CyberView RK-1 Series Bedienungsanleitung

User Manual

Rackmount Keyboard Drawer

Models

RK-1 Series

Models

RK-2 Series

- Short depth version

- Without KVM options

- With KVM options

blank page

Chapter 1 Getting Started

1.1 Package Contents...............................................................1

1.2 Before Installation...............................................................2

1.3 Unpacking...........................................................................2

1.4 OptionalAccessories...........................................................2

1.5 Peripheral Products.............................................................3

1.6 Structure Diagram...............................................................3

1.7 Installation..........................................................................4

1.8 Connect to Server via USB Interface..................................5

1.9 Connect to KVM via USB Interface.....................................5

1.10 Connect to Server via PS/2 Interface..................................6

1.11 Connect to KVM via PS/2 Interface.....................................6

Chapter 2 Keyboard and Mouse................................................7

Chapter 3 Optional Speciﬁcation

3.1 KVM Options for RK-1 Series.............................................8

3.2 Environmental....................................................................8

Chapter 4 Dimensions........................................................................8

Contents

Keyboard drawer x 1 pc

Fasteners for rear L-bracket x 4 pcs

330mm rear mounting L-bracket x 1 pair

* RK-1 series mounting depth-adjustable from 210 to 800mm

* RK-2 series maximum mounting depth is 645mm

Combo keyboard cable x 1 pc

User manual x 1 pc

User

Manual

1.1 Package Contents Chapter 1

P. 1

1. Extended rear mounting L-bracket

1.1 430mm (16.9") extended rear L-bracket for :

RK-1 series up to 900mm

RK-2 series up to 745mm

*Extended rear L-bracket in tailor-made length on request

1.4 Optional Accessories

■It is very important to locate the Rackmount Keyboard Drawer in a suitable environment.

■The surface for placing and ﬁxing the Rackmount Keyboard Drawer should be stable and level or mounted into a

suitable cabinet.

■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,

water, moisture and vibration.

■Convenience for connecting the Rackmount Keyboard Drawer to the related facilities should be well considers too.

The Rackmount Keyboard Drawer comes with the standard parts shown on the package contents. Check and make sure

they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.

1.3 Unpacking

1.2 Before Installation Chapter 1

P. 2

1.5 Peripheral Products Chapter 1

1.6 Structure Diagram

Adjustable rear mounting L-bracket

Membrane switch (for RK-1 with KVM option)

Keyboard interchangeable module kit

Mouse interchangeable module kit

Carry handle to release the 2-pt lock

P. 3

Item Model No. Description

Matrix Cat6 KVM

MU-1602 / MU-1603 / MU-1604

MU-IP1613 / MU-IP1614 / MU-IP1624

MU-3202 / MU-3203 / MU-3204

MU-IP3213 / MU-IP3214 / MU-IP3224

Matrix Cat6 16 port KVM

Matrix IP Cat6 16 port KVM

Matrix Cat6 32 port KVM

Matrix IP Cat6 32 port KVM

Matrix DB-15 KVM

M-802 / M-803 / M-804

M-IP813 / M-IP814 / M-IP824

M-1602 / M-1603 / M-1604

M-IP1613 / M-IP1614 / M-IP1624

Matrix DB-15 8 port KVM

Matrix IP DB-15 8 port KVM

Matrix DB-15 16 port KVM

Matrix IP DB-15 16 port KVM

Combo Cat6 KVM

U-801 / U-802 / U-IP802

U-1601 / U-1602 / U-IP1602

U-3201 / U-3202 / U-IP3202

Combo Cat6 8 port KVM

Combo Cat6 16 port KVM

Combo Cat6 32 port KVM

Combo DB-15 KVM CV-S801 / CV-802 / IP-802

CV-S1601 / CV-1602 / IP-1602

Combo DB-15 8 port KVM

Combo DB-15 16 port KVM

PS/2 DB-15 KVM CV-401 / CV-801 / CV-1601 4 / 8 / 16 port PS/2 DB-15 KVM

Rackmount LCD Drawer RP-115 / 117 / 119

RP-W119

1U 15" / 17" / 19" LCD drawer

1U wide screen 19” LCD drawer

Rackmount LCD Display RP-717 / 819 / 920

RP-W719 / 822

7U 17" / 8U 19" / 9U 20”LCD display

7U 19” / 8U 22” wide screen LCD display

1.7 Installation Chapter 1

■Install each rear L-bracket using two fasteners

shown in Figure 1.

■Leaving the fasteners slightly loose

Figure 1. Installing the rear L-bracket to the keyboard drawer.

■Measure the front and rear mounting depth of

the rack.

■Align each rear L-bracket to a suitable length

and tighten the fasteners shown in Figure 2.

Figure 2. Aligning the rear L-brackets to a suitable length for the rack.

■Fixed the keyboard drawer into the rack.

* Hardware (screws and cage nuts) for

ﬁxing the mounting bracket to the rack is

not provided.

Figure 3. Fixing the keyboard drawer into the rack.

P. 4

1.8 Connect to Server via USB Interface Chapter 1

P. 5

Remarks :

■The above connection is only for the keyboard without KVM switch built-in.

■For the keyboard drawer with KVM switch built-in, please refer to www.austin-hughes.com.

1.9 Connect to KVM via USB Interface

Caution : The keyboard drawer is hot-pluggable, but components of connected devices,

such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging

cables while servers and KVM are powered on may cause irreversible damage to the serv-

ers, KVM and keyboard drawer. Before attempting to connect anything to the keyboard

drawer, we suggest turning off the power to all devices before connecting them. Apply

power to connected devices again only after the keyboard is receiving power. The com-

pany is not responsible for damage caused in this way.

Figure 4. Example of connecting EKC-3 keyboard cable to server via USB interface

Figure 5. Example of connecting EKC-3 keyboard cable to KVM via USB interface

1.10 Connect to Server via PS/2 Interface Chapter 1

1.11 Connect to KVM via PS/2 Interface

P. 6