D-Link DGE-660TD Bedienungsanleitung
D-Link DGE-660TD User Manual ii
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. All other company or product names mentioned herein are trademarks or registered
trademarks of their respective companies.
Copyright © 2007 by D-Link Systems, Inc.
All rights reserved.This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
Revision Date Description
1.0 May 1, 2006 DGE-660TD Revision A1/A2
1.1 August 14, 2007 Added Windows Vista™support
Preface
D-Link DGE-660TD User Manual iii
Table of Contents
Preface..........................................................................ii
Manual Revisions .................................................... ii
Trademarks .............................................................. ii
Product Overview ........................................................1
Package Contents....................................................2
System Requirements .............................................2
Features................................................................... 3
Hardware Overview .................................................4
Connections and LEDs ......................................4
Installation....................................................................5
Install the Drivers.....................................................5
Insert the Adapter .................................................... 6
Finishing the Installation ..........................................7
Windows Vista™Users .......................................7
Windows®XP Users........................................... 7
Windows®2000 Users ....................................... 7
Verify Installation...................................................... 8
Configuration...............................................................9
Configure your Adapter............................................9
Troubleshooting.........................................................12
Networking Basics .................................................... 15
About Gigabit Ethernet .......................................... 15
About Auto-negotiation .......................................... 15
Technical Specifications...........................................17
Technical Support .....................................................18
Warranty ..................................................................... 19
Registration................................................................25
D-Link DGE-660TD User Manual 1
Thank you for choosing the D-Link DGE-660TD, the value leader among Fast Ethernet/Gigabit Ethernet adapters for notebook PCs.
This chapter provides a general description of DGE-660TD features, with a summary of features at the end of the chapter. Installation
instructions are provided in sections 2 and 3.
The D-Link DGE-660TD Gigabit Cardbus PC Card for notebook PCs is a credit-card sized Gigabit adapter for connecting a notebook PC
to an Ethernet, Fast Ethernet, or Gigabit network. The notebook PC must be equipped with a Type II Cardbus compliant slot.
NOTE: The terms “PC Card” is used throughout this manual to refer to those objects as defined in the PCMCIA / PC Card standards
published by Personal Computer Memory Card Industry Association (PCMCIA). The term “slot,” as used in this manual, is synonymous
with “socket” where the standards use the latter term in reference to the physical receptacles of a host notebook computer, for insertion/
connection of PC Cards. More information on the standards is available from PCMCIA’s www server at http://www.pc-card.com.
The D-Link DGE-660TD automatically detects the parameters of its Ethernet environment, and automatically negotiates and determines
its own speed and duplex settings as required for maximum performance within the environment. (The auto-negotiation function is effective
only when the DGE-660TD is connected to the network by a device (switch or hub) that also has autonegotiation functionality.)
Inside its compact case, the D-Link DGE-660TD holds an Ethernet controller, network processing interface, a 68-pin PC Card Standard
front-end plug, which connects to the notebook PC, and a direct port for connecting a RJ-45 network cable. The DGE-660TD requires no
pre-installation setup -- simply insert its front end into the notebook PC’s PC-Card slot.
The DGE-660TD is supplied with an RJ-45 receptacle, which receives the network cable. The direct port features full LED display for
linkage and activity states, speed, transmitting and receiving data, and carrier detection.
Product Overview
D-Link DGE-660TD User Manual 2
Minimum System
Requirements
Notebook Computer with the following:
• Windows®2000/XP/Vista™operating system
• Pentium 150MHz or Faster
• 64MB RAM
• 32MB Free Hard Drive Space
• One Available CardBus Slot
• CD-ROM Drive
System Requirements
D-Link DGE-660TD Gigabit
Cardbus Adapter
CD-ROM
Package Contents
D-Link DGE-660TD User Manual 3
Features of the DGE-660TD Gigabit Cardbus PC Card:
• Complies with IEEE 802.3 10BASE-T Ethernet standard
• Complies with IEEE 802.3u 100BASE-TX Fast Ethernet standard
• Complies with IEEE 802.3ab 1000BASE-T Gigabit Ethernet standard
• Complies with ANSI / IEEE 802.3 Auto-Negitiation standard
• Complies with 32-bit CardBus Standard
• Supports Crossover Detection & Auto-Correction
• Built-in Transmit/Receive FIFO data buffer (8K/64K)
• No manual setup switches -- automatically configured by software
• Low power consumption
Supported driver list:
• Microsoft Windows Vista™
• Microsoft Windows®XP
• Microsoft Windows®2000
• Microsoft Network Client for DOS (NDIS 2 driver)
• NetWare Client for DOS (ODI driver)
Features
D-Link DGE-660TD User Manual 4
Hardware Overview
Connections and LEDs
Ethernet Port
Link/Activity
This indicator lights green when the
RJ-45 port is connected to an Ethernet
network, if the indicator is blinking
green it is transmitting/receiving data
to/from the Ethernet network.
Speed Indicator
The indicator lights green when the port is
connected to a 1000Mbps Gigabit Ethernet
Network and the indicator lights amber when
the port is connected to a 100Mbps Fast
Ethernet Network. Otherwise, this indicator
remains off when the port is connected to a
10Mbps Ethernet Network.
D-Link DGE-660TD User Manual 5
• With your computer ON, insert the Driver CD of the DGE-660TD into your CD-ROM Drive.
• The Autorun Screen will appear as shown here.
• Select “Install Drivers” to install the drivers onto your computer.
• After a few moments, the “Install Finish” screen will appear. Click “OK”.
• Select “Yes,” if you are prompted to restart your computer. Restart the computer manually if the prompt does not occur.
(Go to Start > Shut down > Restart.)
Install the Drivers
D-Link DGE-660TD User Manual 6
• Insert the DGE-660TD into the Cardbus slot of your laptop.
• Gently insert the front end of the DGE-660TD into the Cardbus slot on your laptop until it is firmly seated. Make sure that the card is
face-up, as shown. Do not force the insertion.
• Connect an Ethernet Cable (CAT5) from a switch or hub to the DGE-660TD.
This section refers to all users, regardless of which operating system you use.
NOTE: You must first install the drivers as explained in Section 1. If you have not done this and you have inserted the
DGE-660TD into the Cardbus slot, you will need to cancel the New Hardware Wizard, and start over at the beginning of this
installation guide.
Insert the Adapter
D-Link DGE-660TD User Manual 7
Finishing the Installation
To complete the installation of the DGE-660TD:
• Make sure that the DGE-660TD CD-ROM is inserted in the CD-ROM drive
• The DGE-660TD is inserted into your laptop
• The laptop is turned ON
• See the section below that corresponds to your Operating System to complete the installation:
Windows Vista™Users
Windows Vista™completes the installation of the DGE-660TD automatically. A “Installing device driver software” will appear in the task bar
to indicate that the installation is in progress.
Windows®XP Users
Windows®XP completes the installation of the DGE-660TD automatically. A “Found New Hardware” message will appear in the task bar
to indicate that the installation is complete.
Windows®2000 Users
Windows®2000 completes the installation of the DGE-660TD automatically. When the “hour glass” disappears, the installation is
complete.
Andere Handbücher für DGE-660TD
3
Inhaltsverzeichnis
Andere D-Link Adapter Handbücher
D-Link
D-Link DCF-650W - Air Wireless CompactFlash Cf 802.11B... Bedienungsanleitung
D-Link
D-Link DFE-528TX Bedienungsanleitung
D-Link
D-Link DFE-530TX+ Bedienungsanleitung
D-Link
D-Link Express EtherNetwork DNS-120 Bedienungsanleitung
D-Link
D-Link Air DWL-120 Bedienungsanleitung
D-Link
D-Link Air DWL-120 Bedienungsanleitung
D-Link
D-Link PowerLine DHP-302 Bedienungsanleitung
D-Link
D-Link AirPlus Xtreme G WUA-2340 Bedienungsanleitung
D-Link
D-Link Vectra VL410 Bedienungsanleitung
D-Link
D-Link DHP-308AV Bedienungsanleitung
D-Link
D-Link RANGEBOOSTER G WUA-2340 Bedienungsanleitung
D-Link
D-Link D DFE-550FX DFE-550FX Bedienungsanleitung
D-Link
D-Link DGE-530T Bedienungsanleitung
D-Link
D-Link DWL-P100 Bedienungsanleitung
D-Link
D-Link DVG-2001S Bedienungsanleitung
D-Link
D-Link Express EtherNetwork DNS-120 Bedienungsanleitung
D-Link
D-Link AirPlus XTREME G DWL-G132 Bedienungsanleitung
D-Link
D-Link DWL-P50 Bedienungsanleitung
D-Link
D-Link AirPlus G DWL-G510 Bedienerhandbuch
D-Link
D-Link DWL-500 - 11Mb Wireless LAN PCI Network Card Bedienungsanleitung
