CYP CPRO-3D42S Bedienungsanleitung

CPRO-3D42S

HDMI 4 by 2 v1.4 Switcher

with HEAC

Operation Manual

CPRO-3D42S

Draft Manual

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 January 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

RDV1 20110103 Preliminary Release

Table of Contents

1. Introduction..................................................................................1

2. Applications.................................................................................1

3. PackageContents......................................................................1

4. SystemRequirements..................................................................1

5. Features........................................................................................2

6. Specifications..............................................................................2

7. OperationControlsandFunctions............................................. 3

7.1 Front Panel .................................................................... 3

7.2 Rear Panel .................................................................... 4

8. RemoteControl............................................................................5

9. RS-232Protocol............................................................................5

9.1 Pin Definition ................................................................. 5

9.2 Command .................................................................... 5

10.ConnectionandInstallation...................................................... 6

1. Introduction

This is a high performance four input & two outputs HDMITM Switcher supports,

the output ports support Audio Return Channel (ARC) and HDMI Ethernet

Channel (HEC) follow by HDMI v1.4 specication. The ARC provides an S/

PDIF link from and HDMITM sink and output through ARC port to AVR to get

true audio from the sink. The HEC feature adds a connection to the HDMI

link that is capable of carrying the same data as a full duplex, 100Mbps

Ethernet connection. Using an HDMI with HEAC cable allowing for convenient

integration of Digital Televisions (DTVs) into the end user’s home network system.

2. Applications

• Simultaneous display one HDMI source on 2 TVs

• Professional audio display

• Showroom display

• Education demo

• Commercial usage

3. Package Contents

• 4 x 2 HDMI Switcher with HEAC

• 5V/2.6A DC power supply adaptor

• Operation Manual

4. System Requirements

• Source equipments with HDMI output connector(s)

• Displays TV/monitor with HDMI input connector(s)

• Two output ports can be connect to the Ethernet Channel (HEC) of Digital

Televisions (DTVs) from end user’s home network system and Audio Return

Channel (ARC) can output to the AVR to get true audio from the sink.

5. Features

• Support multiplexed HDMI 4-input and 2-output

• Two output ports support Ethernet Channel (HEC) and Audio Return

Channel (ARC) follow by HDMI v1.4 specication

• HDMI 1.4 support:

√ Audio Return Channel (ARC)

√ 3D

√ CEC 1.4

√ HDMI Ethernet Channel (HEC), enabling high-speed, bi-directional

networking at up to 100Mb/sec

• HDCP repeater support

• Deep Color support 36/30/24-bit, 1080p@60Hz

• EDID can selected Standard, TV or Lock EDID feature

• Audio support:

√ HDMI 1.4 compatible audio interface

√ Dedicated, exible audio input/output port

√ Dolby TrueHD

√ DTS-HD Master Audio

√ Full audio input and output support

6. Specications

Frequency Bandwidth 2.25Gbps (single link)

Input Ports 4x HDMI (Female type)

Output Ports 2 x HDMI (Female type)

2 x Ethernet

2 x ARC

Output Resolution 480i ~1080p 50/60, 1080p24, VGA~UXGA

ESD Protection Human Body model: ±8kV (air-gap discharge)

± 4kV (contact discharge)

Dimensions (mm) (W) x (D) x (H)

Weight(g)

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0°C ~ 40°C/ 32°F ~104°F

Storage Temperature -20°C ~ 60°C/ -4°F ~140°F

Relative Humidity 20~90% RH (non-condensing)

Power Consumption 4.1W

Transmitter

Input Port 1 x USB (B type)

Output Port 1 x RJ45

Receiver

Input Port 1 x RJ45

Output Ports 4 x USB (A type)

ESD Protection Human body model: ± 10kV (air-gap discharge)

± 6kV (contact discharge)

Power Supply 5V / 3.2A (US/EU standards, CE/FCC/UL certied)

Dimensions(mm) 102 (W) x 95 (D) x 25 (H)

Weight(g) 214 / Transmitter, 220 / Receiver

Chassis Material Aluminum

Silkscreen Color Silver

Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F

Power Consumption 5W / Transmitter, 12W / Receiver

Relative Humidity 20~90% RH (non condensing)

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1FrontPanel

12 43 5

1. IR Remote Control Sensor.

2. Audio/3D content indicator: The system will automatically detect

incoming audio/video signal and the Green LEDs will illuminate

accordingly.

3. Input selection: Press input button to select input source, the Blue LED will

illuminate accordingly.

4. EDID selection: This EDID control button is determined if you are going to

use the EDID from the display attached to output 1 or use an onboard

EDID the Green LED will illuminate accordingly. When press EDID button

longer then 3 seconds, the RED LED will illuminate which means the EDID

already lock STD or TV EDID as you selected accordingly.

5. Power LED Indicator: The LED will illuminate when the power is

connected.

7.2RearPanel

1 322 2 4

1. RS-232: This slot is for RS-232 control signal sending and is for service only.

2. HDMI 1~2out/ARC 1~2/Ethernet 1~2: Connect Ethernet and Audio Return

Channel to capabilities of sink, The sink will pass the Ethernet and Audio

signal via HDMI input to HDMI output port individually, each HDMI will

separate the Ethernet and audio and send it out from ARC and Ethernet

ports. For the ARC, the user had a sink with a built-in tuner or DVD player

and wanted to send content “upstream” from the TV back to the audio

system to play and multi-channel audio.

The HDMI Ethernet Channel, it can consolidates video, audio and data

streams into a single HDMI cable to the Ethernet Hub/AP to access the

internet and it incorporates a dedicated data channel into the HDMI

link, enabling high-speed, bi-directional networking at up to 100Mb/sec

to control and search from the sink.

Note:

1. Be sure to connect devices with one of the new cables designed

to support HDMI Ethernet Channel functionality, either the

standard HDMI cable with Ethernet or High Speed HDMI cable

with Ethernet.

2. When the HDMI output with the Audio and ARC are exist at the

same time the ARC will be the rst priority to access.

3. HDMI input 1~4: Connect to HDMI or DVI sources equipment such

as DVD player or set-top-box for input video and audio sending.

4. Power: Plug the DC 5V power supply into the splitter and connect

the adaptor to AC wall outlet.

8. Remote Control

① Power button: Press to switch On the device,

press it again to set the device in standby mode.

② 1~4: Press the desire input button to select the

input source. 2

9. RS-232 Protocol

9.1PinDenition

CPRO-3D42S Remote Control Console

PIN Denition

►

◄

PIN Denition

1 NC 1 NC

2 Tx 2 Rx

3 Rx 3 Tx

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 9600bps

Data bit: 8bits

Parity: None

Stop bit: 1 bit

Flow Control: None

9.2Command

Command Action

POWER 00 Power Off (standby)

POWER 01 Power On

PORT 11 Output Select Input 1

PORT 12 Output Select Input 2

PORT 13 Output Select Input 3

PORT 14 Output Select Input 4

PORT 21 Output Select Input 1

PORT 22 Output Select Input 2

PORT 23 Output Select Input 3

PORT 24 Output Select Input 4

10. Connection and Installation

DVD

DVD Blu-Ray

Blu-Ray

HDTV

AVR1

PC NB

HUBHUB

HDTV

INTERNET

Andere Handbücher für CPRO-3D42S

Inhaltsverzeichnis

Andere CYP Schalten Handbücher

CYP

CYP EL-42SA Bedienungsanleitung

CYP

CYP DCT-17 Bedienungsanleitung

CYP

CYP EL-41AT Bedienungsanleitung

CYP

CYP CPLUS-V3H1H Bedienungsanleitung

CYP

CYP EL-41SY Bedienungsanleitung

CYP

CYP AU-D21 Bedienungsanleitung

CYP

CYP CMLUX-4H4CAT Bedienungsanleitung

CYP

CYP CSSW-91WF Bedienungsanleitung

CYP

CYP EL-C41C Bedienungsanleitung

CYP

CYP CPRO-3D41GAME Bedienungsanleitung

CYP

CYP CLUX-31GAME Bedienungsanleitung

CYP

CYP EL-41S-4K22 Bedienungsanleitung

CYP

CYP XA-S11 Bedienungsanleitung

CYP

CYP CLUX-42SA Bedienungsanleitung

CYP

CYP CLUX-31GAME Bedienungsanleitung

CYP

CYP PU-8H8HBT Bedienungsanleitung

CYP

CYP EL-42S Bedienungsanleitung

CYP

CYP EL-42S Bedienungsanleitung

CYP

CYP EL-31SY Bedienungsanleitung

CYP

CYP CDPS-U4H4HSA Bedienungsanleitung

CYP

CYP EL-5500 Bedienungsanleitung

CYP

CYP CLUX-41AT Bedienungsanleitung

CYP

CYP PU-444HBTE Bedienungsanleitung

CYP

CYP CH-1539TXPLPD Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung