CYP CLUX-11HB Bedienungsanleitung
CLUX-11HB
L/R & Optical Audio to HDMI Bridge
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person to walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 25/07/13 Preliminary Release
VS1 12/06/13 Updated format/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel.........................................2
6.2 Rear Panel .........................................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 6
1
1. INTRODUCTION
The L/R and Optical Audio to HDMI Bridge is designed to convert
analog or digital audio signals into an HDMI output, allowing easy
integration of audio only sources with HDMI distribution systems. This
device adds a 'blue-screen' video feed with a simple on-screen
display (OSD) that shows the current audio input so that any HDMI
AV Receiver, display or matrix will accept the audio signal. It supports
digital audio sampling rates up to 192 kHz and stereo analog audio
sampling rates up to 48 kHz.
2. APPLICATIONS
• Analog or Optical Digital audio conversion to HDMI output
• Integrate an analog audio only source into a HDMI matrix or HDTV
• Audio only source to HDMI integration
3. PACKAGE CONTENTS
• 1× L/R & Optical Audio to HDMI Bridge
• 1× 5V DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Audio source equipment with Analog or Optical digital audio output
such as a digital radio or audio streaming device and connect to
HDMI devices such as TV/Display or HDMI matrix.
5. FEATURES
• Supports Analog to Digital audio Conversion (ADC)
• Supports Optical audio sampling rate 32 kHz to 192 kHz and LPCM
2CH
• Supports analog (L/R) audio sampling rate of 48 kHz
• Plug and play, with no software required
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
ANALOG DC 5V
POWER
OPTICAL
LR
INPUT
1 2 3
1ANALOG L/R INPUT
Connect to an audio source with analog (L/R) output with RCA
cables.
2OPTICAL INPUT
Connect from audio source equipment with optical output with an
optical cable.
3DC 5V and POWER LED
Connect the 5V DC power supply to the unit and plug the adaptor
into an AC outlet. The LED will illuminate when the device is
connected to an active power supply.
3
6.2 Rear Panel
SERVICE
HDMI OUT
ANALOGOPTICAL
50 60
720P
1 2 3 4
1SERVICE
Reserved for manufacturer use only.
2OPTICAL/ANALOG Switch
Switch to select between Optical or Analog L/R inputs.
3720p 50/60 Switch
Switch to select the 'blue screen' image output at either 720p/50
or 720p/60. The OSD will display current input audio and resolution
settings for 15 seconds.
4HDMI OUT
Connect to an HDMI equipped device such as an HDMI matrix,
switcher or HDTV/display. Audio sampling rates supported: Optical
up to 192 kHz or Analog up to 48 kHz.
4
7. CONNECTION DIAGRAM
SERVICE
HDMI OUT
ANALOGOPTICAL
50 60
720P
ANALOG DC 5V
POWER
OPTICAL
LR
INPUT
POWERLOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
OR
HDTV
HDMI Matrix
CD/DVD Player Media Player
Optical Digital
Input
Power
Supply
HDMI
Output
Analog Stereo
Input
5
8. SPECIFICATIONS
8.1 Technical Specications
Input Ports 1×L/R (Analog Stereo 2RCA), 1×Optical
Output Port 1×HDMI
Input Audio
Sampling Rate
32~192 kHz (Optical)
Output Audio
Sampling Rate
48 kHz (Analog Stereo)
32~192 kHz (Optical)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5 V/2.6 A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions 78.5 mm (W)×95.5 mm (D)×30 mm (H)
Weight 170 g
Chassis Material Aluminum
Color Black
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20 ~ 90 % RH (non-condensing)
Power Consumption 2.6 W
Andere Handbücher für CLUX-11HB
1
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CP-1261HS Bedienungsanleitung
CYP
CYP AU-D2 Bedienungsanleitung
CYP
CYP CDPS-US100R Bedienungsanleitung
CYP
CYP CPLUS-V2PE Bedienungsanleitung
CYP
CYP DCT-1D Bedienungsanleitung
CYP
CYP CM-397 Bedienungsanleitung
CYP
CYP CP-1262HAT Bedienungsanleitung
CYP
CYP CV-401H Bedienungsanleitung
CYP
CYP CSC-6030HB Bedienungsanleitung
CYP
CYP AU-11HB Bedienungsanleitung
CYP
CYP CSLUX-300I Bedienungsanleitung
CYP
CYP nT15FX03 Bedienungsanleitung
CYP
CYP CP-293N Bedienungsanleitung
CYP
CYP DCT-3 Bedienungsanleitung
CYP
CYP CLUX-1HLR Bedienungsanleitung
CYP
CYP CPT-387HD Bedienungsanleitung
CYP
CYP PRO-SDIHDMI Bedienungsanleitung
CYP
CYP SY-398H Bedienungsanleitung
CYP
CYP AU-D9 Bedienungsanleitung
CYP
CYP CM-330 Bedienungsanleitung
