CyberData 10878 Bedienungsanleitung
The IP Endpoint Company
Installation Quick Reference
PoE VoIP Paging Server
Sip Compliant
010878
Quick Reference 930131C © 2011 CyberData Corporation ALL RIGHTS RESERVED© 2011 CyberData Corporation ALL RIGHTS RESERVED 930131C Quick Reference
Mounting
Contacting CyberData
Hole size for Anchor installation: 3/16" (0.1875")
Screws: #6 x 1-1/2" Screw
You have the option to use the following mounting template to mark, and then drill two 3/16" (0.1875”) holes for the
mounting anchors.
To install and mount the Paging Server:
1. Install the mounting anchors in the holes, and position the Paging Server mounting holes over the anchors.
2. Use the two #6 sheet metal screws to secure the Paging Server onto the mounting surface.
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Web: http://www.cyberdata.net/support/contactsupportvoip.html
RMA Dept: (831) 373-2601 ext. 136
Email: RMA@CyberData.net
RMA Status: http://www.cyberdata.net/support/rmastatus.html
Warranty and RMA information is available at the following website:
http://www.cyberdata.net/support/warranty/index.html
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net
The VoIP Paging Server enables access to existing paging speakers through a VoIP phone system. This interface uses a
standard paging amplifier, and supports paging to multiple zones from a VoIP phone.
Getting Started
●Be sure that you have received all the parts described in the Parts List section.
●Download the VoIP Paging Server Operations Guide at:
http://www.cyberdata.net/products/voip/digitalanalog/pagingserver/docs.html
Parts List
Product Specifications
Regulatory Compliance FCC Class A, UL 60950, CE
Power Requirement PoE or +48VDC
LAN Speed 10/100 Mbps
Protocol SiP compliant
Part Number 010878
Dimensions 6.11”L x 4.05”W x 1.15” H
Weight 1.2 lbs.
(2) #6 Mounting Anchors (2) #6 x 1 1/2" Screws
(1) Mounting Template (see the last page)
(1) Mounting Kit
(1) VoIP Paging Server
© 2011 CyberData Corporation ALL RIGHTS RESERVED 930131C Quick Reference Quick Reference 930131C © 2011 CyberData Corporation ALL RIGHTS RESERVED
Verifying Operations and Settings
To restore these parameters to the factory default
settings:
1. Press and hold the RTFM switch for at least
20 seconds.
2. Release the switch. The Status and the
Paging LEDs will go off. The Link and
Activity LEDs will come on for one second
and go off to indicate that the reset process is
starting.
3. During the reset process, the Link LED will
come on and the Activity LED will blink.
After five seconds, the Status and Paging
LEDs come back on.
4. The Paging Server settings are restored to the
factory defaults.
●Green Link light indicates network connectivity
●Orange Link light indicates 100 Mbps baud rate
●Yell ow Link light indicates 10 Mbps baud rate
●Blinking yellow Activity light indicates network
activity
●Blinking pale blue Status light indicates the unit
is running
●Dark blue Paging light indicates the unit is
paging
Front View with LEDs
Back View with RTFM Switch
Typical Paging System Setup Using the Paging Server
Setting Up the PoE VoIP Paging Server
VoIP Phone
SIP Server
CyberData
VoIP Speakers
PoE VoIP Paging Server
134526
Generic PoE Switch
48V DC
48V DC
Non PoE (with 48 VDC power supply)
Chassis Ground
Chassis Ground
PoE
To set up the Paging Server, connect the device to
your network:
Poe
●For PoE, plug one end of an 802.3af Ethernet
cable into the Paging Server Ethernet port. Plug
the other end of the Ethernet cable into your
network. See the figure on the left.
Non-Poe
●For Non-PoE, connect the Paging Server to a
48VDC power supply. See the figure on the
left.
Chassis Ground
●If required, connect the earth grounding wire
to the Chassis Ground. See the figure on the
left.
Andere CyberData Server Handbücher
CyberData
CyberData VoIP V3 Paging Server Gebrauchsanweisung
CyberData
CyberData 010878 Bedienungsanleitung
CyberData
CyberData 11146 Bedienungsanleitung
CyberData
CyberData SIP PAGING ADAPTER Gebrauchsanweisung
CyberData
CyberData 11146 Handbuch
CyberData
CyberData V3 Keypad Bedienungsanleitung
CyberData
CyberData 11146 Handbuch
CyberData
CyberData 11146 Bedienungsanleitung
CyberData
CyberData 11146 Bedienungsanleitung
CyberData
CyberData 11146 Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung