CyberPower OR600ELCDRM1U Bedienungsanleitung

K01-0000232-00

OR600ELCDRM1U

User’s Manual

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions that should be followed during installation and

maintenance of the UPS and batteries. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit

breaker protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to

de-energize this equipment, turn off and unplug the UPS.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower

Systems does not sell products for life support or medical applications. DO NOT use in any

circumstance that would affect the operation or safety of any life support equipment, with any

medical applications, or patient care.

CAUTION! The battery can energize hazardous live parts inside even when the AC input

power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity

controlled indoor area, free of conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service

the battery. There are no user serviceable parts inside, except for the battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source

before servicing the battery or installing a computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not

use with or near aquariums. Condensation from the aquarium can come in contact with metal

electrical contacts and cause the machine to short out.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the following:

(1) PowerPanel® Business Edition software (CD) x1; (2) USB cable (A+B type) x1; (3) Telephone

communication cable x1; (4) RS232 (DB9) cable x1; (5) Power cord x4; (6) user manual x1; (7) UPS

unit x1.

OVERVIEW

The OR600ELCDRM1U provides automatic voltage regulation for inconsistent utility power. The

OR600ELCDRM1U features 1030 Joules of surge protection, and provides battery backup during

power outages. The OR600ELCDRM1U ensures consistent power to your computer system and its

included software will automatically save your open files and shutdown your computer

system during a utility power loss.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR

EQUIPMENT

1.Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and

peripheral equipment does not exceed 600VA.

2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does

not exceed the UPS unit's rated capacity (600VA/360W for OR600ELCDRM1U). If the rated unit

capacities are exceeded, an overload condition may occur and cause the UPS unit to shut down and

the circuit breaker to trip.

BASIC OPERATION

DESCRIPTION

1. LCD Module Display

High resolution and intelligent LCD display shows all the UPS information with icons and

messages. For more information please check the “Definitions for Illuminated LCD Indicators”

section.

2. Power On Indicator

It illuminates when the UPS outlets are providing power, free of surges and spikes.

3. Power Switch

Used as the master on/off switch for equipment connected to the battery power supplied outlets.

4. LCD Display Toggle/Selected Switch

The switch can be used to select the LCD display contents including Input Voltage, Output Voltage

and Estimated Run Time.

5. Battery and Surge Protected Outlets

The unit has four battery powered/surge protected outlets for connected equipment and ensures

temporary uninterrupted operation of your equipment during a power failure.

6. Full-Time Surge Protection Outlets

The unit has two always on surge suppression outlets.

7. Communication Protection Ports

Communication protection ports will protect any standard modem, fax, telephone line, broadband

network or Ethernet connection.

8. USB Port to PC

The USB port allow communication from the UPS to the computer. The UPS communicates its

status to the PowerPanel®Business Edition software when connected with a USB port.

9. Serial Port to PC

The port allows connection and communications from the DB-9 serial on the computer to the UPS

unit.

10. Circuit Breaker

Located on the side of the UPS, the circuit breaker serves to provide overload and fault protection.

11. AC Input

Connect the AC Power cord to a properly wired and grounded outlet.

12. Expansion Port

Allows users to add the optional SNMP card.

Hardware Installation Guide

1. Your new UPS may be used immediately upon receipt. However, recharging the battery for

at least 8 hours is recommended to ensure that the battery's maximum charge capacity

is achieved. Charge loss may occur during shipping and storage. To recharge the battery,

simply leave the unit plugged into an AC outlet. The unit will charge in both the on and off

position.

2. With the UPS unit off and unplugged, connect the computer, monitor, and any externally

powered data storage device (Zip drive, Jazz drive, Tape drive, etc. into the battery power

supplied outlets. DO NOT plug a laser printer, copier, space heater, vacuum, paper

shredder or other large electrical device into the UPS. The power demands of these

devices will overload and possibly damage the unit.

3. To protect a fax, telephone, modem line or network cable, connect a telephone cable or

network cable from the wall jack outlet to the IN jack of the UPS. Then connect a telephone

cable or network cable from the OUT jack on the UPS to the modem, computer, telephone,

fax machine, or network device.

4. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall

branch outlet is protected by a fuse or circuit breaker and does not service equipment with

large electrical demands (e.g. air conditioner, refrigerator, copier, etc. Avoid using

extension cords. If used, the extension cord must be grounded and rated for 15 amps.

5. Depress the power switch to turn the unit on. The power on indicator light will illuminate

and the unit will "beep".

6. If an overload is detected, an audible alarm will sound and the unit will emit one long beep.

To correct this, turn the UPS off and unplug at least one piece of equipment from the

battery power supplied outlets. Wait 10 seconds. Make sure the circuit breaker is

depressed and then turn the UPS on.

7. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.

8. To store your UPS for an extended period, cover it and store with the battery fully

charged. Recharge the battery every three months to ensure battery life.

CYBERPOWER GREENPOWER UPS TECHNOLOGY

CyberPower’s Green Commitment

CyberPower is dedicated to the development of green products, and has adopted

Green practices throughout its business, including: membership in Climate Savers

Computing Initiative (CSCI), accordance with the Restriction on Hazardous

Substances (RoHS), Waste Electrical and Electronic Equipment (WEEE) protocols,

as well as ISO 14001 and IECQ QC080000. CyberPower pledges to provide the

advanced energy solution for the environment and become a leading eco-friendly

organization in the UPS industry.

Reduce Energy Cost with GreenPower UPSTM Technology

CyberPower’s goal is not only to provide eco-friendly products but also to bring the best value for

consumers. The advanced energy-saving design improves the operating efficiency and eliminates

waste energy consumption.As a result, consumers will enjoy significant energy cost savings with the

adoption of GreenPower UPSTM technology.

BATTERY REPLACEMENT

CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the

battery. Service the battery under the supervision of personnel knowledgeable of

batteries and their precautions.

CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.

CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in

a fire, as they may explode. Follow all local ordinances regarding proper disposal of batteries.

CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to the skin

and eyes and may be toxic.

CAUTION! A battery can present a high risk of short circuit current and electrical shock. Take

the following precautions before replacing the battery:

1. Remove all watches, rings or other metal objects.

2. Only use tools with insulated handles.

3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.

4. Wear rubber gloves and boots.

5. Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source

of ground. CONTACT WITH A GROUNDED BATTERY CAN RESULT IN ELECTRICAL

SHOCK! The likelihood of such shock will be reduced if such grounds are removed during

installation and maintenance (applicable to a UPS and a remote battery supply not having a

grounded circuit)

BATTERY REPLACEMENT PROCEDURE:

1. Remove the right-side of the

faceplate.

2. Remove the three retaining screws

on the cable protection cover then

remove the cover faceplate.

3. Disconnect the black and red cables.

REMINDER: Batteries are consider HAZARDOUS WASTE and must be disposed of properly. Almost

any retailer that sells lead-acid batteries collects used batteries for recycling, as required by most state

laws.

DEFINITIONS FOR ILLUMINATED LCD INDICATORS

LCD Indication

Line Mode

Select SW

Press

UPS Status Display Capacity Display

Digital Value Display

Load

Cap. Battery

Cap. Input

Voltage

Output

Voltage

Run

Time

Load

Batt.

Initial

1st

2nd

3rd

4th

5th(Return)

Press

>3sec

(Sound Di

able)

V X V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

V X X X -- -- -- -- -- -- --

(Overload)

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

Battery Mode

Select SW

Press

UPS Status Display Capacity Display

Digital Value Display

Load

Cap. Battery

Cap. Input

Voltage

Output

Voltage

Run

Time

Load

Batt.

Initial

1st

2nd

3rd

4th

5th(Return)

4. Remove the retaining screw of the

cable connectors.

5. Replace the new battery pack. Assemble the

screws, cover, cable and front panel in the reverse

sequence of above steps. Recharge the unit for 4-8

hours to ensure the UPS performs expected runtime.

Press >3sec

(Sound Di

able)

X V V X -- -- -- -- -- -- --

Press >3sec

again

(Sound Enable)

X V X X -- -- -- -- -- -- --

(Overload)

“V” : Illuminated, “X” : Not Illuminated, “--“ : Either

TECHNICAL SPECIFICATIONS

Model OR600ELCDRM1U

Capacity (VA) 600VA/360W

Input

Frequency Range 47Hz-63Hz (Auto Sensing)

AVR Function Yes

Output

On Battery Output

Voltage 230Vac +/-10%

On Battery Output

Frequency 50/60Hz +/-1%

Overload Protection On Utility: Circuit Breaker, On Battery: Internal Current Limiting

Surge Protection

Lightning / Surge

Protection Yes

Network/ Phone/ Fax/

Modem Protection RJ11/RJ45 ( One In/ One Out )

Operating

Temperature +32°F to 104°F ( 0°C to 40°C )

Physical

Total # of UPS outlets

6 ( Backup x 4 )

Maximum

Dimensions(LxWxH) 1U Rack 430x235x44mm

Weight 8.1 kg

Battery

Sealed Maintenance

Free Lead Acid

Battery

6V / 9Ah x2

Typical Recharge

Time 8 hours

User Replaceable Yes

Status Indicators

Indicators Power On, Wiring Fault, LCD Display

Audible Alarms On Battery, Low Battery, Overload

Communication

PowerPanel

Business Edition

Software

Windows 7 / VISTA / XP / 2000, Server 2008 / 2003

Management

Self -Test Yes

Auto-Charger Yes

Auto-Restart Yes

USB interface Yes

Dry Contact Yes

SNMP/HTTP

Networking Option

TROUBLESHOOTING

Problem Possible Cause Solution

Full

time surge protection

outlets stop providing

power to equipment.

Circuit breaker button is

projecting from the side of

the unit.

Circuit breaker has

tripped due to an

overload.

Turn the UPS off and unplug at least one

piece of equipment. Wait 10 seconds, reset

the circuit breaker by depressing the

button, and then turn the UPS on.

The UPS does not perform

expected runtime.

Battery not fully

charged.

Recharge the battery by leaving the UPS

plugged in.

Battery is slightly worn

out.

Contact CyberPower Systems about

replacement batteries at

support@cpsww.eu

The UPS will not turn on.

The on/off switch is

designed to prevent

damage by rapidly

turning it off and on.

Turn the UPS off. Wait 10 seconds and

then turn the UPS on.

The battery is worn

out.

Contact CyberPower Systems about

replacement batteries at

support@cpsww.eu

Mechanical problem.

Contact CyberPower Systems at

support@cpsww.eu

PowerPanel® Business

Edition is inactive.

The serial/USB cable

is not connected.

Connect the

serial/

USB cable to the

UPS

unit and an open serial port on the back of

the computer. You must use the cable that

came with the unit.

The unit is not

providing

battery power.

Shutdown your computer and turn the

UPS off. Wait 10 seconds and turn the

UPS back on. This should res

et the unit.

Additional troubleshooting information can be found at www.cpsww.eu

For more information, visit www.cpsww.eu or contact

Cyber Power Systems, Inc.

E-MAIL: sales@cpsww.eu

OR600ELCDRM1U

Manuel d’utilisation

AVERTISSEMENTS DE SECURITE IMPORTANTS

Ce manuel contient d’importantes instructions de sécurité. Veuillez lire et suivre scrupuleusement

toutes les instructions pendant l’installation et l'utilisation de l’appareil. Lisez ce manuel attentivement

avant de déballer, d’installer ou d'utiliser votre UPS (système d’alimentation sans coupure).

ATTENTION ! Pour éviter les risques d’incendie ou d’électrocution, installez l’UPS dans une pièce dont

la température et l’humidité sont contrôlées et qui est dépourvue de contaminants conducteurs

(Reportez-vous aux spécifications pour connaître les gammes de température et d’humidité

acceptables).

ATTENTION ! Pour réduire les risques d’électrocution, ne retirez pas le couvercle. L’appareil ne

comporte aucune pièce réparable par l’utilisateur.

ATTENTION ! Des pièces sous tension dangereuses à l’intérieur de l’appareil peuvent être alimentées

par la batterie même quand l’entrée de courant CA est débranchée.

ATTENTION ! L’UPS doit être relié à une prise de courant CA munie d’un fusible et d'un disjoncteur. Ne

le branchez pas dans une prise qui n’est pas mise à la terre. Si vous devez cesser l’alimentation de cet

appareil, éteignez-le puis débranchez-le.

ATTENTION ! Pour éviter les électrocutions, éteignez l’UPS et débranchez-le de la source de courant

CA avant d’installer un composant d’ordinateur.

NE PAS UTILISER POUR DES EQUIPEMENTS MEDICAUX ! Les systèmes CyberPower ne sont pas

destinés aux applications médicales. Ne pas utiliser dans des situations qui affecteraient le

fonctionnement et la sécurité d’équipements et d’applications médicales ou la survie du patient.

NE PAS UTILISER AVEC OU A PROXIMITE DES AQUARIUMS! Pour réduire les risques d’incendie

ou d’électrocution, n’utilisez pas l’UPS avec ou à proximité d’un aquarium. La condensation de

l’aquarium peut court-circuiter l’appareil.

INSTALLATION DE VOTRE SYSTEME UPS

DEBALLAGE

Inspectez l’UPS tout en consultant le bordereau d’expédition afin de vous assurer qu’aucune des

pièces suivantes ne manque:

(1) CD du logiciel PowerPanel® Business Edition x 1; (2) Câble USB x 1; (3) Câble pour téléphone x 1;

(4) Câble RS232 (DB9) x1; (5) Câbles d'utilisation x 4; (6) Mode d’emploi x 1; (7) Unité UPS x 1.

EXPOSE GENERAL

Le OR600ELCDRM1U fournit une régulation automatique de la tension pour le courant électrique

inconsistant. Le OR600ELCDRM1U intègre une protection parafoudre de 1030 Joules contre la

surtension, et alimente la batterie pendant les pannes de courant. Le OR600ELCDRM1U garantit

l’alimentation consistante de votre ordinateur et son logiciel inclus sauvegardera automatiquement vos

fichiers ouverts et éteindra le système de votre ordinateur pendant les pannes de courant.

COMMENT DETERMINER LES CONDITIONS ELECTRIQUES DE VOTRE UPS

1. Assurez-vous que le besoin total en Volt-ampère (VA) de votre ordinateur, du moniteur et

des équipements périphériques ne dépasse pas 600VA.

2. S'assurer que les équipements branchés sur les prises power-supplied/surge batterie ne dépasse

pas la capacité nominale de l'unité UPS (600VA/360W pour OR600ELCDRM1U). Si les capacités des

unités sont dépassées, une condition de surcharge peut survenir et causer l’arrêt de l’UPS et la

disjonction du disjoncteur.

Inhaltsverzeichnis

Sprachen:

Andere CyberPower UPS Handbücher

CyberPower

CyberPower OfficePower 1250AVR Bedienungsanleitung

CyberPower

CyberPower OL1000RTXL2U Bedienungsanleitung

CyberPower

CyberPower PR1000ELCDRTXL2U Bedienungsanleitung

CyberPower

CyberPower OR700LCDRM1U Bedienungsanleitung

CyberPower

CyberPower OL6000RT3UTF Bedienungsanleitung

CyberPower

CyberPower OL1000RTXL2U Bedienungsanleitung

CyberPower

CyberPower CP1200EIPFCLCD Bedienungsanleitung

CyberPower

CyberPower CyberShield CS75A12V3 Bedienungsanleitung

CyberPower

CyberPower 3000 VA Bedienungsanleitung

CyberPower

CyberPower 649532822003 Bedienungsanleitung

CyberPower

CyberPower 649532015597 Bedienungsanleitung

CyberPower

CyberPower PR1500 Bedienungsanleitung

CyberPower

CyberPower UP425 Bedienungsanleitung

CyberPower

CyberPower PR750ELCD Bedienungsanleitung

CyberPower

CyberPower Paragon OL1000RMXL2U Bedienungsanleitung

CyberPower

CyberPower BU600E-AS Bedienungsanleitung

CyberPower

CyberPower BR1000ELCD Bedienungsanleitung

CyberPower

CyberPower Value 400E Bedienungsanleitung

CyberPower

CyberPower CyberShield BAS34U24V Bedienungsanleitung

CyberPower

CyberPower CST625G Bedienungsanleitung

CyberPower

CyberPower Utility Tower Plus Series UPS UP425UIT Bedienungsanleitung

CyberPower

CyberPower OR600ERM1U Bedienungsanleitung

CyberPower

CyberPower UP825 Bedienungsanleitung

CyberPower

CyberPower CPS1200EILCD Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung

BPC

BPC 1.5K SMART Bedienungsanleitung

IBM

IBM 5595-1AX Bedienungsanleitung