CYP CPRO-U4H1HFS Bedienungsanleitung
CPRO-U4H1HFS
UHD 4 to 1 HDMI Switcher
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 May 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 25/03/15 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Remote Control................................5
6.4 RS-232 Pin Assignment .....................5
6.5 IP Searching Software Application
and Installation.......................................6
6.6 RS-232 & Telnet Commands............7
6.7 EDID Content....................................9
6.8 Telnet Control .................................10
6.9 WebGUI Control .............................12
7. Connection Diagram .......................... 14
8. Specications ...................................... 15
9. Acronyms ............................................. 17
1
1. INTRODUCTION
The 4 by 1 HDMI Switcher enables the switching of four HDMI sources
to a single HDMI output, allowing a display or AV Receiver to select
between four devices. With fast switching technology the device
can greatly eliminate the time required by swapping or turning ON/
OFF the connected displays. It supports 4K2K, 3D, 36-bit Deep Color,
Hi-Def. lossless audio and other features dened by the latest HDMI
specications. The management of source/sink scenarios can be
operated easily through on-panel buttons, IR remote control, RS-232,
Telnet and WebGUI control.
2. APPLICATIONS
• Home Theater/Entertainment
• Lecture Room/Hall Presentation
• Show Room/Demo Room
• Public Commercial Display
• Information Board
3. PACKAGE CONTENTS
• UHD 4 to 1 HDMI Switcher
• Remote Control with Battery
• IR Receiver Cable
• 5V/2.6A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-
Box and output HDMI TV/Display with connection cables.
2
5. FEATURES
• HDMI (with 3D & 4K2K supported) and HDCP compliant
• Select any one of four HDMI sources and display on a HDTV display
with fast switching between sources
• Supports 3D signals pass-through
• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30, 50/60
YUV_420 & 4096x2160@24, 50/60 YUV_420)
• Supports HDMI data rate from 300Mbps to 3Gbps and 'Deep Color'
up to 1080p/36-bit
• Supports selection of Standard (Fixed) or TV (Downstream) EDID
settings
• Supports Audio pass-through of High-denition Audio formats (LPCM
2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby TrueHD and
DTS-HD Master Audio)
• HDMI inputs support ‘Standard’ and ‘Apple’ HDCP modes.
Selecting ‘Apple’ mode guarantees the compatibility of Apple
devices with this switcher
• Supports Telnet and WebGUI control
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWERSYNCINPUT 1234
UHD 4 TO 1 SWITCHER CPRO-U4H1HFS
1 2 3 4
1IR Window: This IR Receiver receives the remote control signal from
the packaged included remote control only with IR frequency at
38kHz.
2POWER & LED: Press this button to turn ON the device or set the
device to standby mode. The LED will illuminate in green when
switch to ON. This device contains power last memory and
therefore, when the power is connected the device will switch to
ON/Standby according to the last status.
*IP Reset: Press this button together with INPUT button for 3 second
under power ON status, when the LED blink for once it means IP
Reset complete.
3SYNC: This LED will illuminate when both input source and output
display are linked with active signal.
4IN 1~4: Press the INPUT button to select an input from the 4 input
sources, LED will illuminated according to the selection.
4
6.2 Rear Panel
1234
HDMI IN HDMI OUT SERVICECONTROL RS-232IR IN DC 5V
1 65432 7
1HDMI IN: Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending. The device obtain auto detection function
and will detect the last plug-in source for display on output when
it is unplugged, the device will detect rotationally from 1~4 input
source for display on output.
2HDMI OUT: Connect to HDMI TV/display or HD Amplier for output
image and or audio display.
3SERVICE: This slot is reserved for rmware update use only.
4CONTROL: Connect from PC/Laptop with active internet service
for Telnet or WebGUI control with RJ-45 terminated cable.
5RS232: Connect from PC/Laptop for RS-232 command sending to
control the device.
6IR IN: Connect the IR Receiver included in the package for IR
signal receive from the included remote control.
7DC 5V: Connect the adaptor with power cord included in the
package and connect to AC wall outlet for power supply.
5
6.3 Remote Control
1POWER: Press this button to switch ON the
device or to set it to standby mode.
2INPUT: Press 1~4 to select input source.
6.4 RS-232 Pin Assignment
Switcher
Remote Control
PIN Assignment PIN Assignment
1 NC 1 NC
2Tx 2Rx
3Rx 3Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 115200bps
Data Bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
CR-72
POWER
INPUT
34
12
1
2
Inhaltsverzeichnis
Andere CYP Schalten Handbücher
CYP
CYP CSC-5300 Bedienungsanleitung
CYP
CYP EL-31SY Bedienungsanleitung
CYP
CYP DT-21 Bedienungsanleitung
CYP
CYP CPLUS-V4H1H Bedienungsanleitung
CYP
CYP EL-5300 Bedienungsanleitung
CYP
CYP CDPS-41SQN Bedienungsanleitung
CYP
CYP CDPS-U4H4HSA Bedienungsanleitung
CYP
CYP CLUX-41AP Bedienungsanleitung
CYP
CYP CLUX-4S2 Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP CLUX-41W Bedienungsanleitung
CYP
CYP CDPS-U42HPIP Installationshandbuch
CYP
CYP CP-290 Bedienungsanleitung
CYP
CYP CPLUS-V4H1HP Bedienungsanleitung
CYP
CYP EL-42PIP Bedienungsanleitung
CYP
CYP CPRO-3D42S Bedienungsanleitung
CYP
CYP PU-1H2HBTE Bedienungsanleitung
CYP
CYP MA-U42 Bedienungsanleitung
CYP
CYP EL-5600 Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
