CYP CDPS-US100R Bedienungsanleitung
CDPS-US100R
HDMI/HDBaseT to Dual HDMI 4K UHD Scaler
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2017 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 28/01/16 Preliminary release
VS1 28/03/17 Updated text/diagrams
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 Remote Control......................................... 5
6.4 OSD Menu.................................................. 5
6.5 IR Cable Pin Assignment........................... 9
6.6 RS-232 Protocol.......................................... 9
6.7 RS-232 and Telnet Commands .............. 10
6.8 Telnet Control .......................................... 13
6.9 WebGUI Control ...................................... 15
6.9.1 Scaler Settings ................................ 15
6.9.2 System Settings............................... 16
7. Connection Diagram ....................................17
8. Specications ................................................18
8.1 Technical Specications ........................ 18
8.2 Video Specications............................... 19
8.3 HDBaseT Specications .......................... 20
9. Acronyms .......................................................21
1
1. INTRODUCTION
This HDMI/HDBaseT to Dual HDMI 4K UHD Scaler is designed to extend
and scale HDMI signals for simultaneous output to two HDMI displays
while also extracting balanced analog audio. It supports 4K@30Hz
video, 3D, 36-bit Deep Color, and HD lossless audio as well as other
features dened by the latest HDMI specication. The HDBaseT input
support allows for uncompressed video and audio, as well as bi-
directional IR control and LAN extension via a single Cat.5e/6/7 cable
at up to 100m. The management of source/sink scenarios can be
controlled easily through the front panel with OSD, IR remote control,
RS-232, Telnet, or WebGUI. The Power over Cable (PoC) function can
power compatible 24V Transmitters, providing greater exibility in
installations.
2. APPLICATIONS
• Distributing incoming HDBaseT signals to two HDMI outputs
• Up-scale low resolution sources for output to HD or UHD displays
• Down-scale HD signals for display on lower resolution monitors
• Lecture room/showroom/meeting room/classroom display and
control
• Public commercial display extension
3. PACKAGE CONTENTS
• 1×HDMI/HDBaseT to Dual HDMI 4K UHD Scaler
• 1×Remote Control (CR-150)
• 1×IR Blaster Cable
• 1×IR Extender Cable
• 2×5-pin Terminal Blocks
• 1×24V/1.25A Power Adaptor
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes and/or a compatible HDBaseT Transmitter
with 24V PoC support.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly
recommended.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
5. FEATURES
• HDMI with 3D and 4K UHD support
• Supports HDCP 1.4 for all HDMI inputs and outputs
• Supports resolutions up to 4K UHD: 3840×2160@24/25/30Hz &
4096×2160@24Hz
• Supports HDMI data rates up to 10.2Gbps and “Deep Color” up to
1080p w/ 36-bit color
• Supports scaling low resolution sources up to 4K UHD output
resolutions
• Supports scaling 4K UHD resolution sources to HD or lower output
resolutions
• Supports mirrored output to two connected HDMI displays
• Receives extended HDMI, IR, and Ethernet signals across up to 100m
Cat.5e/6/7 cable
• Provides power to compatible HDBaseT Transmitters using 24V PoC
(Power over Cable)
• Supports balanced analog stereo output (from LPCM 2.0 sources
only)
• Supports Ethernet transmission rates up to 100Mbps
• Supports control via front panel with OSD, WebGUI, Telnet, RS-232,
and IR remote
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI
HDBaseT
POWER
MENU
ENTER
+
-
UHD SCALER
1 2 3 4 5 6
1POWER & LED: Press this button to power the unit on or place it into
stand-by mode. The LED will be lit when the unit is on and receiving
power. This unit will remember its last power state when unplugged.
2IR WINDOW: Accepts IR signals from the included IR remote for
control of this unit only.
3ENTER: Press to begin changing a setting within the OSD. Press a
second time to conrm the change made to the settings.
4MENU: Press to open or close the OSD menu.
5-/+ (MINUS/PLUS): Press to move up and down or adjust selections
within OSD menu.
Note: Pressing “MENU” and “+” together will reset the output
resolution to XGA@60Hz (1024×768). Pressing “Menu” and “-”
together will reset the output resolution to 720p@60Hz.
6LEDs: The illuminated LED indicates which source is currently
selected.
4
6.2 Rear Panel
12
HDMI OUT HDMI IN IR CAT5e/6/7
IN
INOUT
AUDIO OUT
RS-232
SERVICE
DC 24V
LAN
RX
TX
-
+
-
+
LR
1 2 3 4 5 76 8 9 10
1HDMI OUT 1~2: Connect to HDMI TVs, monitors or ampliers for
digital video and audio output.
2HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
3IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
4IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being
used is within direct line-of-sight of the IR Extender.
Note: Both IR IN and IR OUT are only to facilitate sending the signal
over HDBaseT to/from connected compatible Transmitters. Those
signals will not be used to control this product.
5CAT5e/6/7 IN: Connect to a compatible 24V PoC supporting
HDBaseT Transmitter with a single Cat.5e/6/7 cable for transmission
of all data signals.
Note: This system was tested with 23 AWG Cat.6 cable. Results may
vary with cable of a different specication.
6AUDIO OUT: Connect to powered speakers or an amplier for
balanced stereo analog audio output.
7RS-232: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
8LAN: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI and to extend the
network across the HDBaseT connection.
9SERVICE: This port is reserved for manufacturer use only.
10 DC 24V: Plug the 24V DC power adapter into this port and connect
it to an AC wall outlet for power.
5
6.3 Remote Control
1POWER: Press to power on the unit or place
it into stand-by mode.
2MENU: Press to open or close the OSD
menu.
3 ▲/▼/◄/►: Within the menu use the UP/
DOWN keys to move vertically, and use
LEFT/RIGHT to change the settings of a
selected menu item.
4ENTER: Press to begin changing a setting
within the OSD. Press a second time to conrm the change made
to the settings.
5HDMI: Press to switch to the HDMI input.
6HDBaseT: Press to switch to the HDBaseT input.
7720P: Press to change the output resolution to 720p@60Hz.
81080P: Press to change the output resolution to 1080p@60Hz.
94K: Press to change the output resolution to 4K@24Hz.
6.4 OSD Menu
LEVEL 1 LEVEL 2 LEVEL 3
Input Source HDMI
HDBaseT
Output Format HD Pass_through
480i@60
480p@60
576i@50
576p@50
720p@50
720p@60
1080i@50
1080i@60
POWERMENU
HDBaseT
4K720P 1080P
ENTER
HDMI
INPUT
CR-150
2
3
1
4
56
7
8
9
Andere Handbücher für CDPS-US100R
1
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CV-401D Bedienungsanleitung
CYP
CYP CP-1261D Bedienungsanleitung
CYP
CYP DCT-3 Bedienungsanleitung
CYP
CYP SY-P290 Bedienungsanleitung
CYP
CYP CP-VSRGB Bedienungsanleitung
CYP
CYP CM-398M Bedienungsanleitung
CYP
CYP CP-1262DI Bedienungsanleitung
CYP
CYP AU-D3 Bedienungsanleitung
CYP
CYP CPLUS-VHHE Bedienungsanleitung
CYP
CYP CP-292 Installationshandbuch
CYP
CYP CDPH-1S Bedienungsanleitung
CYP
CYP CLUX-SDI2DVIA Bedienungsanleitung
CYP
CYP CP-1261HS Bedienungsanleitung
CYP
CYP DCT-3AN Installationshandbuch
CYP
CYP CSLUX-300I Bedienungsanleitung
CYP
CYP AU-11HB Bedienungsanleitung
CYP
CYP VHC-1 Bedienungsanleitung
CYP
CYP CSC-104 Bedienungsanleitung
CYP
CYP DCT-2 Bedienungsanleitung
CYP
CYP CPLUS-VPE2DD Installationshandbuch
