CyberData SIP PAGING ADAPTER Gebrauchsanweisung

+-+

The IP Endpoint Company

930996B

Pyle Home PCM30A Amplifier to SIP Paging Server Connections

Pyle Home PCM30A Amplifier

Notes

1. Power off the amplifier and reduce the volume by turning the Paging Output Level counter-

clockwise before connecting the CyberData device and powering the amp back on.

2. Ensure that the amplifier is powered off prior to connecting the CyberData device and turn

the dial for Paging Level Output fully counter-clockwise.

3. Connect the CyberData device, and then power the amplifier back on.

4. Slowly raise the Paging Level Output (clockwise) to adjust the volume during testing.

2 conductor, shielded speaker wire is recommended.

SIP Paging Server Connections

Keep as short as possible

Shield/Drain Wire Shield/Drain Wire

Balanced

GENERAL ALERT

Caution

Equipment Hazard: All equipment should be powered down prior

to making wiring connections and changing switch positions.

Page Port Connections

Pin Description

1 Fault Sense Input (Common).

2 Fault Sense Input (Sense).

3 Positive 600-Ohm Audio Outputa

a.The 600-Ohm audio output of the page port is

also suited for interfaces with lower input

impedances.

4 Negative 600-Ohm Audio Outputa

5 Audio Ground Reference.

6 Relay Contact - Commonb

b.1 Amp at 30 VDC for continuous loads.

7 Relay Contact - Normally Openb

+-+

The IP Endpoint Company

930996B

Pyle Home PCM60A Amplifier to SIP Paging Server Connections

Pyle Home PCM60A Amplifier

Notes

CyberData SIP Paging Adapter's 600 Ohm Page Port output connects to the Balanced

TEL/PAGING input terminals on the Pyle Home PCM60A Amplifier.

2 conductor, shielded speaker wire is recommended.

SIP Paging Server Connections

Keep as short as possible

Shield/Drain Wire Shield/Drain Wire

Balanced

GENERAL ALERT

Caution

Equipment Hazard: All equipment should be powered down prior

to making wiring connections and changing switch positions.

Page Port Connections

Pin Description

1 Fault Sense Input (Common).

2 Fault Sense Input (Sense).

3 Positive 600-Ohm Audio Outputa

a.The 600-Ohm audio output of the page port is

also suited for interfaces with lower input

impedances.

4 Negative 600-Ohm Audio Outputa

5 Audio Ground Reference.

6 Relay Contact - Commonb

b.1 Amp at 30 VDC for continuous loads.

7 Relay Contact - Normally Openb

Andere Handbücher für SIP PAGING ADAPTER

Dieses Handbuch passt für folgende Modelle

Andere CyberData Server Handbücher

CyberData

CyberData SIP PAGING ADAPTER Kurzanleitung

CyberData

CyberData 11146 Bedienungsanleitung

CyberData

CyberData Quadro 2X Bedienungsanleitung

CyberData

CyberData V3 Keypad Bedienungsanleitung

CyberData

CyberData V3 Keypad Bedienungsanleitung

CyberData

CyberData 11146 Bedienungsanleitung

CyberData

CyberData 11146 Handbuch

CyberData

CyberData 10878 Bedienungsanleitung

CyberData

CyberData 11146 Handbuch

CyberData

CyberData 010878 Bedienungsanleitung

CyberData

CyberData VoIP V3 Paging Server Gebrauchsanweisung

CyberData

CyberData 11146 Bedienungsanleitung

CyberData

CyberData 11146 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung