CYP CPLUS-V2PEL Bedienungsanleitung
CPLUS-V2PEL
4K UHD+HDMI to Dual HDMI Scaler
with Signal Event Automation
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 18/05/18 Preliminary release
VS1 21/05/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 OSD Menu.................................................. 5
6.4 RS-232 Control ......................................... 15
6.5 RS-232 Commands.................................. 15
7. Connection Diagram ....................................27
8. Specications ................................................28
8.1 Technical Specications ........................ 28
8.2 Video Specications............................... 29
8.2.1 Supported Resolutions................... 29
8.2.2 4K Conversion Rules....................... 30
8.3 Audio Specications............................... 31
8.4 Cable Specications .............................. 32
9. Acronyms .......................................................32
1
1. INTRODUCTION
This HDMI 4K UHD Scaler with Test Patterns and Signal Event
Automation is designed to upscale 1080p signals into 4K UHD (18Gbps)
or downscale 4K UHD (18Gbps) signals into 1080p with synchronized
digital audio output. A friendly and simple interface design allows
the user to control the unit while viewing the OSD directly on the
HDMI outputs. The input signal can be output to both HDMI outputs
simultaneously with a different resolution on each or the unit can
generate a test pattern at a preferred video resolution for easy on-site
display testing and validation.
Additional functionality such as EDID and HDCP management, and
basic signal event automation (via RS-232 or CEC) is also provided.
This UHD Scaler is the best tool to use with your HD and UHD signals.
This unit can be controlled easily by use of the front panel controls (with
OSD) or by RS-232.
2. APPLICATIONS
• HDMI signal splitting
• On-site equipment testing
• Production testing
• R&D design and testing
3. PACKAGE CONTENTS
• 1×HDMI to Dual HDMI Scaler
• 1×5V/2.6A DC Power Adapter
• 2×3-pin Terminal Block to 9-pin D-sub Adapter Cable
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI input source equipment such as a media player, video game
console or set-top box.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
5. FEATURES
• HDMI input and output with 18Gbps (600MHz) 4K UHD with HDR
support
• DVI 1.0 compliant with the use of an HDMI-DVI adaptor
• HDCP 2.2 and HDCP 1.x compliant
• 1 HDMI input and 2 HDMI outputs
• Supports HDCP 2.2 to HDCP1.4 conversion
• HDMI signal bypass on both outputs or upscales 1080p signals to 4K
on output B and downscales 4K signals to 1080p on output A
• Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit)
• Supports 4K HDR at 24/30Hz (YUV 4:4:4) and 50/60Hz (YUV 4:2:0) with
up to 12- bit color
• Supports 16-bit Deep Color up to 1080p@60Hz
• Supports pass-through of many audio formats including LPCM
2.0/5.1/7.1, Bitstream, and HD Bitstream
• Supports color space conversion of 4K@50/60Hz (4:4:4, 8-bit) or
4K@any (10/12-bit) sources
• Integrated EDID and HDCP management
• Basic signal event automation (via RS-232 or CEC)
• Test pattern generation at selected resolutions for on-site display
testing
• Controllable via front panel with OSD, and RS-232
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERV.
POWER 4K2K SYNC MENU PATTERN
TEST
ENTER
-
+
1 2 3 4 5 6 7
1SERV.: This slot is reserved for rmware update and EDID upload
use only.
2POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
34K2K LED: This LED will illuminate when the input source contains a
4K UHD signal.
4SYNC LED: This LED will illuminate when the input source is sending
signal.
5MENU Button: Press to enter the OSD menu, or to back out from
menu item.
6 − & +/TEST PATTERN Buttons: When the OSD menu is in use, press
these buttons to move within the menu. Outside of the OSD,
press these buttons together to instantly set the output timing to
1280x720@60Hz and display test patterns on both outputs.
7ENTER Button: Press to conrm a selection within the OSD or to go
deeper into a menu item.
4
6.2 Rear Panel
HDMI IN HDMI OUT RS-232
DC 5V
A B
OUT
IN
1 2 3 4
1HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
2HDMI OUT A~B: Connect to HDMI TVs, monitors or ampliers
for digital video and audio output. Each output can display a
different resolution with a choice between the HDMI source or a
test pattern.
3RS-232: Connect the upper 3-pins directly to a PC, laptop or other
serial control device to send RS-232 commands to control the unit.
Connect the lower 3-pins directly to a serial controllable device to
send signal event automation RS-232 commands to it.
4DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
5
6.3 OSD Menu
All primary functions of this unit can be controlled by using the OSD (On
Screen Display) which is activated by pressing the Menu button on
the front of the unit. Use the + (PLUS), − (MINUS), and ENTER buttons to
navigate the OSD menu. Press the Menu button to back out from any
menu item and then press it again to close the menu.
MAIN MENU STRUCTURE
Output
EDID
HDCP
OSD
Test Pattern A
Test Pattern B
Information
Firmware Update
EDID Upload
Factory Setting
The individual functions of the OSD will be introduced in the following
section. Items marked in BOLD are the factory default settings.
OUTPUT
2nd Level 3rd Level
Output A
Input 4K2K PASS THROUGH
Down Scaler 1080P
Fix Color YUV 4:2:0
Fix Deep Color 8 bit
YUV 4:2:x to RGB
Fix Color RGB
Output B
Input 1080P PASS THROUGH
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CP-1262DE Bedienungsanleitung
CYP
CYP CV-401V Bedienungsanleitung
CYP
CYP CPRO-12ES Bedienungsanleitung
CYP
CYP AU-1H1DD Bedienungsanleitung
CYP
CYP CDB-6 Bedienungsanleitung
CYP
CYP SY-P293 Bedienungsanleitung
CYP
CYP CDPS-4KQ-AD Bedienungsanleitung
CYP
CYP CUSB-603 Bedienungsanleitung
CYP
CYP CPLUS-V11PE8 Bedienungsanleitung
CYP
CYP CPLUS-VPE2DD Bedienungsanleitung
CYP
CYP CP-294 Bedienungsanleitung
CYP
CYP CP-280H Bedienungsanleitung
CYP
CYP SY-298H24 Bedienungsanleitung
CYP
CYP CDM-150 Bedienungsanleitung
CYP
CYP CSC-5500 Bedienungsanleitung
CYP
CYP CLUX-1HLR Bedienungsanleitung
CYP
CYP CM-1391 Bedienungsanleitung
CYP
CYP DCT-15 Bedienungsanleitung
CYP
CYP CLUX-SDI2DVIA Bedienungsanleitung
CYP
CYP DCT-39 Bedienungsanleitung
