CyClone LFP300-48 Bedienungsanleitung

Please comply with all warnings and operating

instructions in this manual strictly. Save this manual

properly and read carefully the following instructions

before installing the unit. Do not operate this unit before

reading through all safety information and operating

instructions carefully.

1.SAFETY PRECAUTION .................................................................................................................................................... 3

1.1 WHEN USING BATTERY ................................................................................................................................................... 3

1.2 WHILE CHARGING ...........................................................................................................................................................4

1.3 WHEN DISCHARGING THE BATTERY ............................................................................................................................... 4

2.PARAMETERS OF BATTERY ..........................................................................................................................................5

2.1 BASIC BLOCK DIAGRAM .................................................................................................................................................5

2.2 BATTERY SPECIFICATIONS ............................................................................................................................................... 6

2.3 PANEL VIEW .................................................................................................................................................................... 7

2.4 LED INDICATORS ............................................................................................................................................................ 8

2.5 BUZZER OPERATION (OPTIONAL) ....................................................................................................................................9

2.6 DISPLAY FUNCTION INSTRUCTION ................................................................................................................................ 10

2.6.1 Display rendering ..............................................................................................................................................................10

2.6.2 Functional Specifications ..................................................................................................................................................10

2.7 CONNECTORS ................................................................................................................................................................ 13

2.8 WAKE UP BUTTON .........................................................................................................................................................13

3. SAFE HANDLING GUIDE ..............................................................................................................................................13

3.1 SYSTEM DIAGRAM ........................................................................................................................................................ 13

3.2 TOOLS ........................................................................................................................................................................... 14

3.3 SAFETY GEAR ............................................................................................................................................................... 14

3.4 INSTALLATION ............................................................................................................................................................... 14

3.4.1 Inventory of items .............................................................................................................................................................14

3.4.2 Installation Location ......................................................................................................................................................... 15

3.4.3 Wall-mounted ....................................................................................................................................................................15

4. OPERATING INTRUCTIONS ........................................................................................................................................16

4.1 SOFTWARE INSTALLATION ............................................................................................................................................. 16

4.2 PRE-OPERATION STEP .................................................................................................................................................... 16

4.3 COMMUNICATION FUNCTION ........................................................................................................................................ 17

4.3.1 Communication port definition .........................................................................................................................................17

4.3.2 Battery communicate with PC/Software ..........................................................................................................................18

4.3.3 Batteries communicated with inverter .............................................................................................................................. 19

5. TROUBLESHOOTING ....................................................................................................................................................21

6. STORAGE AND MAINTENANCE ................................................................................................................................ 22

6.1. STORAGE ...................................................................................................................................................................... 22

6.2. MAINTENANCE .............................................................................................................................................................22

7 PRODUCT RESPONSIBILITIES AND CONSULTING ............................................................................................. 23

1.Safety Precaution

1.1 When Using battery

Danger of High Voltage：

The high voltage power supply offer the equipment power, wet object contact high voltage power

supply directly or indirectly , can cause fatal danger.

Static‐free：

Static electricity would damage veneer on the electrostatic sensitive components, before touching the

plug‐in, circuit board or chips, be sure to use correct electrostatic prevention measures.

Dc short circuit dangerous：

Power system provides dc regulated power supply. Dc short circuit could cause fatal damage to the e

quipment.

Using a special tool :

Working in high voltage and ac power, be sure to use a special tool instead of individual tools.

Disconnect the power supply in operation:

When operate the power supply, you must first cut off power supply, power operation is prohibited.

1.2 While Charging

CAUTION

The temperature range over which the battery can be charged is 0°C to 45°C. Charging the battery

at temperatures outside of this range may cause the battery to become hot or to break. Charging the

battery outside of this temperature range may also harm the performance of the battery or reduce

the battery’s life expectancy.

1.3 When Discharging the Battery

DANGER

Do not discharge the battery using any device except for the specified device. When the battery is

used in devices aside from the specified device it may damage the performance of the battery or

reduce its life expectancy, and if the device causes an abnormal current to flow, it may cause the

battery to become hot and cause serious injury.

CAUTION

The temperature range over which the battery can be discharged is -20°C to 60°C. Use of the battery

outside of this temperature range may damage the performance of the battery or may reduce its life

expectancy.

2.Parameters of Battery

2.1 Basic Block Diagram

• There are Battery cells and BMS board inside, before connecting the terminal, please read the

diagram, and make sure the output is no short or other abnormal connection.

Fig1 Battery Block Diagram

2.2 Battery Specifications

Battery Specifications

Model NO. LFP300-48

Nominal Parameters

Voltage 48V

Capacity 300Ah

Energy 14.4KWh

Dimensions(L*W*H) 600*1100*230mm

Weight 158Kg

Basic Parameters

Design life time(25℃) 20 years

Life cycles(80% DOD,25℃） 8000 Cycles

Storage tiome/temperature 5 moths @ 25℃;3 moths @ 35℃;1 moths @ 45℃

Operation temperature -20℃ to 60℃ @ 60±25 Relative Humidity

Storage temperature 0℃ to 45℃ @ 60±25 Relative Humidity

Lithium battery standard IEC62619,UN38.3,ROHS,CE-EMC,UL 1642,MSDS

Enclosure protection rating IP30

Electrical Parameters

Operation voltage 48Vdc

Max. charging voltage 54Vdc

Cut-off discharge voltage 40.5Vdc

Max. charge and discharging

current 150A

Battery Specifications

Model NO. LFP300-51.2

Nominal Parameters

Voltage 51.2V

Capacity 300Ah

Energy 15.36KWh

Dimensions(L*W*H) 600*1100*230mm

Weight 165Kg

Basic Parameters

Design life time(25℃) 20 years

Life cycles(80% DOD,25℃） 8000 Cycles

Storage tiome/temperature 5 moths @ 25℃;3 moths @ 35℃;1 moths @ 45℃

Operation temperature -20℃ to 60℃ @ 60±25 Relative Humidity

Storage temperature 0℃ to 45℃ @ 60±25 Relative Humidity

Lithium battery standard IEC62619,UN38.3,ROHS,CE-EMC,UL 1642,MSDS

Enclosure protection rating IP30

Electrical Parameters

Operation voltage 51.2Vdc

Max. charging voltage 57.6Vdc

Cut-off discharge voltage 43.2Vdc

Max. charge and discharging

current 150A

2.3 Panel View

No. Description Functional Description

1 Battery + Positive terminal

2 Battery - Negative terminal

3 Metal Button Battery ON/OFF Button

4 Wheel /

5 MCB Output ON/OFF

6 ON/OFF LED Battery ON/OFF Indicator LED

7 RST Key Reset Button

8 Display Connection Address ADS Dialer

9 DCT 2 Road Dry Contacts

10 RS485 Communication Port RS485 Communication Interface

11 CAN Communication Port CAN Communication Interface

12 RS232 Communication Port RS232 Communication Interface

13 RS485 Communication Port 2 Road RS485 Ports For Battery

Communication In Parallel

14 Capacity LED Electricity Volume Indicator

15 ALM LED Alarm Indicator Light Blinking

16 Run LED Run Indicator Light

17 LCD Key LCD Operated Button

18 LCD Display Screen

2.4 LED Indicators

LED Indicators:

There are 6 LEDs on upper panel to show the battery working status:

Pack

Status

Normal/Alar

m/Protection

RUN ALM SOC Indication LED

Remark

● ● ● ● ● ●

Power

Off Sleep OFF OFF OFF OFF OFF OFF All OFF

Standby

Normal Flash 1 OFF

Indication by SOC

Standby

Alarm Flash 1 Flash 3 Battery undervoltage

Charge

Normal ON OFF

Indication by SOC

Alarm ON Flash 3 -

Over Charge

Protection ON OFF -ALM LED is off when

overcharge protection

Temperatuer/ OFF ON Stop charge

Overcurrent

protection

Discharg

Normal Flash 3 OFF

Indication by SOC

Alarm Flash 3 Flash 3 -

Over Discharge

Protection OFF OFF Stop discharge

Temperature/

Over current

/Short circuit

protection

OFF ON Stop discharge

Fault OFF ON OFF OFF OFF OFF Stop charge & discharge

NOTE: LED function can be set by monitor software, the default is on.

Flash ON OFF

Flash1 0.25Sec 3.75Sec

Flash2 0.5Sec 0.5Sec

Flash3 0.5Sec 1.5Sec

2.5 Buzzer Operation (Optional)

Model Description and Status

Fault Buzzing 0.25S per 1Sec

Protection Buzzing 0.25S per 2Sec (expect for over-charge protection)

Alarm Buzzing 0.25S per 3Sec (expect for over-charge alarm)

NOTE: Buzzer function can be set by monitor software, the default is off.

NOted: Circuit breaker of battery circuit is set to OFF, connect it to switch power supply,

and output voltage of switch power supply is set to （48V）52.5-54V/(51.2V)56-57.6V,

current set to 0.2C; after all settings done, switch the circuit breaker ON

Inhaltsverzeichnis

Andere CyClone Batteriepack Handbücher

CyClone

CyClone LES100-48 Bedienungsanleitung

Beliebte Batteriepack Handbücher anderer Marken

Acumentrics

Acumentrics PACK-POWER SYSTEM Bedienungsanleitung

ACDC Dynamics

ACDC Dynamics SPF12-50 Bedienungsanleitung

Aegis

Aegis ABL-72020P Bedienungsanleitung

Dyness

Dyness TowerESS Bedienungsanleitung

Growatt

Growatt APX 5.0P-S0-US Bedienungsanleitung

EGO

EGO BAX1300 Bedienungsanleitung

CyberPower

CyberPower BCA Series Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Dometic

Dometic PLB40 Bedienungsanleitung

V-TAC

V-TAC VT-48280-W2 Bedienungsanleitung

Valence

Valence RT Bedienungsanleitung

Nikon

Nikon MB-D14 Bedienungsanleitung

IOGear

IOGear GBP24V Series Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung

Clas Ohlson

Clas Ohlson PW-290A Bedienungsanleitung

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Bedienungsanleitung

Samsung

Samsung EB-U3300 Bedienungsanleitung

ECTIVE

ECTIVE LC Series Bedienungsanleitung