Custom Dynamics ProBEAM PB-BCM-KIT1 Bedienungsanleitung

We thank you for purchasing the Custom Dynamics® ProBEAM® BCM COMPLIANT TURN SIGNAL CONVERSION KIT (1157 REAR,

1157 FRONT) LED turn signals! Our LEDs oer maintenance free service and higher visibility. Our ProBEAM® product line ulizes

the latest technology and automove grade components to ensure the highest level of reliable service. Custom Dynamics®

oers one of the best warranty programs and customer support in the industry. If you have any quesons during the installaon

of this product please call us at 1(800) 382-1388.

P/N: PB-BCM-KIT1

Package Contents:

- Front 1157 LED Turn Signals: Choice of Amber/

White w/ Smoke lens or Amber w/ Amber

Lens (1pr)

- Rear 1157 LED Turn Signals: Choice of Red Ring or

Solid Red w/ Red Lens (1pr)

US Patent 830597, 830595, 830596, 851817, 851327

Chinese Patent ZL-201830045649.4, ZL-201830409102.8, ZL-

201830409095.1, Other Patent Pending

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

Note:

• Use care in removing the OEM lens and bulbs from

the housing, so as not to scratch or mar the chrome

housing. Custom Dynamics® is not liable for damage

to chrome housing during installaon.

• Dielectric grease does not need to be used with this

LED product, it can actually prevent them from work-

ing. Remove any excess grease from your turn signal

sockets before inserng.

***IMPORTANT***

This LED product is BCM compliant. However, you must

run the 4 way hazard ashers for 3 minutes with ignion

switch in the “OFF” posion to allow the BCM to sync the

new LED turn signals aer they are installed.

ATTENTION

Please read all Informaon below before Installaon

Fitment: 2014-2022 Harley-Davidson® Street Glide (FLHX),

Street Glide Special (FLHXS), Road Glide (FLTRX), Road Glide

Special (FLTRXS), Road King Special (FLHRXS), 2018-2022 Soail

Street Bob (FXBB/FXBBS), Fat Boy (FLFB/FLFBS), Fat Bob (FXFB/

FXFBS), Soail Standard (FXST), Slim (FLSL) and Breakout (FXSB/

FXSR) 2011-2017 Blackline (FXS), Slim (FLS), Slim S (FLSS),

Breakout (FXSB), Street Bob (FXDB), 2012-2017 Dyna Wide Glide

(FXDWG), Low Rider S (FXDLS), 2014-2022 XL883N, XL1200X,

XL1200V, XL1200CX, XL1200NS, 2011-2012 Soail Converble

CVO (FLSTSE2), 2014-2015 Soail Deluxe CVO (FLSTNSE), and

2014 Soail Breakout CVO (FXSBES).

Installation:

1. Remove the existing lens from turn signal housing. Use care in re-

moving the OEM lens and bulbs from the housing, so as not to

scratch or mar the chrome housing.

2. Remove existing bulb from turn signal housing.

3. Remove any corrosion or dielectric grease from the socket to insure

the socket contacts are clean.

4. Using a small flat blade screwdriver, go around the perimeter of the

reflector and slightly push the black gasket into the housing to allow

proper clearance of the new LED turn signal. (see Figure 1)

5. Confirm the proper orientation of the socket base and insert the base

into the socket. If it seems hard to twist the base in the socket or

hard to remove, it is probably orientated the wrong way.

6. Twist the LED turn signal a few rotations to coil wire from the turn

signal to the socket base. Insert LED turn signal into housing and

install new lens.

7. Confirm lens is installed correctly to prevent excess moisture or water

from entering the turn signal housing (see back page).

8. Check operation of turn signal in all modes.

Cauon: If there is a gap between the lens and the hous-

ing, water will leak into the unit and cause damage, be

sure the lens is fully seated all the way around the pe-

rimeter.

Figure 1

02-2022

PREVENTING WATER DAMAGE

SEE BACK OF PAGE

Custom Dynamics® ProBEAM® LED Turn Signals are coated with a thick layer of conformal coating which protects

the circuit board from a normal amount of moisture or water damage. Follow the steps below to ensure your new

ProBEAM® LED turn signal is installed properly to prevent excess moisture or water from entering the turn signal

housing.

1. ProBEAM® turn signals are installed with lenses provided by Custom Dynamics® included in original packag-

ing.

2. The lens is fully seated against the turn signal housing when installed; there are no gaps between the turn sig-

nal housing and the lens all the way around the perimeter.

3. The notch built into the lens is oriented towards the bottom of the turn signal housing. (See image 2 & 3 below)

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

• If there is a gap between the lens and the housing, water will leak into the unit and cause damage, be sure the

lens is fully seated all the way around the perimeter.

• If the lens will not fully seat on the housing, it may be necessary to trim any excess gasket with a small at blade

screw driver. Refer to image 4 below.

• Do not use the lens if any of the tabs are broken, doing so may cause water to enter the housing.

• Do not install the lens without the ProBEAM lens gasket in place, do-

ing so will cause water to leak into the housing.

PREVENTING WATER DAMAGE

Caution

Custom Dynamics® is not liable for damage to product as a result of incorrect installation.

Andere Custom Dynamics Motorradzubehör Handbücher

Custom Dynamics

Custom Dynamics PROBEAM PB-SS-KIT2 Bedienungsanleitung

Custom Dynamics

Custom Dynamics GEN-SMART-TPU -IND Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-LR-04-R Bedienungsanleitung

Custom Dynamics

Custom Dynamics Smart Triple Play GEN-SMART-TPU-SS8 Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC STROBES Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-RG-V-AW2-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC-STROBES-SS6 Bedienungsanleitung

Custom Dynamics

Custom Dynamics Magic Strobes Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM Dynamic Strips Bedienungsanleitung

Custom Dynamics

Custom Dynamics ProBEAM PB-SCOUT-RR-BR Bedienungsanleitung

Custom Dynamics

Custom Dynamics Dynamic Strips CD-DS-ST-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics CD-FORK-BCM-AB Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruBEAM CDTB-45-AW-3B Bedienungsanleitung

Custom Dynamics

Custom Dynamics Road Glide CD-RG-TS-15-B Bedienungsanleitung

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Bedienungsanleitung

Custom Dynamics

Custom Dynamics Street Magic RT Scuff Guard Konfigurationshandbuch

Custom Dynamics

Custom Dynamics MagicFLEX2 Indian LED War Bonnet Light Kit Service-Handbuch

Custom Dynamics

Custom Dynamics Street Magic M109 Bedienungsanleitung

Custom Dynamics

Custom Dynamics Street Magic Amber Brightsides Konfigurationshandbuch

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung

Cyclevision

Cyclevision EDGE CVHC-01-01 Bedienungsanleitung