SAFETY PRECAUTIONS
When using any electrical appliance,basic safety precautions should always be
followed,including the following:
1. Read all instructions and keep for future reference.
2. This appliance is not intended for use by persons(including children) with reduced
physical,sensory or mental apabilities, or lack of experience and knowledge,unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
3. Young children should be supervised to ensure that they do not play with the
appliance.
4. Always unplug the appliance from the mains when not in use .
5. To disconnect the appliance,switch the control to OFF,then unplug from the mains.
6. To unplug the appliance,always grasp the plug;do not pull the cord.
7. If the supply cord is damaged it must bereplaced by the manufactuer, its service agent or a
similarly qualified person in order to avoid a hazard.
8. Do not use outdoors. This appliance is designed for household use only.
9. Place the power cable away from areas where people walk so that it cannot be
stepped on or tripped over.
10. Always use the appliance on a flat ,stable surface.
11.Never clean this appliance when it is plugged in .Do not immerse it in water, Clean the
outside surface with a damp cloth or soft brush and dry with a soft dry cloth.
12.Use the appliance only as directed in this manual. Misuse could void your warranty.
13. Avoid contact with moving parts, Never insert any objects through the grille when the fan
is in operation
ASSEMBLY INSTRUCTION:
Base Assembly
1.Unscrew the Fasten Ring and Base Locking
Nut from the Stand Assembly.
2. Insert the Stand Assembly through the hole in
the center of the Base and twist into position.
3. Turn the Stand Base upside down with the Stand
Assembly facing the floor and place the Base
Weight Support to the bottom of the Base.
Tighten the Base Weight Support to the Stand
Base by screwing back the Ring and
