CTC Union FRM220-1000E-1 Bedienungsanleitung

The FRM220-1000E(S)-1 is a copper to fiber Gigabit Ethernet

solution designed to make conversion between 10/100/1000

Base-TX and 1000Base-SX/LX with SC or SFP LC connector.

With SNMP and Web-based mana

ement in the FRM220, the

Introduction

Network administrator can monitor, configure and control the

activity of each card in the chassis. This converter also supports

features such as ingress/egress bandwidth control, auto or forced

mode setting for copper Ethernet as well as auto laser shutdown.

Features

¾Network Management via FRM220 chassis

¾10/100/1000Base-T to 1000Base-SX/LX SFP Managed card

¾Auto-negotiation or forced mode

¾Auto MDI/MDIX

¾Forward 1632 bytes (max.) packets

¾Su

ort Bandwidth Control

(

70k ~ 250Mb

)

pp ( p )

¾Supports Flow control (Pause)

¾Support Link fault pass through (LFP) function in Port VLAN mode

¾Supports remote CPE power fail detect (dying gasp)

¾Auto Laser Shutdown (ALS) in Switch mode

¾Online f/w upgrade

Panel

•Figure #1. Upper Panel of FRM220-1000E(S)-1

•

Figure #2 Stand

alone rear panel of FRM220

1000E(S)

•

Figure

Stand

alone

rear

panel

FRM220

1000E(S)

CH01 CH01-AA CH01-DD CH01-AD CH01-DC CH01-AC

Use

Guide

CTC Union Technologies Co., LTD.

WWW . CTCU . COM

•Gigabit Ethernet over Fiber Media Converter

•FRM220-1000E(S)-1

Specification

Standard

IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T,

IEEE802.3z 1000Base-SX/LX, Gigabit Standards

10/100/1000Base-T RJ-45 Connectors

1000ES-1 : One RJ45 connector is provided for UTP cable connection

1000E-1 : One RJ45 connector is provided for UTP cable connection

All RJ45 ports utilizing auto MDI/MDIX which allow all UTP connections for both

All

RJ45

ports

utilizing

auto

MDI/MDIX

which

allow

all

UTP

connections

for

both

straight and crossover UTP cable.

RJ-45 Pin 568-A type 568-B type

5 Pair1-Tip Pair1-Tip

4 Pari1-Ring Pair1-Ring

3 Pair2-Tip Pair3-Tip

6 Pair2-Ring Pair3-Ring

1 Pair3-Tip Pair2-Tip

2 Pair3-Ring- Pair2-Ring

7 Pair4-Tip Pair4-Tip

Pair4

Ring

Pair4

Ring

Pair4

Ring

Pair4

Ring

Application

1000Base-X Fiber Optic Connectors

1000ES-1 : One SFP slot LC connector is provided for optic cable connection

1000E-1 : One SC connector is provided for optic cable connection

Environment

Operating --0 to 60℃, Storage --0 to 70℃, Humidity -- 10 to 90%, (non-condensing)

Dimensions: (DxWxH)mm 155x88x23mm

Power

Adapter: 12V DC 1A,

Built-in AC Power 100~240 V,

Built-in DC Power 18~72VDC

LED Indicators

LED Function State Status

PWR Power indicator On Converter has power.

Off Converter has no power.

Link1, Link2 Fiber link1,Link2 On Link on

Off No link or the link is faulty.

Blink Receiving data on the fiber

2CH Operation mode On 2-channel converter mode

Off 4-port switch mode

LFP LFP mode On

Link Fault Pass Through enable

LFP

mode

Link

Fault

Pass

Through

enable

Off Link Fault Pass Through disable

UTP Port LED Indicators

Speed

UTP Link

UTP

Port

LED

Indicators

LED Function State Status

Speed mode display Yellow 1000Base-TX.

Green 100Base-TX

Off 10Base-T.

Link Ethernet link On The UTP link is ok.

Off No link or the link is faulty.

Blink Receiving data on Ethernet.

1000E(S)-1 DIP Switch:

DIP SW1 for LAN1 Setting

Pin 1 Pin 2 Pin 3 Pin 4 Function

Off Off Off - UTP/ N-Way

On Off Off - UTP 1000Mbps/Full

Off On Off - UTP 100Mbps/Full

Off On On - UTP 100Mbps/Half

On On Off - UTP 10Mbps/Full

On On On - UTP 10Mpbs/Half

- - - On LFP On (used in port vlan mode)

---

Off

LFP Off (used in

port

valn

mode)

Off

LFP

Off

(used

port

valn

mode)

Note:

• If all types of slide-in card were installed in FRM220 chassis, The

SNMP command will takeover the Dip switch setting.

• Standalone unit only support port vlan mode

• Line card in FRM220 chassis support both switch and port vlan mode

Link-Fault-Pass Through (LFP) Application Note

This media converter incorporates a Fiber Pass Through

feature which allows indirect sensing of a Fiber Link Loss

via the 10/100/1000 Base-TX UTP connection. Whenever the

media converter detects a Link Loss condition on the

Receive fiber (Fiber LNK OFF), it disables its UTP

transmitter so that a Link Loss condition will be sensed on

the receive UTP port. (See the following figure) The link

loss can then be sensed and reported by a Network

M h UTP ' h i

anagement agent at t

e remote

UTP

port

ost equ

pment.

This feature has no effect on the media converter's UTP

LNK LED, which continues to function normally, independent

of the state of the Fiber LNK LED and the UTP transmitter.

This feature is enabled by default on all the FIB1-1000

family media converters.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CTC Union Medienkonverter Handbücher

CTC Union

CTC Union FMC-10/100I series Bedienungsanleitung

CTC Union

CTC Union FRM220-FXO-4 Bedienungsanleitung

CTC Union

CTC Union IMC-1000M Bedienungsanleitung

CTC Union

CTC Union FMC-1000-PH Bedienungsanleitung

CTC Union

CTC Union FIB1-10/100 series Bedienungsanleitung

CTC Union

CTC Union FRM220-CCF40 Bedienungsanleitung

CTC Union

CTC Union FRM220-100M Bedienungsanleitung

CTC Union

CTC Union IMC-1000MS-PH12 Bedienungsanleitung

CTC Union

CTC Union IMC-1000M-PH12 Bedienungsanleitung

CTC Union

CTC Union FMC-1001S Bedienungsanleitung

CTC Union

CTC Union FRM220A Handbuch

CTC Union

CTC Union IMC-1000-PH12 Bedienungsanleitung

CTC Union

CTC Union FRM220 Bedienungsanleitung

CTC Union

CTC Union FRM220-100AS-1 Bedienungsanleitung

CTC Union

CTC Union FRM220-1000ES-2F Bedienungsanleitung

CTC Union

CTC Union FRM220-10 Bedienungsanleitung

CTC Union

CTC Union FRM220-1000MS Bedienungsanleitung

CTC Union

CTC Union FRM220-100M Bedienungsanleitung

CTC Union

CTC Union FMC-1001S Bedienungsanleitung

CTC Union

CTC Union FMC-2000MS Bedienungsanleitung

CTC Union

CTC Union FIB1-1000ES Bedienungsanleitung

CTC Union

CTC Union IFC-Serial Bedienungsanleitung

CTC Union

CTC Union FRM220-10/100iS-2 Bedienungsanleitung

CTC Union

CTC Union DVS-8501D Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung