CYP MED-AS60 Bedienungsanleitung
Operation Manual
Operation Manual
Multi-Input Switcher with Multi-Window Display
MED-AS60
®
registered trademarks of HDMI licensing Administrator, Inc.
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of
the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for sucient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/10/23 Preliminary release
CONTENTS
1. Introduction.......................................................................1
2. Applications ......................................................................1
3. Package Contents ............................................................1
4. System Requirements......................................................2
5. Features.............................................................................2
6. Operation Controls and Functions .................................3
6.1 Front Panel...................................................................3
6.2 Rear Panel....................................................................4
6.3 RS-232 Pinout and Defaults.........................................5
6.4 Software Control...........................................................6
6.4.1 Software Installation............................................6
6.4.2 Device Connection ..............................................7
6.4.3 Settings Tab.........................................................8
6.4.4 System Tab........................................................10
6.5 Serial Commands....................................................... 11
7. Connection Diagram ......................................................20
8. Specications .................................................................21
8.1 Technical Specications .............................................21
8.2 Video Specications ...................................................22
8.3 Audio Specications ...................................................23
8.3.1 Digital Audio ......................................................23
8.4 Cable Specications...................................................24
9. Acronyms ........................................................................25
1
1. INTRODUCTION
This Multi-Input Switcher with Multi-Window Display unit supports all of
the most common professional video formats used by medical devices at
resolutions up to 1080p@60Hz (4:4:4, 12-bit). Available inputs include: 4
HDMI, 2 SDI, 2 RGBHV (VGA), and 2 composite video. After connecting
multiple medical device signal sources, this unit converts all of the signals
to HDMI to allow the information to be integrated together within a variety
of convenient multi-window (up to 4 simultaneous windows) preset
arrangements for output and easy monitoring. With two independently
congured video output channels it’s possible to arrange the information
to match two dierent viewing scenarios simultaneously while a third,
independently switchable, output can select which multi-window channel to
monitor.
This multiviewer is optionally expandable with the addition of external video
management units to enable recording and/or streaming the content of any
of the video outputs for archival or educational purposes if required. Control
is provided via front panel buttons, easy to use PC software, or RS-232
commands.
2. APPLICATIONS
• Medical Equipment Multiviewer and Monitoring
• Lecture Room Presentations
• Showrooms & Demo Rooms
3. PACKAGE CONTENTS
• 1× Multi-Input Switcher with Multi-Window Display
• 1× 24V/2.7A DC Power Adapter
• 1× 3-pin Terminal Block
• 1× Shockproof Feet (Set of 4)
• 1× Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI, VGA, SDI, and composite video source equipment such as video
cameras, medical equipment, or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio ampliers.
• Windows 10 or later PC for conguration and control.
• External network streaming/recording unit. (Optional)
5. FEATURES
• HDMI 1.4 and DVI 1.0 compliant (with the use of an HDMI-DVI adapter)
• HDCP 1.x compliant
• 4 HDMI, 2 SDI, 2 RGBHV (VGA), and 2 composite video inputs
• 5 HDMI outputs (2 unique output channels, other ports are mirrored)
• HDMI inputs/outputs support up to 1080p/WUXGA (6.75Gbps,
1080p@50/60Hz 4:4:4, 12-bit) video input and output
• HDMI inputs/outputs support 2 channel LPCM audio
• SDI inputs support the following video standards: SMPTE 259M-C,
SMPTE 292M, and SMPTE 424M/425M-A
Note: SDI audio is not supported.
• Composite video inputs support both NTSC and PAL
• Supports conversion of multiple video formats to HDMI output
• Supports dual independent output paths with selectable full screen or
multi-window congurations. Multi-window congurations include PiP,
Equal Quad-view, Large-Left Quad-view, and Large-Top Quad-view with
denable primary window source.
• Independent audio source selection via RS-232
• Intuitive and easy adjustment of multiviewer window congurations and
routing using the Windows PC software
• Control is provided via front panel buttons, easy to use PC software, or
RS-232 commands
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IP B
HDMI OUT B
HDMI OUT A
IP
12 PORT
A
CAM 2
SDIHDMIVGACVBS
1
2
CAM 1
SDIHDMIVGACVBS
RS-232
TX RXTX RX
SERVICE DC 24V
GROUP SELECT LINK
21 3 4 5 7 8 9 106
1IP A/B Button & LEDs: Press this button to toggle between monitoring
HDMI output A or B on the IP output. The LED will illuminate to indicate
which output is currently being monitored by the IP output.
2IP HDMI Output Port: Connect to an HDMI TV, monitor, amplier or
other HDMI receiving device for digital video and audio output.
Note: This output port is primarily intended for monitoring and will
typically be connected to a IP streaming or recording device.
3HDMI OUT A Ports 1 & 2: Connect to HDMI TVs, monitors, or ampliers
for digital video and audio output.
4HDMI OUT B Ports 1 & 2: Connect to HDMI TVs, monitors, or ampliers
for digital video and audio output.
5GROUP SELECT 1 Button and LEDs: Press this button to sequentially
switch through the available sources to display in the “Group 1” window.
The LED will illuminate to indicate which source is currently selected.
6GROUP SELECT 2 Button and LEDs: Press this button to sequentially
switch through the available sources to display in the “Group 2” window.
The LED will illuminate to indicate which source is currently selected.
7CAM 1 & 2 Link LEDs: These LEDs will illuminate to indicate that a live
source has been detected on the associated input port. When no source
is detected the LED will remain o.
8RS-232 3-pin Terminal Block: Connect directly to a PC, laptop, or
other serial control device with a 3-pin adapter cable to send RS-232
commands to control the unit.
9SERVICE USB 2.0 Port: This port is reserved for rmware update use
only.
10 DC 24V Port: Plug the 24V DC power adapter into this port and connect
it to an AC wall outlet for power.
4
6.2 Rear Panel
HDMI IN
HDMI IN
SDI IN
SDI IN
VHBGR
VHBGR
CVBS
CVBS
CAM 2
CAM 1
GROUP 1 GROUP 2
1 3 42
1GROUP 1:
SDI IN Port: Connect to SDI source equipment such as a video camera,
medical equipment, or set-top box.
Note: SDI audio is not supported.
HDMI IN Port: Connect to HDMI source equipment such as a video
camera, medical equipment, or set-top box.
RGBHV 5-BNC Port: Connect to VGA source equipment such as a PC,
medical equipment, or set-top box. The use of a 15-pin to 5-BNC adapter
may be required.
Note: YUV, RGBS and RGsB sources are not supported.
CVBS Port: Connect to composite video source equipment such as a
video camera or medical equipment.
2GROUP 2:
SDI IN Port: Connect to SDI source equipment such as a video camera,
medical equipment, or set-top box.
Note: SDI audio is not supported.
HDMI IN Port: Connect to HDMI source equipment such as a video
camera, medical equipment, or set-top box.
RGBHV 5-BNC Port: Connect to VGA source equipment such as a PC,
medical equipment, or set-top box. The use of a 15-pin to 5-BNC adapter
may be required.
Note: YUV, RGBS and RGsB sources are not supported.
CVBS Port: Connect to composite video source equipment such as a
video camera or medical equipment.
3CAM 1 Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
4CAM 2 Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.
5
6.3 RS-232 Pinout and Defaults
Serial Port Default Settings
Baud Rate 19200
Data Bits 8
Parity Bits None
Stop Bits 1
Flow Control None
1
2
3
RxD
GND
TxD
3-pin
Terminal Block
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP EL-31SY Bedienungsanleitung
CYP
CYP EL-C81C Bedienungsanleitung
CYP
CYP EL-5400 Bedienungsanleitung
CYP
CYP CH-2537TXM-TB Bedienungsanleitung
CYP
CYP CSC-6030CVE Bedienungsanleitung
CYP
CYP EL-21SY Bedienungsanleitung
CYP
CYP PUV-2608TX Bedienungsanleitung
CYP
CYP CMIR-44 Bedienungsanleitung
CYP
CYP CPRO-U4H1HFS Bedienungsanleitung
CYP
CYP CVSD-41ARN Installationshandbuch
CYP
CYP CPLUS-V4H1H Bedienungsanleitung
CYP
CYP PU-2H8HBTE-AD Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP CLUX-31GAME Bedienungsanleitung
CYP
CYP PU-1H2HBTE Bedienungsanleitung
CYP
CYP AU-D21 Bedienungsanleitung
CYP
CYP OR-HD62CD Bedienungsanleitung
CYP
CYP CED-1M Bedienungsanleitung
CYP
CYP OR-88U-4K22 Bedienungsanleitung
CYP
CYP CLUX-4S2 Bedienungsanleitung
