handbücher

Crosley

Crosley C8A Bedienungsanleitung

Crosley

Crosley Crosley Conductor CR73 Bedienungsanleitung

Crosley

Crosley CR-77CD Bedienungsanleitung

Crosley

Crosley CR6043A Bedienungsanleitung

Crosley

Crosley Executive Deluxe Bedienungsanleitung

Crosley

Crosley Rochester CR7021A Bedienungsanleitung

Crosley

Crosley CR6253C Bedienungsanleitung

Crosley

Crosley CR6038A Bedienungsanleitung

Crosley

Crosley CR6034A Bedienungsanleitung

Crosley

Crosley CR7011A Bedienungsanleitung

Crosley

Crosley CR6026A Bedienungsanleitung

Crosley

Crosley CR8009 Bedienungsanleitung

Crosley

Crosley Cruiser Plus CR8005F Bedienungsanleitung

Crosley

Crosley Coda Bedienungsanleitung

Crosley

Crosley Cruiser Plus Bedienungsanleitung

Crosley

Crosley Cruiser Deluxe CR8005D Bedienungsanleitung

Crosley

Crosley CR74-S Bedienungsanleitung

Crosley

Crosley CR6019F Bedienungsanleitung

Crosley

Crosley CR704B-PA Bedienungsanleitung

Crosley

Crosley T160A Bedienungsanleitung

Crosley

Crosley CR7020A Bedienungsanleitung

Crosley

Crosley CR8005D-TU Bedienungsanleitung

Crosley

Crosley C200 Bedienungsanleitung

Crosley

Crosley CR711 Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung