CYP AU-D41 Bedienungsanleitung
AU-D41
4-Way Optical Audio Switcher (with IR remote)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 24/06/2019 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. Features..................................................6
5. Operation Controls and Functions.......7
5.1 Top Panel ...................................................... 7
5.2 Left Panel ...................................................... 7
5.3 Right Panel................................................... 8
5.4 Rear Panel..................................................... 8
5.5 Remote Control.......................................... 8
6. Connection Diagram .............................9
7. Specifications...................................... 10
8. Acronyms............................................. 11
6
1. INTRODUCTION
The 4 by 1 Optical Audio Switcher has four optical inputs and one optical
output and allows users with multiple optical sources to switch between
sources without delay. The device has a built-in last memory function and
IR remote control which provides a more user-friendly experience.
2. APPLICATIONS
Expand the available optical inputs for:
High performance stereo systems
Home theatre systems
Audio showroom
Presentation systems
3. PACKAGE CONTENTS
4 by 1 Optical Audio Switcher
IR Remote Control (CR-72)
5 V/1 A Power Adaptor
Operation Manual
4. FEATURES
Optical sampling rate supports up to 192 kHz
Low power consumption
Up to 24-bit resolution
7
5. OPERATION CONTROLS AND FUNCTIONS
5.1 Top Panel
3421
1
1Input LED 1~4: The blue LED will illuminate to indicate the selected
source.
5.2 Left Panel
4321
Optical In
1
1Optical In: Connect to the source equipment such as DVD/Blu-ray
players, set-top boxes or game consoles for audio input signal routing.
8
5.3 Right Panel
Power Input Optical
Out
IR
1 2 3 4
1Power: Press to turn on the device or to set it to standby mode. The
blue LED on the top panel will illuminate when the device is powered
and switched on.
2Input: Select the input port from 1 to 4. The blue LED on the top panel
will illuminate to indicate the selected source.
3Optical Out: Connect to an amplifier or active speaker with optical
cable for audio output.
4IR: IR receiver window that receives the IR signal from the supplied
remote control. Please ensure that there is a clear line-of-sight
between the receiver and the remote.
5.4 Rear Panel
DC 5V
1
1DC 5V: Connect the 5V DC power supply into the unit and plug the
adaptor to an AC wall outlet.
5.5 Remote Control
1POWER: Press to turn on the devic; press it again
to put the device into standby mode.
2INPUT 1~4: Press the required input button to
select the input source.
1
2
9
6. CONNECTION DIAGRAM
7m3m 3m
60°
m
m
3m
4 by 1 Optical Audio
Switcher
3421
DVD or Blu-ray Player Set-top Box
Games Console
Digital Audio Inputs
(Optical)
Digital Audio Inputs
(Optical)
AV Receiver
Remote
PC/Laptop
10
7. SPECIFICATIONS
Input Ports 4×Optical
Sampling Rate Up to 192 kHz
Output Port 1×Optical
Audio Format PCM2, Dolby 5.1 & DTS 5.1 (Pass through)
Power Supply 5 V/1 A DC ( US/EU standards, CE/FCC/UL
certified)
ESD Protection Human body model:
± 8kV (air-gap discharge)
± 6kV (contact discharge)
Dimensions 85 mm (W)×85 mm (D)×35 mm (H)
Weight 90 g
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 °C~40 °C/32 °F~104 °F
Storage Temperature −20 °C~60 °C/−4 °F~140 °F
Power Consumption <1 W
Relative Humidity 20~90 % RH (non-condensing)
Audio Specifications:
Input Level/Frequency Optical 0dBFS 1 kHz
Output Terminal Optical
Output Level 0~0.05dBFS
THD+N <0.01%
Frequency Response ± 1dBFs
SNR > 90dB
Crosstalk < -90dB
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP OR-HD62CD Bedienungsanleitung
CYP
CYP CLUX-41AP Bedienungsanleitung
CYP
CYP CPLUS-401V Bedienungsanleitung
CYP
CYP EL-21SY Bedienungsanleitung
CYP
CYP CH-2537TXM-TB Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP CPRO-U4H1HFS Bedienungsanleitung
CYP
CYP EL-31SY Bedienungsanleitung
CYP
CYP CLUX-21N Bedienungsanleitung
CYP
CYP CH-2537TXWPUS Installationshandbuch
CYP
CYP CFSW-51MHL Bedienungsanleitung
CYP
CYP CPLUS-V4H1H Bedienungsanleitung
CYP
CYP CDPS-41SQN Bedienungsanleitung
CYP
CYP MED-AS60 Bedienungsanleitung
CYP
CYP EL-42S Bedienungsanleitung
CYP
CYP EL-7500V Bedienungsanleitung
CYP
CYP CLUX-41W Bedienungsanleitung
CYP
CYP CLUX-31GAME Bedienungsanleitung
CYP
CYP CMIR-44 Bedienungsanleitung
CYP
CYP EL-5500 Bedienungsanleitung
