CYP CDPS-U4H4HSA Bedienungsanleitung
CDPS-U4H4HSA
4 by 4 HDMI with Audio Matrix Fast Switch
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 May 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 21/12/15 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 OSD Menu.........................................5
6.4 Remote Control..............................11
6.5 IR Cable Pin Assignment................12
6.6 RS-232 Protocols .............................12
6.7 RS-232 & Telnet Commands..........13
6.8 Telnet Control .................................17
6.9 WebGUI Control .............................19
7. Connection Diagram .......................... 23
8. Specications ...................................... 24
9. Acronyms ............................................. 26
1
1. INTRODUCTION
The 4 by 4 HDMI matrix with audio which allows HDMI and audio
signal to be routed to and displayed on connected HDMI displays
and or audio output equipments simultaneously. Additional audio
selection and extension allows users to utilise both video and audio
more efciency. With fast switching technology the device can
greatly eliminate the time required by swapping or turning ON/OFF
the connected displays. It supports 4Kx2K, 3D, 36-bit Deep Color, Hi-
Def lossless audio and other features dened by HDMI specications.
The management of source/sink scenarios can be operated easily
through on-panel buttons, IR remote control, RS-232 or Ethernet
protocol.
2. APPLICATIONS
• Home Theater/Entertainment
• Lecture Room/Hall Presentation
• Show Room/Demo Room
• Public Commercial Display
• Information Board
3. PACKAGE CONTENTS
• 4 by 4 HDMI 4Kx2K Matrix with Audio
• Remote Control with Battery
• Left & Right Rack Ears
• 12V/3A DC Power Adaptor
• IR Receiver Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipments such as Blu-ray/DVD/PS3 player or Set-
Top-Box and output HDMI TV/Display and or audio amplier with
connection cables.
2
5. FEATURES
• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
• Supports four HDMI inputs and four HDMI outputs
• Supports external audio inputs and outputs for HDMI outputs
selection and additional audio extension up to 300M/984ft with
sampling rate at 48kHz
• Supports HDMI and Optical audio format for both HDMI and Optical
outputs selection
• Support individual output MUTE function on both video and audio
• Displays any of four High-Denition sources on four HDTV displays
simultaneously with fast switch
• 3DTV Pass-Through
• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 & 50/60
Y420 4096x2160@24 & 50/60Hz Y420)
• Supports data rate up to 300Mbps or 9Gbps and Deep Color up to
1080p 36-bit
• Supports individual EDID or common EDID
• Supports LPCM 2CH with sampling up to 192kHz
• Input port HDCP support Standard and Apple mode. The Apple
mode selection to guarantees the use of Apple devices
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
IN 1IN 2IN 3IN 4AUDIOHDMI
OUT AOUT B OUT C OUT DVIDEO
ENTER
MENU
PRESET
ALLLOCK
+
-
DIGITALMUTE
TAKE
CANCEL
4X4 HDMI WITH AUDIO MATRIX FAST SWITCH
1 2 3 5 12 14 15 18
4 6
7
8 9
10
11 13 1614 17
1POWER: Press this button to turn ON the device and the LED will
illuminated.
2IR Window: This IR Receiver receives the remote control signal from
the package include remote control only.
3IN 1~4: Press these IN buttons to select an input from the input
sources. Under audio selection press it continually to select audio
format. For example: HDMI OUT A need to output HDMI IN 2's
video with S/PDIF 2 audio format. Setting steps should be press
VIDEO→OUT A→IN 2→ TAKE→VIDEO, AUDIO→OUT A→IN 2(press
twice:S2)→TAKE→AUDIO.
4OUT A/D: Press these buttons along with an IN buttons to select an
input source for an output display. i.e. OUT A→ IN1→TAKE or OUT B
& OUT C→ IN4→TAKE.
5AUDIO: Press this button to select audio matrix setting only for
outputs.
6VIDEO: Press this button to select video matrix setting only for
outputs.
7HDMI: Press this button under AUDIO to select HDMI audio.
8DIGITAL: Press this button to select an input source audio.
9MUTE: Press this button to mute video image or audio output
sound. To unmute, press it again.
10 TAKE: Press this button to conrm the selection. If this button is not
pressed, all selection will be avoid.
11 CANCEL: Press this button to cancel the selection.
12 ENTER: Press to conrm the selection.
13 MENU: Press to enter into the menu.
4
14 +/-: Press these buttons to move up/down under menu selection.
15 PRESET: Press “PRESET”, the OLED menu will show Preset then select
IN 1~4. Preset 5~8 selection, press IN 1/2/3/4 twice. Press “TAKE” to
conrm the selection or press “CANCEL” to exit the selection.
16 All: Press this button to select all outputs with an input selection.
17 LOCK: Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
18 LCM: Displaying Input and Outputs selection and menu selection.
6.2 Rear Panel
HDMI IN
1234
HDMI OUT OPTICAL IN
ABCD
12
OPTICAL OUT
AB
AUDIO-CATCONTROL
3C 4D
SERVICE
RS232IR IN DC 12V
1 2 3 4 5 6 7 8 9 10
1HDMI IN: Connect from source equipments such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output
image and or audio display.
3OPTICAL IN: Connect from source equipment such as DVD, Blu-ray,
PS3 or etc. with audio signal.
4OPTICAL OUT: Connect to active speaker or audio amplier for
audio distribution.
5AUDIO-CAT 3C/4D: Connect this port 3C to the AUDIO-CAT output
of the Transmitter unit and 4D to the AUDIO-CAT input of the
Receiver unit using CAT5e/6/7 cable.
With 192kHz sampling rate over a single CAT5e/6/7 cable up to
100m/328ft, 96kHz sampling rate up to 150m/492ft and 48kHz
sampling rate up to 300m/984ft.
6SERVICE: This slot is reserved for rmware update use only.
7CONTROL: Connect from PC/Laptop with active internet service
for WebGUI control with RJ-45 terminated cable.
5
8RS232: Connect from PC/Laptop for RS-232 command sending to
control the device.
9IR IN: Connect the IR Receiver included in the package for IR
signal receive from the included remote control.
10 DC 12V: Connect the adaptor with power cord included in the
package and connect to AC wall outlet for power supply.
6.3 OSD Menu
Main Menu Sub Menu Description Default
EDID Mode All All Input port is using same
EDID.
In menu “EDID All”, can
select suitable EDID.
All
Appoint Each Input port can select
individual EDID.
In menu “EDID IN1~4” select
suitable EDID.
Exit
EDID All Sink A Copy Output A display EDID 8/2D/
PCM/1080p
Sink B Copy Output B display EDID
Sink C Copy Output C display EDID
Sink D Copy Output D display EDID
8/2D/
PCM/720p
Standard EDID,
Content: deep color/2D3D/
audio/native resolution
8/2D/
PCM/1080p
Standard EDID,
Content: deep color/2D3D/
audio/native resolution
8/2D/
PCM/4K2K
Standard EDID,
Content: deep color/2D3D/
audio/native resolution
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP OR-HD62CD-4K22 Bedienungsanleitung
CYP
CYP CPLUS-V4H1HP Bedienungsanleitung
CYP
CYP CMLUX-88S Bedienungsanleitung
CYP
CYP EL-C41C Bedienungsanleitung
CYP
CYP DCT-17 Bedienungsanleitung
CYP
CYP CH-21 Bedienungsanleitung
CYP
CYP CSC-6030CVE Bedienungsanleitung
CYP
CYP CLUX-42S Bedienungsanleitung
CYP
CYP CLUX-41W Bedienungsanleitung
CYP
CYP PU-2H8HBTE-AD Bedienungsanleitung
CYP
CYP EL-42S Bedienungsanleitung
CYP
CYP CLUX-21N Bedienungsanleitung
CYP
CYP EL-41PIP Installationshandbuch
CYP
CYP XA-S11 Bedienungsanleitung
CYP
CYP AU-11CA Bedienungsanleitung
CYP
CYP CED-1M Bedienungsanleitung
CYP
CYP PU-8H8HBT Bedienungsanleitung
CYP
CYP EL-C61C Bedienungsanleitung
CYP
CYP EL-8100V Bedienungsanleitung
