Cypress MB90910 Series Bedienungsanleitung

MB90911AS/F912BS/V950AMAS

F2MC-16LX MB90910 Series

16-bit Microcontroller

Cypress Semiconductor Corporation • 198 Champion Court • San Jose,CA 95134-1709 • 408-943-2600

Document Number: 002-04578 Rev. *A Revised April 12, 2016

The MB90910 series, loaded 1 channel FULL-CAN controller and Flash ROM, is general-purpose Cypress 16-bit microcontroller

designing for automotive and industrial applications. Its main feature is the on-board CAN controllers, which conform to Ver 2.0 Part

A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal FULL-CAN

approach. With the new 0.18m CMOS technology, Cypress now offers on-chip Flash ROM program memory up to 128 Kbytes.

The power supply (1.8 V) is supplied to the MCU core from an internal regulator circuit. This creates a major advantage in terms of

EMI and power consumption.

The internal PLL clock frequency multiplier provides an internal 31.25 ns instruction execution time from an external 4 MHz clock.

The unit features a 4-channel input capture unit 1 channel 16-bit free-run timer, 2-channel LIN-UART,

1-channel UART, and 16-channel 8/10-bit A/D converter as the peripheral resource.

Features

Clock

■Built-in PLL clock frequency multiplication circuit

■Selection of machine clocks (PLL clocks) is allowed among

frequency division by 2 on oscillation clock and multiplication

of 1 to 8 times of oscillation clock (for 4 MHz oscillation clock,

4 MHz to 32 MHz)

■Minimum execution time of instruction : 31.25 ns (when

operating with 4-MHz oscillation clock and 8-time multiplied

PLL clock)

Instruction system best suited to controller

■16 Mbytes CPU memory space

■24-bit internal addressing

■Wide choice of data types (bit, byte, word, and long word)

■Wide choice of addressing modes (23 types)

■Enhanced multiply-divide instructions with sign and RETI

instructions

■Enhanced high-precision computing with 32-bit accumulator

Instruction system compatible with high-level

language (C language) and multitask

■Employing system stack pointer

■Enhanced various pointer indirect instructions

■Barrel shift instructions

Increased processing speed

4-byte instruction queue

Powerful interrupt function

■Powerful 8-level, 34-condition interrupt feature

■Up to 8 channels external interrupts are supported

CPU-independent automatic data transfer func-

tion

Expanded intelligent I/O service function (EI2OS) : up to 16

channels

Low power consumption (standby) mode

■Sleep mode (a mode that halts CPU operating clock)

■Main timer mode (timebase timer mode that is transferred

from main clock mode)

■PLL timer mode (timebase timer mode that is transferred from

PLL clock mode)

■Stop mode (a mode that stops oscillation clock)

■CPU blocking operation mode

Process

CMOS technology

I/O port

General purpose input/output port (CMOS output) :

- 36 ports

Timer

■Timebase timer, watchdog timer : 1 channel

■8/16-bit PPG timer : 8-bit 6 channels or 16-bit 3 channels

■16-bit reload timer : 2 channels

■16- bit input/output timer

❐-16-bit free-run timer : 1 channel (FRT0 : ICU 0/1/2/3)

❐-16- bit input capture : (ICU) : 4 channels

FULL-CAN controller : 1 channel

■Compliant with CAN specifications Version 2.0 Part A and B

■16 message buffers are built in

■CAN wake-up function

UART (LIN/SCI) : LIN-UART2 channels, UART

1 channel

■Equipped with full-duplex double buffer

■Clock-asynchronous or clock-synchronous serial trans-

mission is available

Document Number: 002-04578 Rev. *A Page 2 of 64

MB90910 Series

DTP/External interrupt : up to 8 channels, CAN

wakeup : up to 1 channel

Module for activation of expanded intelligent I/O service (EI2OS)

and generation of external interrupt by external input

Delay interrupt generator module

Generates interrupt request for task switching

8/10-bit A/D converter : 16 channels

■Resolution is selectable between 8-bit and 10-bit

■Activation by external trigger input is allowed

■Conversion time : 3 s (at 24 MHz machine clock, including

sampling time)

Program patch function

Address matching detection for 6 address pointers

Capable of changing input voltage for port

Automotive/CMOS-Schmitt input level (initial level is Automotive

in single-chip mode)

ROM security function

The content of ROM can be protected (Only MASK ROM

product).

Flash memory security function

Protects the content of Flash memory

Document Number: 002-04578 Rev. *A Page 3 of 64

MB90910 Series

Contents

Product Lineup ................................................................ 4

Pin Assignment ................................................................ 6

Pin Description ................................................................. 7

I/O Circuit Type .............................................................. 10

Handling Devices ............................................................ 15

Block Diagrams .............................................................. 18

Memory Map .................................................................... 20

I/O Map ............................................................................. 21

CAN Controllers .............................................................. 29

Interrupt Factors, Interrupt Vectors,

Interrupt Control Register .............................................. 36

Electrical Characteristics ............................................... 38

Absolute Maximum Ratings ....................................... 38

Recommended Conditions ........................................ 40

DC Characteristics .................................................... 41

AC Characteristics ..................................................... 43

Clock Timing .............................................................. 43

Reset Standby Input .................................................. 45

Power-on Reset ......................................................... 46

UART ......................................................................... 46

Trigger Input Timing .................................................. 51

Timer Related Resource Input Timing ....................... 52

Timer Related Resource Output Timing .................... 52

CAN PLL cycle jitter .................................................. 53

A/D Converter ............................................................ 54

Definition of A/D Converter Terms ........................... 56

Flash Memory Program/Erase Characteristics ......... 59

Ordering Information ..................................................... 60

Package Dimension ........................................................ 61

Major Changes .................................................................62

Document Number: 002-04578 Rev. *A Page 4 of 64

MB90910 Series

1. Product Lineup

(Continued)

Part number

Parameter

MB90V950AMAS MB90F912BS MB90911AS

Type Evaluation product Flash memory product MASK ROM product

CPU F2MC-16LX CPU

System clock On-chip PLL clock multiplier (1, 2, 3, 4, 6, 8, 1/2 when PLL stops)

Minimum instruction execution time : 31.25 ns (4 MHz osc. PLL 8)

ROM External 128 Kbytes 64 Kbytes

RAM 30 Kbytes 8 Kbytes 4 Kbytes

Emulator-specific

power supply*1Yes 

FPGA data*2Rev 050617 

Adaptor board*2MB2147-20 Rev.04C or later 

Technology 0.35 m CMOS with built-in power

supply regulator 0.18 m CMOS with built-in power supply regulator

Operation voltage range 5 V 10 3.0 V to 5.5 V : When normal operating

Operating ambient tem-

perature 40 °C to 105 °C

Package PGA-299 LQFP-48

UART

LIN-UART 7 channels LIN-UART 2 channels, UART 1 channel

Wide range of baud rate settings using a dedicated reload timer

Special synchronous options for adapting to different synchronous serial protocols

LIN functionality working either as master or slave LIN device (Supported by LIN-UART only)

I2C (400 kbps) 2 channels 

A/D converter

24 input channels 16 input channels

10-bit or 8-bit resolution

Conversion time : Min 3 s include sample time (per one channel)

16-bit

Reload timer

4 channels 2 channels

Operation clock frequency : fsys/21, fsys/23, fsys/25(fsys Machine clock frequency)

Supports External Event Count function

16-bit

I/O timer

2 channels 1 channel

Generates an interrupt signal on overflow

Operation clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24, fsys/25, fsys/26, fsys/27

(fsys Machine clock freq.)

I/O Timer 0 (clock input FRCK0) corresponds to ICU0/1/2/3, OCU 0/1/2/3

I/O Timer 1 (clock input FRCK1) corresponds to ICU4/5/6/7, OCU 4/5/6/7

16-bit

Output compare

8 channels 

Generates an interrupt signal when one of the 16-bit I/O timer matches the output compare register

A pair of compare registers can be used to generate an output signal.

Document Number: 002-04578 Rev. *A Page 5 of 64

MB90910 Series

(Continued)

*1: It is setting of Jumper switch (TOOL VCC) when emulator (MB2147-01) is used. Please refer to the Emulator hardware manual

for the details.

*2: Contact the sales or support representative if using other than those above of FPGA data and adaptor boards.

Part number

Parameter

MB90V950AMAS MB90F912BS MB90911AS

16-bit

Input capture

8 channels 4 channels

Rising edge, falling edge or rising & falling edge sensitive

Signals an interrupt upon external event

8/16-bit

PPG

8 channels (16-bit) /16 channels

(8-bit)

Sixteen 8-bit reload counters

Sixteen 8-bit reload registers for L

pulse width

Sixteen 8-bit reload registers for H

pulse width

3 channels (16-bit) /6 channels (8-bit)

Six 8-bit reload counters

Six 8-bit reload registers for L pulse width

Six 8-bit reload registers for H pulse width

Supports 8-bit and 16-bit operation modes

A pair of 8-bit reload counters can be configured as one 16-bit reload counter or as

8-bit prescaler plus 8-bit reload counter

Operating clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24or 128 s@fosc 4 MHz

(fsys Machine clock frequency, fosc Oscillation clock frequency)

CAN

controller

3 channels 1 channel

Conforms to CAN Specification Version 2.0 Part A and B

Automatic re-transmission in case of error

Automatic transmission in response to Remote Frames

Prioritized 16 message buffers for data and ID’s

Supports multiple messages

Flexible configuration of acceptance filtering :

Full bit compare/Full bit mask/Two partial bit masks

Supports up to 1 Mbps

DTP/External

interrupt

(8 channels)

Can be used rising edge, falling edge, starting up by H/L level input, external interrupt,

expanded intelligent I/O services (EI2OS)

D/A Converter 8-bit 2 channels 

I/O Ports

Virtually all external pins can be used as general purpose I/O port

All ports are push-pull outputs

Bit-wise settable as input/output or peripheral signal

Can be configured 8 as CMOS schmitt trigger/ automotive inputs (in blocks of 8 pins)

TTL input level settable for external bus (32-pin only for external bus)

Flash memory

(Flash memory product

only)

Supports automatic programming, Embedded Algorithm

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Boot block configuration

Erase can be performed on each block

Flash Security

Document Number: 002-04578 Rev. *A Page 6 of 64

MB90910 Series

2. Pin Assignment

■MB90F912BS, MB90911AS

(TOP VIEW)

(FPT-48P-M26)

P66/AN6/PPGC(D)

AVss

RST

Vcc

Vss

P40

P41

P82/SIN0/INT14R/TIN2

P50/AN8/SIN2

AVcc

P44/FRCK0

P80/ADTG/INT12R

P51/AN9/SOT2

P67/AN7/PPGE(F)

AVR

P60/AN0

P61/AN1

P62/AN2

P63/AN3

P64/AN4

P65/AN5/PPGA(B) P27/IN3

P26/IN2

P25/IN1

P24/IN0

P23/PPGF(E)*

P22/PPGD(C)*

P21/PPGB(A)*

P20*

MD2

MD1

MD0

P52/AN10/SCK2

P53/AN11/TIN3

P54/AN12/TOT3/INT8

P55/AN13/INT10

P56/AN14/INT11

P57/AN15/INT13

P84/SCK0/INT15R

P83/SOT0/TOT2

P42/RX1/INT9R

P43/TX1

P86/SOT1

P87/SCK1

P85/SIN1

LQFP-48

* : High current output port

Document Number: 002-04578 Rev. *A Page 7 of 64

MB90910 Series

3. Pin Description

(Continued)

Pin No. Pin name I/O circuit type* Function

1AV

CC IV

CC power input pin for analog circuit.

2 AVR Power (Vref) input pin for A/D converter.

It should be below VCC.

3 to 7

P60 to P64

General-purpose I/O port.

AN0 to AN4 Analog input pins for A/D converter.

8 to 10

P65 to P67

General-purpose I/O port.

AN5 to AN7 Analog input pins for A/D converter.

PPGA (B) ,

PPGC (D) ,

PPGE (F)

Output pins for PPG.

P80

General-purpose I/O port.

ADTG Trigger input pin for A/D converter.

INT12R External interrupt request input pin for INT12R.

P50

General-purpose I/O port.

AN8 Analog input pin for A/D converter.

SIN2 Serial data input pin for UART2.

P51

General-purpose I/O port.

AN9 Analog input pin for A/D converter.

SOT2 Serial data output pin for UART2.

P52

General-purpose I/O port.

AN10 Analog input pin for A/D converter.

SCK2 Clock I/O pin for UART2.

P53

General-purpose I/O port.

AN11 Analog input pin for A/D converter.

TIN3 Event input pin for reload timer 3.

P54

General-purpose I/O port.

AN12 Analog input pin for A/D converter.

TOT3 Output pin for reload timer 3

INT8 External interrupt request input pin for INT8.

P55

General-purpose I/O port.

AN13 Analog input pin for A/D converter.

INT10 External interrupt request input pin for INT10.

Document Number: 002-04578 Rev. *A Page 8 of 64

MB90910 Series

(Continued)

Pin No. Pin name I/O circuit

type* Function

P56

General-purpose I/O port

(Different I/O circuit type from MB90V950AMAS).

AN14 Analog input pin for A/D converter.

INT11 External interrupt request input pin for INT11.

P57

General-purpose I/O port

(Different I/O circuit type from MB90V950AMAS).

AN15 Analog input pin for A/D converter.

INT13 External interrupt request input pin for INT13.

20 MD2 D Input pin for operation mode specification.

21, 22 MD1,

MD0 C Input pins for operation mode specification.

23 RST E Reset input pin.

24 VCC Power input pin (3.5 V to 5.5 V) .

25 VSS Power input pin (0 V) .

26 C I Power supply stabilization capacitor pin. It should be connected to a higher

than or equal to 0.1 F ceramic condenser.

27 X0

Oscillation input pin.

28 X1 Oscillation output pin.

29 to 32

P27 to P24

General-purpose I/O port.

The register can be set to select whether to use a pull-up

resistor. This function is enabled in single-chip mode.

IN3 to IN0 Event input pins for input capture 0 to 3.

33 to 35

P23 to P21

General-purpose I/O port.

The register can be set to select whether to use a pull-up

resistor. This function is enabled in single-chip mode.

High current output port

(Different I/O circuit type from MB90V950AMAS).

PPGF (E) , PPGD

PPGB(A)

Output pins for PPG.

36 P20 J

General-purpose I/O port.

The register can be set to select whether to use a pull-up

resistor. This function is enabled in single-chip mode.

High current output port

(Different I/O circuit type from MB90V950AMAS).

P85

General-purpose I/O port.

SIN1 Serial data input pin for UART1.

P87

General-purpose I/O port.

SCK1 Clock I/O pin for UART1.

P86

General-purpose I/O port.

SOT1 Serial data output pin for UART1.

Document Number: 002-04578 Rev. *A Page 9 of 64

MB90910 Series

(Continued)

* : For the I/O circuit type, refer to “I/O Circuit Type”.

Pin No. Pin name I/O circuit

type* Function

P43

General-purpose I/O port.

TX1 TX output pin for CAN1 controller.

P42

General-purpose I/O port.

RX1 RX input pin for CAN1 controller.

INT9R External interrupt request input pin for INT9R.

P83

General-purpose I/O port.

SOT0 Serial data output pin for UART0.

TOT2 Output pin for reload timer 2.

P84

General-purpose I/O port.

SCK0 Clock I/O pin for UART0.

INT15R External interrupt request input pin for INT15R.

P82

General-purpose I/O port.

SIN0 Serial data input pin for UART0.

INT14R External interrupt request input pin for INT14R.

TIN2 Event input pin for reload timer 2.

P44

General-purpose I/O port

(Different I/O circuit type from MB90V950AMAS).

FRCK0 Free-run timer 0 clock input pin.

46, 47 P40, P41 F General-purpose I/O port

48 AVSS IV

SS power input pin for analog circuit.

Document Number: 002-04578 Rev. *A Page 10 of 64

MB90910 Series

4. I/O Circuit Type

Type Circuit Remarks

AOscillation circuit :

High-speed oscillation feedback

resistor approx. 1 M

(MASK ROM product, Flash memory product)

Oscillation circuit :

High-speed oscillation feedback

resistor approx. 1 M

(Evaluation product)

BUnused

C• MASK ROM product / Evaluation

product :

CMOS hysteresis input pin

• Flash memory product :

CMOS input pin

D• MASK ROM product / Evaluation

product :

CMOS hysteresis input pin

• Flash memory product :

- CMOS input pin

- No Pull-down

Xout

Standby control signal

Xout

Standby control signal

X1A

X0A

Xout

CMOS hysteresis

inputs

Pull-down

resistor

CMOShysteresis

inputs

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cypress Mikrocontroller Handbücher

Cypress

Cypress FM0+ S6E1C SERIES Bedienungsanleitung

Cypress

Cypress Perform PSOC 5LP PROTOTYPING KIT Bedienungsanleitung

Cypress

Cypress FM4-U120-9B560 Bedienungsanleitung

Cypress

Cypress EZ-PD CY4502 Bedienungsanleitung

Cypress

Cypress CY8CPROTO-062S3-4343W Bedienungsanleitung

Cypress

Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit Bedienungsanleitung

Cypress

Cypress MB95580H Series Bedienungsanleitung

Cypress

Cypress WirelessUSB CY3635 N:1 Bedienungsanleitung

Cypress

Cypress MB9BF568R Series Bedienungsanleitung

Cypress

Cypress CY3652 Bedienungsanleitung

Cypress

Cypress SPANSION FM4 MB9BF568 Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-062-BLE Bedienungsanleitung

Cypress

Cypress CY3641 Bedienungsanleitung

Cypress

Cypress PSoC 6 MCU Installationsanleitung

Cypress

Cypress EZ-USB NX2LP-Flex CY3686 Bedienungsanleitung

Cypress

Cypress CY8CKIT-001 Handbuch

Cypress

Cypress S6J3200 Series Betriebsanleitung

Cypress

Cypress CY15FRAMKIT-002 Bedienungsanleitung

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-001 Bedienungsanleitung

Cypress

Cypress MB95310L Series Bedienungsanleitung

Cypress

Cypress PSoC CapSense Bedienungsanleitung

Cypress

Cypress CY4608 Bedienungs- und Wartungsanleitung

Cypress

Cypress PSoC Bedienungsanleitung

Cypress

Cypress PSoC 3 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung