CUE keyboardCUE-S Bedienungsanleitung

User Manual
Small Keyboards
Version 02
CUE, a.s., K Nouzovu 6, 143 00 Praha 4, Czech Republic
Phone: +420 241 091 240, Fax: +420 241 432 446

User Manual Small Keyboards
UM022_02, 21.05.2007
Copyright © CUE, a.s., Praha, Czech Republic 1990 - 2007.
All rights reserved. Specifications are subject to change without prior notice.

Table of Contents
1. Introduction.................................................................................................................................... 4
1.1. Overview .......................................................................................................................................................................4
1.2. Models...........................................................................................................................................................................4
1.3. Features........................................................................................................................................................................4
1.4. Programming.................................................................................................................................................................4
2. Front Panel..................................................................................................................................... 5
3. Button Labels................................................................................................................................. 6
4. Addressing..................................................................................................................................... 7
4.1. Addressing of keyboardCUE-S (serial number up to CS0174.0128) and keyboardCUE-S /w .....................................7
4.2. Addressing of keyboardCUE-S (serial number CS0174.0129 and above) ...................................................................8
4.2.1. Setting-up of ADDRESS......................................................................................................................................9
4.2.2. Troubleshooting...................................................................................................................................................9
4.2.3. Display ADDRESS...............................................................................................................................................9
4.2.4. Display Firmware version ....................................................................................................................................9
5. Mounting....................................................................................................................................... 10
5.1. keyboardCUE-S ..........................................................................................................................................................10
5.2. keyboardCUE-S /w......................................................................................................................................................10
6. Connecting................................................................................................................................... 11
6.1. keyboardCUE-S ..........................................................................................................................................................11
6.2. keyboardCUE-S /w......................................................................................................................................................11
7. Specifications and Mechanical Drawings................................................................................. 12
7.1. keyboardCUE-S ..........................................................................................................................................................12
7.2. keyboardCUE-S /w......................................................................................................................................................13
8. Software and Firmware License................................................................................................. 14
9. Warranty Conditions ................................................................................................................... 15
10. CE Declaration of Conformity..................................................................................................... 16
11. FCC................................................................................................................................................ 17
User Manual Small Keyboards
www.cuesystem.com
Page 3 of 18

1. Introduction
1.1. Overview....................................................................
The elegant and innovative wired keyboardCUE-S is a tabletop programmable control panel that is
available in varieties of solid wood finishes with stainless steel trim. The keyboardCUE-S provides 8
buttons supported with backlighting and user changeable button labels that can be directly printed on
a laser printer and inserted into the switch caps. The full-function console keyboard may be used as a
dedicated wired controller for audio, video and environmental functions.
The wired keyboardCUE-S /w is a programmable control panel device designed to be built into a table.
Available in a metal enclosure, the keyboardCUE-S /w provides 8 buttons supported with backlighting.
User changeable button labels can be directly printed on a laser printer and inserted into the switch
caps. The full-function console keyboard may be used as dedicated wired controller for audio, video
and environmental functions.
1.2. Models........................................................................
Model Product code Description
keyboardCUE-S CS0174 Tabletop keyboard, (8) buttons
keyboardCUE-S /w CS0146 Built-in keyboard, (8) buttons
1.3. Features .....................................................................
•Backlight buttons
•Programmable feedback indication (tabletop model only)
•User changeable button labels
•Stainless steel front panel and wooden enclosure (tabletop model)
•Tabletop or built-in installation
•System connection by CUEwire
1.4. Programming .............................................................
All keyboards are programmed using Cue Director programming tool. Control commands are
described in the Programming Manual CPL References, chapter Keyboards.
User Manual Small Keyboards
www.cuesystem.com
Page 4 of 18

2. Front Panel
The front panel is equipped with (8) buttons and (8) indication LEDs (tabletop model only) - see
picture.
(8) buttons
(8) button LEDs
(8) buttons
Button LEDs are controlled by special programming commands from a control unit.
User Manual Small Keyboards
www.cuesystem.com
Page 5 of 18

3. Button Labels
The separate labels for each button can be printed on a transparency foil using laser or inkjet printer.
Dimension of the label are
•6.5 mm x 12 mm for normal button
•6.5 mm x 29 mm for double button.
It is necessary to disassembly the control panel to change a label.
Steps are
1. Put the control panel on a table face down.
2. Unscrew the screws.
3. Dismount the bottom of the control panel with electronic board.
4. Install new label.
5. Assembly the control panel.
User Manual Small Keyboards
www.cuesystem.com
Page 6 of 18

4. Addressing
4.1. Addressing of keyboardCUE-S (serial number up to
CS0174.0128) and keyboardCUE-S /w
The ADDRESS of the keyboardCUE-S and keyboardCUE-S /w can be set in the range 0 to 9 by the
firmware. Standard keyboards have address 0, addresses 1 to 9 are delivered on a special order.
The BUTTON_ID transmitted by a panel and BUTTON_LED_ID (tabletop model keyboardCUE-S only)
are numbers used in the programming for button and bargraph identification. Both values depend on a
button position and it depends on a keypad ADDRESS too. Both values are calculated according
formulas
BUTTON_ ID = Offset + Button Code
BUTTON_LED_ID = Offset + Button Code
Offset = 32 * ADDRESS
The lowest BUTTON_ID is generated by a button in the upper left corner the highest BUTTON_ID is
generated by a button in the lower right corner - see example for ADDRESS = 0 on the picture below.
12
34
56
78
12
34
56
78
Button LED Code = 1 Button Code = 1 Button Code = 1
In the table below there is Button ID range for each address.
ADDRESS BUTTON_ID range = BUTTON_LED_ID range
0 1 8
1 33 40
2 65 72
3 97 104
4 129 136
5 161 168
6 193 200
7 225 232
8 257 264
9 289 296
User Manual Small Keyboards
www.cuesystem.com
Page 7 of 18

4.2. Addressing of keyboardCUE-S (serial number
CS0174.0129 and above)
The ADDRESS of the keyboardCUE-S can be set in the range 0 to 255. Default keyboard ADDRESS
is 0.
The BUTTON_ID transmitted by a panel and BUTTON_LED_ID (tabletop model keyboardCUE-S only)
are numbers used in the programming for button and bargraph identification. Both values depend on
a button position and it depends on a keyboard ADDRESS too. Both values are calculated according
formulas
BUTTON_ ID = Offset + Button Code
BUTTON_LED_ID = Offset + Button Code
Offset = 32 * ADDRESS
The lowest BUTTON_ID is generated by a button in the upper left corner the highest BUTTON_ID is
generated by a button in the lower right corner - see example for ADDRESS = 0 on the picture below.
In the table below there is Button ID range for some addresses.
ADDRESS BUTTON_ID range = BUTTON_LED_ID range
0 1 8
1 33 40
2 65 72
… … …
9 289 296
User Manual Small Keyboards
www.cuesystem.com
Page 8 of 18

4.2.1. Setting-up of ADDRESS
SW9
1. Unscrew two screws on bottom side of the keyboard and remove bottom cover.
2. Push switch SW9 on PCB bottom side; backlight LED’s are switched Off to indicate Set
Address Mode.
3. Button LED’s indicate ADDRESS in binary code – Button 1 bit 0, Button 2 bit 1 etc… Push
buttons to toggle address bits to requested value of ADDRESS (see examples on the picture
below).
4. Push switch SW9 to save ADDRESS to non-volatile memory and to enter keyboard Standard
Mode - backlight LED’s are switched On to indicate Standard Mode.
5. Assembly the control panel.
4.2.2. Troubleshooting
Flashing backlight LED’s means non-volatile memory ERROR. Try Power OFF – Power ON sequence
to restart device and set ADDRESS again.
4.2.3. Display ADDRESS
Press and hold Button 1 while powering On. Button LED’s indicate ADDRESS in binary code –
Button 1 bit 0, Button 2 bit 1, .... After 10 sec keyboard continues normal operation.
4.2.4. Display Firmware version
Press and hold Button 2 while powering ON. All LED’s flashes 5 times – FW version 1.05. After 10 sec
keyboard continues normal operation.
User Manual Small Keyboards
www.cuesystem.com
Page 9 of 18

5. Mounting
5.1. keyboardCUE-S...........................................................
The keyboardCUE-S is a tabletop model. There are no special mounting requests.
5.2. keyboardCUE-S /w .....................................................
The keyboardCUE-S /w can be mounted to the table or to the wall box (not delivered).
User Manual Small Keyboards
www.cuesystem.com
Page 10 of 18
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CUE Tastenfeld Handbücher


















