D-Link DWM-221 Bedienungsanleitung
DWM-221
User Manual
2014/07/07
Ver. 1.00(EU)
Index
LTE USB Adapter Introduction .......................................2
Internet service ..............................................................5
SMS service ....................................................................6
Contacts .......................................................................10
USSD.............................................................................13
STATISTICS....................................................................14
Settings ........................................................................15
FAQs .............................................................................19
Technical Specifications ...............................................20
LTE USB ADAPTER INTRODUCTION
1. To launch the Network Connect, double-click the shortcut icon
on the desktop. It should be noted that:
If the PIN code enabled, enter the correct one, then click OK.
The (U)SIM will be locked after three retries of incorrect PIN
code inputting;
Enter the correct PUK to retrieve the default PIN code. After
ten retries of incorrect PUK code inputting, please contact with
your service provider;
With the wrong PIN and PUK, all the network services are
unavailable.
2. Main interface introduction
: Connection
: Access to the Text Message
: Access to the Phonebook interface
: Access to USSD
: Access to check usage statistics
: Set parameters options
: Help (User Manual)
3. Status information
Status Description
New message New message(s) arrived.
Message full Indicates the (U)SIM’s storage of SMS
No device Indicates that system cannot find the
device.
Initializing Indicates that the device is in the process
Searching The device is searching for the network.
No service No suitable network.
No (U)SIM card (U)SIM card not inserted or the device
Invalid (U)SIM card The (U)SIM is out of service.
Network signal
Indicate the signal strength of
Network type
GSM/GPRS, UMTS, LTE
Data service
EDGE available, HSPA
4. LED Indicator description
State of LED indicator Description
RED Solid On No SIM card/ Error
Green Solid On Register to network (not connect)
Green blinking Connected to network
*Green blinking: Flash once every 0.5 seconds)
INTERNET SERVICE
1. Connecting with the default connection profile
Click to set up the connection;
2. Statistics information
The following window will be displayed at lower right corner of
main interface when connecting to the internet.
3. Disconnect from the internet
Click to disconnect the internet
connection.
SMS SERVICE
Click to enter SMS (Short Message Service) service interface.
1. Creating and sending a message.
Click :
Input the recipient number by one of the following
options:
Enter the number directly;
Click Send to, choose the recipient number from
the phonebook and add to the sending list , then
click OK.
Enter the message content;
Click Send or Save to Draft. The message will be saved in
the Draft when failed to send.
Note:
You can group send a message at most 100
recipients;
Each number should be separated by “,”;
The message cannot expand 2,048 characters at most.
2. Inbox
The following prompt box will be displayed when
received a new message;
Reply : Access the edit interface, write the content,
click Send or Save to Draft;
Forward : Forward the selected message;
Delete : Delete the selected message.
Note:
The new message will be saved in PC when LTE Connect
running only, else in (U)SIM instead;
You can use “Shift” or “Ctrl” to selected several
messages;
3. Outbox
The message in the Outbox can be deleted or forwarded.
4. Draft
The MSG sent unsuccessfully will be saved in the Draft .
Click the selected message;
Confirm the recipient and the content, and click Send or
Save to Draft.
5. Recycle
All deleted information will be saved in the Recycle.
6. The selected SMS can be operated as follows:
Save number:
To save the sender’s information to the (U)SIM card or
PC.
Delete text message: To delete the selected message.
Move to:
To move the selected message to Outbox or Draft.
Copy to:
To copy the selected message to Outbox or Draft.
SMS Export
Right-click the selected the message;
Click SMS Export ;
Specify the path and the file name, and click Save.
Note: The exported message will be saved as a *.csv file.
Inhaltsverzeichnis
Andere D-Link Adapter Handbücher
D-Link
D-Link DUB-E100 Bedienungsanleitung
D-Link
D-Link AirPlus DWL-120+ Bedienungsanleitung
D-Link
D-Link Air DWL-120 Bedienungsanleitung
D-Link
D-Link DWA-645 Bedienungsanleitung
D-Link
D-Link DGE-530T Bedienungsanleitung
D-Link
D-Link DWA-132 Bedienungsanleitung
D-Link
D-Link DWA-130 Bedienungsanleitung
D-Link
D-Link DWA-130 Bedienungsanleitung
D-Link
D-Link DWA-171 Bedienungsanleitung
D-Link
D-Link DHP-341 Bedienungsanleitung
D-Link
D-Link Air DWL-120 Bedienungsanleitung
D-Link
D-Link DHP-W221AV Bedienungsanleitung
D-Link
D-Link DWM-156 Bedienungsanleitung
D-Link
D-Link DUB-2312 Bedienungsanleitung
D-Link
D-Link DUB-E130 Bedienungsanleitung
D-Link
D-Link 802.11g Wireless LAN USB Adapter DWL-G122 Bedienungsanleitung
D-Link
D-Link DHP-310AV Bedienungsanleitung
D-Link
D-Link DGE-550T Bedienungsanleitung
D-Link
D-Link PowerLine DHP-302 Bedienungsanleitung
D-Link
D-Link DWA-131 Bedienungsanleitung
