Custom Dynamics MAGIC-STROBES-HD Bedienungsanleitung

Custom Dynamics® Magic Strobes™ Brake Flasher

Installation Instructions

We thank you for purchasing the Custom Dynamics® Magic Strobes

Brake Light Flasher! Our products utilize the latest technology and

high quality components to ensure you the most reliable service. We

offer one of the best warranty programs in the industry and we back

our products with excellent customer support, if you have questions

before or during installation of this product please call Custom

Dynamics® at 1(800) 382-1388.

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

08-2015SM

Part Number: MAGIC-STROBES-HD

Installation

Package Contents:

- Magic Strobes™ Brake Flasher (1)

- Tie Wraps (5)

'96-'10 Softails (except Convertible, Rocker and Breakout), '97-'11

Dynas, '97-'13 Touring (Except '10-'13 Street Glide/Road Glide Cus-

tom), '99-'03 Sportsters, '10-'13 HD Trikes; '11-'13 Road Glide Ultra

ATTENTION

Please read all Information below before Installation

Important: Module must be secured after installation.

Find safe area away from any moving parts and out of the

way of normal operation of the bike. Use the enclosed tie-

wraps to secure. Custom Dynamics® is not liable for damage

as a result of improperly securing or failing to secure the

module.

Note: When using a Magic Strobe™ with a Signal Stabi-

lizer™ or other Load Equalizer we recommend to install the

Magic Brake Strobe™ after (towards the taillight) the Signal

Stabilizer or Load Equalizer. (See Diagram)

Note: When using a Magic Brake Strobe™ with a Run-

Brake-Turn Controller, we recommend the following:

-To flash Brake and turns, Install Magic Strobe™ Before Run-

Brake-Turn Controller. (See Diagram)

-To flash only the center taillight, install Magic Strobe™ After

Run-Brake-Turn Controller. (See Diagram)

Important: Customers using this module with standard

incandescent bulbs should use patterns 0-3 only. Any other

settings selected will result in diminished performance.

Caution: A stuck brake switch may cause this unit to

overheat and fail . Unplug module immediately if this condi-

tion occurs.

Note: Although this device has been designed to significantly in-

crease your braking visibility, flash/strobe patterns may not be street

legal in your area. This Device is not DOT approved.

1. Secure motorcycle on level surface.

2. Remove seat or side panel, depending on

model.

3. Disconnect negative [ - ] battery cable from

the battery.

4. Locate and unplug the lighting connector to the

rear fender.

5. Plug the Magic Strobes™ Module, in-line, into

the rear lighting harness and into the bike’s

wiring harness.

6. Re-connect the battery’s negative battery

cable to the negative [ - ] of the battery.

7. Select Desired Pattern on the dial with power

Off. (See page 2 for Pattern Information)

8. Check Operation.

9. To change pattern, turn bike OFF and change

dial to desired pattern.

10. Locate a secure place for the Magic Strobes™

unit that will not interfere with the secure

placement of the seat. Secure with the en-

closed tie-wraps so that unit will not move.

Installation Instructions - Page 2

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

08-2015SM

Flash Pattern Information

1 9

Pattern 0: Four Flashes then Solid

Pattern 1: Four Flashes, Solid for 3

Seconds, Repeat

Pattern 2: Seven Flashes then

Solid

Pattern 3: Seven Flashes, Solid for

3 Seconds, Repeat

Pattern 4: Quad Strobe then Solid

for 1 Second then Quad Strobe

Pattern 5: Quad Strobe, Solid for 1 Second,

then Quad Strobe, Solid for 3 Seconds, then

Repeat

Pattern 6: Blaster X Pattern for 3

seconds, then Solid

Pattern 7: Constant Blaster X Pattern

Pattern 8: Constant Fast Strobe 5

Seconds, then Solid

Pattern 9: Constant Fast Strobe Pattern

Incandescent or LED

LED Only

Module Placement

Signal Stabilizer™

or load Equalizer

Tail Light

Signal Stabilizer™

or load Equalizer

Magic Strobes™

Brake Flasher

Front of Bike

Correct Placement of Magic Strobes™ is after Signal Stabilizer™ or Load EQ

Incorrect installation - Wrong Location

Tail Light

Signal Stabilizer™

or load Equalizer

Magic Strobes™

Brake Flasher

Run-Brake-Turn

Module

Magic Strobes™

Brake Flasher

Run-Brake-Turn

Module Tail Light

Magic Strobes™ Installed Before Run-Brake-Turn Module will strobe Tail and Turn

Magic Strobes™ Installed After Run-Brake-Turn Module will strobe Just Tail Light

Turn Signal

Front of Bike

Inhaltsverzeichnis

Andere Custom Dynamics Motorradzubehör Handbücher

Custom Dynamics

Custom Dynamics Smart Triple Play GEN-SMART-TPU-SS8 Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC STROBES Bedienungsanleitung

Custom Dynamics

Custom Dynamics Street Magic M109 Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruBEAM CDTB-45-AW-3B Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM PB-SCOUT-RR-BR Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-LR-04-R Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-RG-V-AW2-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM Dynamic Strips Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC-STROBES-SS6 Bedienungsanleitung

Custom Dynamics

Custom Dynamics Dynamic Strips CD-DS-ST-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-FORK-BCM-AB Bedienungsanleitung

Custom Dynamics

Custom Dynamics PROBEAM PB-SS-KIT2 Bedienungsanleitung

Custom Dynamics

Custom Dynamics MagicFLEX2 Indian LED War Bonnet Light Kit Service-Handbuch

Custom Dynamics

Custom Dynamics Street Magic Amber Brightsides Konfigurationshandbuch

Custom Dynamics

Custom Dynamics Road Glide CD-RG-TS-15-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics Street Magic RT Scuff Guard Konfigurationshandbuch

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Bedienungsanleitung

Custom Dynamics

Custom Dynamics Magic Strobes Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Bedienungsanleitung

Custom Dynamics

Custom Dynamics GEN-SMART-TPU -IND Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung