Cuddeback IR Bedienungsanleitung
is device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: is equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. ese limits are designed
to provide reasonable protection against harmful
interference in a residential installation. is equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the
following measures: --Reorient or relocate the receiving
antenna. --Increase the separation between the equipment
and receiver. --Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician
for help.
Send us your photos and you may win a
free Cuddeback®
Got a great picture? A big deer or a special
scene? A funny situation or beautiful
colors? We want to see them and give you
a chance to win a free Cuddeback. Visit
http://cuddeback.com/contest to enter
your best pictures into our photo contest.
Contest entry also allows you to become a
CuddeBacker and receive special promo-
tions, rebates and other discount oers.
Like Us
Let us know how you like our cameras,
and feel free to suggest improvements.
In this connected world, your reviews
do make a dierence. Please support us
online by writing a positive review on
any of the retail or forum websites. We
thank you for your support.
Please Update
We never stop improving our products.
Firmware updates allow your camera
to
be improved with enhanced performance
and new features. Refer to Appendix B:
Firmware, for instructions.
Battery Notice
Remove batteries when the camera is not going to be
used for an extended period of time. Failure to follow
these
guidelines may result in battery leakage, which will
damage
your camera.
✓Never mix old and new batteries.
✓
Never mix dierent types of batteries.
✓Never mix lithium and alkaline batteries.
✓
Replace all batteries at the same time.
✓
Always remove batteries when the
camera won’t
be used for an extended period of time.
✓Dispose of batteries properly as recommended
by the manufacturer.
SD Card Notice
is Cuddeback camera is compatible with secure digital
(SD) cards sizes 2GB to 32GB. Do not use SDXC cards.
Micro SD cards will
function with the proper adapter
(usually
included with the micro SD card).
Treat your SD cards well. ey are very sophisticated
electronic devices made with billions of static-sensitive
transistors. Keep them dry and do not bend them.
WARNING – Never insert a wet or damp
SD card into your camera or computer.
Internal Memory
You can use this camera without an SD card. Up to
120MB of internal memory is available for image storage.
Note: Videos and time-lapse images cannot be stored to
internal memory. Images stored in internal memory must
be copied to an SD card for retrieval.
is feature is handy if you check a camera without a
spare SD card. You can remove the SD card and take it
home, yet still leave the camera aeld. When you return,
all you need to do is install the SD card and transfer
images from internal memory to the SD card.
Cuddeback®IR Operating Instructions
What You Need
1. One or more secure digital (SD) cards.
Compatible with SD cards up to 32GB.
2. Eight AA batteries (we recommend
Rayovac®or Duracell®brand batteries).
3.
When Cuddeback
®
IR is running it displays
an
electronic “worm” on the LCD. This worm scrolls
around the LCD to indicate that you must not remove
the SD card, must not turn the rotary knob, and must
not press any button. Please be patient and wait for
the worm to go away before removing the SD card.
“Worm”
1
2
Zone Control
Cuddeback’s patent-pending Zone Control allows you to
select wide-angle view or centered-subject view. Position
the shutter as appropriate for your needs. Be aware that
wide-view mode can generate more blank images when
deer move to the edges of the view.
Zone Control
Centered-Subject Setting
Zone Control
Wide-Angle Setting
Step 1: Getting Familiar With the
Cuddeback® IR Camera
Take a moment to familiarize yourself with Cuddeback
®
IR
camera parts.
Motion-
Heat
Sensor
M
H
S
Front Back
Back
Test
LED
SD
Card
Socket
Mount
Bracket
Strap
Slots
LCD
Screen
Rotary
Knob
A/B
Buttons
User
Interface
LED
Camera
Lens
User Interface
Door
Battery Door
Infrared
LEDs
Back
Top
3
Step 2: Installing Batteries and SD Card
1. Turn the rotary knob to the OFF position.
2. Open latch to the battery compartment door.
Install 8 AA alkaline or 8 AA lithium batteries.
Lithium batteries will
provide longer battery life
and better night IR images.
Make sure to observe
correct polarity. Close the door and secure latch.
3.
A series of numbers display. These are the
Cuddeback
®
IR camera’s
hardware and software
version numbers.
4. Wait until the LCD display goes blank and the
green and red LEDs are off.
5. Install your SD card. Be sure to observe the correct
polarity, with clipped corner on the card to the right.
Bottom View Top View
Battery Install SD Card Install
4
Step 3: Setting Up the Cuddeback®IR
1. Turn the rotary knob to Time position,
press A and B to set. Time is AM/PM format.
2. Turn the rotary knob to Date position,
press A and B to set.
3. Turn the rotary knob to Year position,
press A and B to set.
4.
Later you will read “Step 8 – Using More Features”
for information on the MENU positions.
Step 4: Attaching
Cuddeback®IR
to a Tree
1.
We recommend you first try your Cuddeback
®
IR
camera at home.
2. For optimum detection of deer and similar-size
animals, we
recommend mounting
Cuddeback
®
IR
about
30 to 36 inches off the ground, roughly
waist high.
3. For best image quality, install
Cuddeback
®
IR
about 10 to 15 feet from where animals are expected
.
Note that detection distance varies greatly with
air
temperature, animal size and the speed the animal
is moving.
5
Inhaltsverzeichnis
