D-Link DAP-1330 Bedienungsanleitung

N300 WI-FI RANGE EXTENDER

DAP-1330

QUICK

INSTALLATION

GUIDE

DAP-1330

ENGLISH

WI-FI CONFIGURATION CARD

N300 WI-FI RANGE EXTENDER

DAP-1330

If any of these items are missing from your packaging,

contact your reseller.

INTRODUCTION

The DAP-1330 extends the wireless coverage of an existing AP (access point) or

wireless router, via wireless or Ethernet port, allowing you to reach more parts of your

home with wireless.

Extend the wireless coverage of another AP or wireless router.

Smartphone

Internet Modem

Computer

Router DAP-1330

Tablet

CONTENTS OF

PACKAGING

DAP-1330

ENGLISH

PRODUCT SETUP

SETUP

SETTING UP THE DAP-1330 USING WI-FI PROTECTED SETUP (WPS)

NOTE: To connect to a wireless router or AP and extend the Wi-Fi network in your

home, please make sure the source router or AP features a WPS Button.

Plug the DAP-1330 into a wall outlet and wait until the

Status/WPS LED is blinking amber. Push the WPS

button on the source wireless router or AP, and then

push the WPS button on the DAP-1330. The Status/

WPS LED will start to ash green.

The DAP-1330 is now ready to share the extended

Wi-Fi network with your PCs and mobile devices.

Connect to the extension network created by the

DAP-1330 using the following network name (SSID):

• 2.4 GHz: (Your router’s SSID)-EXT

Please use your router's usual password.

Please allow up to two minutes for the process to nish.

The Status/WPS LED will turn solid green when the

DAP-1330 has connected successfully to the source

wireless router or AP.

SELECT YOUR METHOD

There are three methods available for setting up the DAP-1330 - using WI-FI Protected

Setup (WPS) (recommended), the QRS Mobile App, or a web browser.

If the Signal Indicator LED has a single amber bar after

the connection process has nished, the DAP-1330 has

established a poor quality connection. To improve the

connection quality, the DAP-1330 should be relocated to

a wall outlet closer to the source wireless router or AP.

The more lit bars on the Signal Indicator LED, the better

the wireless signal.

DAP-1330

ENGLISH

PRODUCT SETUP

SETUP

TROUBLESHOOTING

SETUP AND CONFIGURATION PROBLEMS

1. HOW DO I RESET MY DAP-1330 AC1200 WI-FI RANGE EXTENDER TO FACTORY

DEFAULT SETTINGS?

- Ensure the product is powered on.

- Using a paperclip, press and hold the reset button on the bottom of the device for 5

seconds.

Note: Resetting the product to the factory default will erase the current conguration

settings. The default Wi-Fi network name (SSID) and password are printed on

the DAP-1330's Wi-Fi Conguration Card.

SET UP DAP-1330 WITH QRS MOBILE APP

The DAP-1330 can be congured using your smartphone. Search for "D-Link QRS

Mobile" on the Apple App Store or Google Play, and download the app. Next, connect

your smartphone to the DAP-1330 and follow the helpful in-app prompts, or refer to

the product manual for more information.

SET UP DAP-1330 WITH A WEB BROWSER

The DAP-1330 can also be congured using a web browser. Once you have plugged

the DAP-1330 into a wall outlet within wireless range of your router, open the

wireless utility on your computer, select the name (SSID) of the DAP-1330 network,

and enter the password (both of these are found on your Wi-Fi Conguration Card).

Next, open a web browser (e.g. Internet Explorer, Firefox, Safari, or Chrome)

and enter http://dlinkap.local./ or if you have multiple DAP-1330’s, enter http://

dlinkapwxyz.local./ and replace wxyz with the last 4 digits of the MAC address of the

DAP-1330 you wish to congure.

2. HOW DO I CONNECT A PC OR OTHER DEVICE TO THE DAP-1330 IF I HAVE FORGOTTEN

MY WI-FI NETWORK NAME (SSID) OR WI-FI PASSWORD?

- If you haven't changed the extended Wi-Fi network's settings, you can use the

network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.

- If you did change the network name (SSID) or Wi-Fi password and you did not

record this information on the Wi-Fi Configuration Card or somewhere else, you must

reset the device as described in Question 1 above.

- It is recommended that you make a record of this information so that you can easily

connect additional wireless devices in the future. You can use the included Wi-Fi

Configuration Card to record this important information for future use.

TECHNICAL SUPPORT support.dlink.com.au

DAP-1330

NOTES

Andere Handbücher für DAP-1330

Inhaltsverzeichnis

Andere D-Link Extender Handbücher

D-Link

D-Link DAP-1530 Bedienungsanleitung

D-Link

D-Link DAP-1530 Bedienungsanleitung

D-Link

D-Link DAP-1520 Bedienungsanleitung

D-Link

D-Link DAP-1325 Bedienungsanleitung

D-Link

D-Link DHP-701AV Bedienungsanleitung

D-Link

D-Link DHP-W306AV Bedienungsanleitung

D-Link

D-Link DUA-2000 Bedienungsanleitung

D-Link

D-Link DAP-1950 Bedienungsanleitung

D-Link

D-Link DPE-302GE Bedienungsanleitung

D-Link

D-Link DHP W310AVB1 Bedienungsanleitung

D-Link

D-Link DAP-1650 Bedienungsanleitung

D-Link

D-Link DAP-1955 Bedienungsanleitung

D-Link

D-Link DAP-1320 Handbuch

D-Link

D-Link DAP-LX1880 Bedienungsanleitung

D-Link

D-Link DAP-1520 Bedienungsanleitung

D-Link

D-Link DAP-1360 Bedienungsanleitung

D-Link

D-Link E15 Bedienungsanleitung

D-Link

D-Link DHP-W310AV Bedienungsanleitung

D-Link

D-Link DAP-1325 Bedienungsanleitung

D-Link

D-Link DHP-W220AV Bedienungsanleitung

D-Link

D-Link DHP-701AV Bedienungsanleitung

D-Link

D-Link DWL-G800AP Bedienungsanleitung

D-Link

D-Link DAP-1325 Bedienungsanleitung

D-Link

D-Link DAP-1325 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung