Cypress CYALKIT-E03 Handbuch

CYALKIT-E03

Solar-Powered BLE Sensor Beacon 5 Pack

Kit Guide

Doc. No. 002-12543 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

www.cypress.com

Copyrights

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 2

and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or

referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United

States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as

specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property

rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with

Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable

license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code

form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your

organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through

resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents

that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software

solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the

Software is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without

further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in

this document. Any information provided in this document, including any sample design information or programming code, is

provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and

test the functionality and safety of any application made of this information and any resulting product. Cypress products are

not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of

weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems

(including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other

uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”).

A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause

the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you

shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses

of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other

liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB,

F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a

more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their

respective owners.

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 3

Contents

Safety Information..................................................................................................................................................................4

Regulatory Compliance ...................................................................................................................................................4

General Safety Instructions .............................................................................................................................................5

1. Introduction....................................................................................................................................................................6

1.1 Kit Introduction.......................................................................................................................................................6

1.2 Block Diagrams .....................................................................................................................................................7

1.3 Features ................................................................................................................................................................7

2. Getting Started...............................................................................................................................................................9

2.1 WSN Operation with PC........................................................................................................................................9

2.2 WSN Operation with a Mobile Device..................................................................................................................10

3. Hardware......................................................................................................................................................................14

3.1 Solar BLE Sensor................................................................................................................................................14

4. Enclosure.....................................................................................................................................................................16

4.1 Solar BLE Sensor Enclosure...............................................................................................................................16

4.2 How to Install the Board in the Enclosure............................................................................................................17

Revision History...................................................................................................................................................................19

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 4

Safety Information

Regulatory Compliance

The CYALKIT-E03 Solar-Powered Bluetooth Low Energy (BLE) Sensor Beacon 5 Pack is intended for use as a development

platform for hardware or software in a laboratory environment. The board is an open system design, which does not include a

shielded enclosure. This may cause interference with other electrical or electronic devices in close proximity. In a domestic

environment, this product may cause radio interference. In this case, the user may be required to take adequate preventive

measures. Also, the board should not be used near any medical equipment or RF devices.

Attaching additional wiring to this product or modifying the product operation from the factory default may affect its

performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable

mitigating measures should be taken.

The CYALKIT-E03Solar-Powered BLESensor Beacon 5 Pack as shipped from the factory has been verified

to meet the requirements of CE as a Class A product.

The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack contains electrostatic discharge

(ESD) sensitive devices. Electrostatic charges readily accumulate on the human body and any

equipment and can discharge without detection. Permanent damage may occur to devices

subjected to high-energy discharges. Proper ESD precautions are recommended to avoid

performance degradation or loss of functionality. Store unused CYALKIT-E03 boards in the

protective shipping package.

End of Life/Product Recycling

The end of life of this kit is five years after the date of manufacture mentioned on the back of the

box. Contact your nearest recycler to discard the kit.

Safety Information

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 5

General Safety Instructions

ESD Protection

ESD can damage boards and their associated components. Cypress recommends that you perform procedures only at an

ESD workstation. If one is not available, use appropriate ESD protection by wearing an antistatic wrist strap attached to

chassis ground (any unpainted metal surface) on your board when handling parts.

Handling Boards

CYALKIT-E03 boards are sensitive to ESD. Hold the board only by its edges. After removing the board from its box, place it on

a grounded, static-free surface. Use a conductive foam pad, if available. Do not slide the board over any surface.

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 6

1. Introduction

Thank you foryour interestin the CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack. The Solar-Powered BLE Sensor

Beacon 5 Pack is an expansion pack for CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK. It provides an easy-to-use

platform for the development of a tiny solar-powered IoT device with BLE wireless connectivity. The CYALKIT-E03 consists of

five Solar BLE Sensors. The Solar BLE Sensor is based on Cypress’s energy-harvesting power management IC (PMIC)

S6AE103A, and EZ-BLE products. The objective of this CYALKIT-E03 is to provide a fully functional battery-less wireless

sensor node (WSN). The Solar BLE Sensor will be enclosed in a casing to automatically transmit temperature and humidity

sensor data in an office lighting environment. Each beacon can be placed in a very small remote location due to its size and

battery-free operation. The sensor data is transmitted to a BLE device and sent to the cloud for analysis.

This kit guide explains how to set up and use the CYALKIT-E03. Be sure to read it before using the product. For questions,

please consult with sales or support representatives.

Note: All information included in this document is current as of the date it was issued. Such information is subject to change

without any prior notice. Please confirm the latest relevant information with the sales representative.

1.1 Kit Introduction

Figure 1-1. Kit Contents

1 To program, debug, and set the parameters on Solar BLE Sensor, you need at least one Debug Board (Not included in the package) that is

included in CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK.

1. Five Solar-Powered BLE Sensor Beacons (Solar BLE Sensor)1

- Board + Enclosure

2. Quick Start Guide

＋

x 5 pcs

Introduction

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 7

1.2 Block Diagrams

Figure 1-2. Block Diagram of Solar BLE Sensor

PC based on Windows 7/8.1/10

iOS 8 or newer

Android 4.4 or newer

1.3 Features

The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack provides everything needed to develop a light-powered

sensor node that transmits sensor data using Bluetooth Low Energy (BLE):

Tiny solar-powered BLE sensor board (circle with 24-mm diameter, same size as 25-cent coin)

Operates using light energy harvested (>100 lux) by the included solar cell

Supports BLE communication with a mobile device (iOS 8 or newer/Android 4.4 or newer)

Energy harvesting PMIC S6AE103A that supports the following applications:

□Demo mode, transmitting sensor data at 3- to 60-second intervals (without charging to a supercapacitor)

□Timer mode, transmitting sensor data at 5-minute intervals while charging to the supercapacitor

□Transmitting data at over 30 hours without ambient light (when mode is set to Timer mode and supercapacitor is

fully charged)

Solar BLE Sensor that can support the following:

□Selection of mode using a slide switch (Demo or Timer mode)

□Programming and debugging of the EZ-BLE module via Debug Board

□Parameter setting of BLE Beacon via Debug Board

□Charging of surplus solar energy to a 0.2-F supercapacitor (Timer mode)

Introduction

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 8

□Charging of supercapacitor via Debug Board using USB bus power

□Temperature and humidity digital sensor

□Expandable interface via 10-pin connector (GPIO)

□Test pads for power, ground, primary battery input, and SWD interface for programming

Uses the following Cypress devices:

□S6AE103A ultra-low-power energy harvesting PMIC

□CYBLE-022001-00 EZ-BLE PRoC module

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 9

2. Getting Started

In this chapter, you will become familiar with the Solar-Powered BLE Sensor Beacon 5 Pack by successfully establishing a

BLE sensor beacon connection between the Solar BLE Sensor operating as a wireless sensor network (WSN), a mobile

device with apps. This will also confirm that the Solar BLE Sensor and your mobile device are operating properly.

2.1 WSN Operation with PC

In this section, you will confirm that the Solar BLE Sensors is operating as a WSN by using the software provided on your

mobile device to detect temperature and humidity changes.

2.1.1 Establishing BLE Connection

1. Set the slide switch (SW1) on the five Solar BLE Sensors to Demo mode (DM). The mode is set to Demo Mode from the

factory setting. Refer to CYALKIT-E02 Kit Guide for detailed information on each mode.

Note: Use the sharp end of something like tweezers (not included in the kit) to change the mode.

2. Each Solar BLE Sensors are numbered with the IDs (#2 to #6) on the bottom side of the enclosure from the factory.

Refer to CYALKIT-E02 Kit Guide for information on how to change the ID.

Demo Mode

(DM)

Timer Mode

(TM)

SW1

Enclosure

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A 10

3. Place the five Solar BLE Sensors under an office light. After placing the Solar BLE Sensors under a suitable light (refer

to Table 2-1. Light Level Versus Time Interval), it will automatically power up and begin transmitting.

Table 2-1. Light Level Versus Time Interval

Typical Light Level

Environment

Time Interval of Sensor1

~1 lx

Moonlight

Does not work

100 lx~200 lx

Under street lighting

50 s ~

200 lx~400 lx

At museum

30 s ~ 50 s

400 lx~500 lx

Office lighting

15 s ~ 30 s

1000 lx ~

Shopping mall, rainy day

3 s ~ 15 s

1The time interval of the sensor will be three seconds in all light levels when the supercapacitor on the Solar BLE Sensor is fully charged.

2.2 WSN Operation with a Mobile Device

In this section, you will confirm that the Solar BLE Sensors are operating as a WSN by using the apps on your mobile device

to detect temperature and humidity changes.

2.2.1 Mobile Apps Installation

The Cypress BLE-Beacon app is available on Google Play and in the Apple Store for free. To install the app, follow these

instructions.

2.2.1.1 Installing the Android App

1. Open Google Play and search for “Cypress BLE-Beacon”.

Inhaltsverzeichnis

Andere Cypress Mikrocontroller Handbücher

Cypress

Cypress SPANSION FM4 MB9BF568 Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-046 Bedienungsanleitung

Cypress

Cypress CY3643 Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-062-WiFi-BT Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-048 Bedienungsanleitung

Cypress

Cypress CY3274 Bedienungsanleitung

Cypress

Cypress PSOC CY8CKIT-146 Bedienungsanleitung

Cypress

Cypress CY3641 Bedienungsanleitung

Cypress

Cypress CY3664-EXT Bedienungsanleitung

Cypress

Cypress MB95310L Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit Bedienungsanleitung

Cypress

Cypress CapSense Plus CY3280-CPM1 Bedienungsanleitung

Cypress

Cypress CY8CKIT-030 Bedienungsanleitung

Cypress

Cypress CY15FRAMKIT-002 Bedienungsanleitung

Cypress

Cypress CY8CKIT-042 Bedienungsanleitung

Cypress

Cypress PSoC 4000 Series Gebrauchs- und Pflegehandbuch

Cypress

Cypress FM4 Series Bedienungsanleitung

Cypress

Cypress CY3652 Bedienungsanleitung

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-003 Bedienungsanleitung

Cypress

Cypress PSoC 4 M Series Bedienungsanleitung

Cypress

Cypress Traveo II Bedienungsanleitung

Cypress

Cypress EZ-PD CY4502 Bedienungsanleitung

Cypress

Cypress S6E2DH series Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung