D-Link DFL-200 - Security Appliance Bedienungsanleitung

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.

Network Security

Firewall

5V DC Power Adapter

Before You Begin

If you purchased this Network Security Firewall to connect to your high-speed

Internet connection in a secure manner, you must have either an Ethernet-based

Cable or DSL modem with an established Internet account from an Internet

Service Provider (ISP).

Check Your Package Contents

DFL-200 Network Security Firewall

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

Using a power

supply with

a different voltage

rating will damage

this product and void

its warranty.

If any of the above items are missing, please contact your reseller.

DFL-200

speciﬁ cations subject to change without notice.

Console Cable (RS 232)

Connecting The DFL-200 Network

Security Firewall To Your Network

First, connect the power adapter to the

receptor

at the back panel of the DFL-

receptor at the back panel of the DFL-receptor

200 and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED will turn

to indicate proper operation.

1. Power off your Cable or DSL modem; some devices may not have a on/off

switch and will require you to unplug the power adapter. Now, the DFL-200

should be powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (Power Off) – DFL-200 (Power On)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable /

DSL modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (Power On) – DFL-200 (Power On)

Insert the other end of the Ethernet cable to the WAN port on the back

panel of the DFL-200. The WAN LED light will illuminate to indicate proper

connection. If the WAN LED is not illuminated, please go back to step B and

repeat its instructions.

Insert an Ethernet cable to one of the

LAN ports on the back panel of the

DFL-200 and connect it to your internal network host. The LED light for the

LAN port on the DFL-200 will illuminate to indicate proper connection

Connect the computer that you will use to conﬁ gure the DFL-200 to the

network hub or switch.

WAN port

This is for

the connection of an

Ethernet cable to the

Cable or DSL modem.

COM Port

Used to

connect to the CLI.

Receptor for

Power Adapter

LAN ports

These are

for connecting Ethernet

cables to internal

network hosts.

DMZ port

This is for

the connection of an

Ethernet cable to the

DMZ network.

Reset

system

settings to

factory defaults

POWER LED – a solid light

indicates a proper connection

to the power supply.

NETWORK LEDs – a solid light on

the port indicates a connection to an

Ethernet enabled computer. These

LEDs blinks during data transmission.

Restart your computer

To obtain a new IP address from the DFL-200 you wll need

to restart your computer. Make sure that the network adapter

in your computer is conﬁ gured properly ﬁ rst. Instructions on

how to conﬁ gure the network adapter to obtain an IP address

automatically from the DFL-200 can be found in the appendix.

STATUS LED – will ﬂ ash

consistently to indicate that the

DFL-200 is working properly.

When you have completed the steps in this

Quick Installation

Guide, your connected network should look similar to this:

Using The Setup Wizard

Open your Web browser

and

Open your Web browser and Open your Web browser

type

“http://192.168.1.1”

into the

URL address box. Then press the

Enter

Enter or Enter

Return

key.

The DFL-200 provides Web based conﬁ guration. You can

conﬁ gure your DFL-200 through your Netscape Communicator

or Internet Explorer browser in MS Windows, Macintosh or UNIX

based platforms.

Activate your browser. Then type the IP address of the DFL-200

into the Location (for Netscape) or Address (for IE) ﬁ eld and press

“Enter.” For example: http://192.168.1.1.

(The IP Address shown in the example above is the default

setting. If you have changed the IP Address of the DFL-200

to conform to a network, then input that IP Address in the web

browser, instead of the default IP Address shown.)

The Setup Wizard

(continued)

Step 2 - Set timezone

Enter

the password

Enter the password Enter

that you want to use

for the admin account.

Click

Step 1 - Set admin password

Select

the appropriate

timezone

Click

Enter

the appropriate

Enter the appropriate Enter

dayligt saving time settings.

Here you can choose to either

conﬁ gure your ﬁ rewall over HTTP

or over Secure HTTP (HTTPS).

Welcome to the DFL-200

connection wizard!

Click on

Connect to the unit via

HTTPS instead

to use Secure HTTP

Click

to keep

using HTTP.

The Setup Wizard

(continued)

If you are unsure of which setting to select, please

contact your Internet Service Provider

Step 3 - Conﬁ gure WAN

interface

Select the appropriate

conﬁ guration for the WAN

interface, if you are unsure of

which setting to select, please

contact your Internet Service

Provider.

Click Next and continue to

step 4 further down.

Click

Step 3 - PPPoE

The Setup Wizard

(continued)

Click

Step 3 - Static IP

If you selected Static IP you

have to ﬁ ll out the IP address

information provided to you

by your ISP. You will need to

complete all the required ﬁ elds

except for Secondary DNS

Server. You should probably not

use the numbers displayed in

these ﬁ elds, they are only used

as an example.

Click Next and continue to step

4 further down.

Click

If you selected PPPoE (Point-

to-Point Protocol over Ethernet)

you will have to ﬁ ll out the user

name and password provided

to you by your ISP. The PPPoE

Service Name ﬁ eld should

be left blank unless your ISP

informs you otherwise.

Click Next and continue to step

4 further down.

If you selected PPTP you will

need to specify both PPTP

tunnel parameters and Physical

interface parameters.

PPTP tunnel parameters:

Enter the Username, Password

and the PPTP Server IP address

provided by your ISP.

Physical interface parameters:

DHCP

If your Internet Service Provider is

using DHCP you should select the

DHCP radio button.

Static IP

If your Internet Service Provider

is using Static IP you should

select the Static IP radio button

and enter IP Address, choose

a Subnet Mask and enter the

Gateway IP address.

The Setup Wizard

(continued)

Click

Step 3 - PPTP

The Setup Wizard

(continued)

Click

Step 3 - Big Pond

If you selected Big Pond you will

have to ﬁ ll out the user name

and password provided to you

by your ISP.

Click Next and continue to step

4 further down.

If you want to use the built-in

DHCP Server in the DFL-200,

choose Enable DHCP Server

in this screen. You then need to

specify a range of IP addresses

to hand out to the DHCP clients.

This range is entered in the

format “Start IP – Stop IP” i.e.

192.168.1.100 – 192.168.1.200.

If you don’t want to use the built-

in DHCP Server or conﬁ gure

it later, choose Disable DHCP

Server and click Next when

done.

The Setup Wizard

(continued)

Click

Step 4 - Set up built-in DHCP

server

Click

Step 5 - Conﬁ gure helper

servers

NTP Servers

- If enabled,

specify which NTP Servers

that should be used to

syncronize the ﬁ rewall time

against.

Syslog Servers

– If enabled,

specify where the ﬁ rewall

should log, you can specify

up to two Syslog receivers.

192.168.1.100-192.168.1.200

Andere Handbücher für DFL-200 - Security Appliance

Inhaltsverzeichnis

Andere D-Link Firewall Handbücher

D-Link

D-Link DFL-800 - Security Appliance Montage- und Bedienungsanleitung

D-Link

D-Link NetDefend DFL-860 Bedienungsanleitung

D-Link

D-Link DFL-600 Bedienungsanleitung

D-Link

D-Link DFL-210-IPS-12 Bedienungsanleitung

D-Link

D-Link D DFL-500 DFL-500 Bedienungsanleitung

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Bedienungsanleitung

D-Link

D-Link DFL-700 - Security Appliance Bedienungsanleitung

D-Link

D-Link NetDefend DFL-1660 Bedienungsanleitung

D-Link

D-Link NetDefend DFL-800 Bedienungsanleitung

D-Link

D-Link DFL-1000 Bedienungsanleitung

D-Link

D-Link NetDefend DFL-260E Bedienungsanleitung

D-Link

D-Link DFL-200 - Security Appliance Bedienungsanleitung

D-Link

D-Link DFL-500 Bedienungsanleitung

D-Link

D-Link NetDefend SOHO DFL-160 Bedienungsanleitung

D-Link

D-Link NetDefend DFL-800 Bedienungsanleitung

D-Link

D-Link DFL-1100 - Security Appliance Bedienungsanleitung

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Bedienungsanleitung

D-Link

D-Link NetDefend DFL-2560G Handbuch

D-Link

D-Link DFL-700 - Security Appliance Bedienungsanleitung

D-Link

D-Link NetDefend Firewall Series Bedienungsanleitung

D-Link

D-Link DFL-1000 Bedienungsanleitung

D-Link

D-Link DFL-1000 Bedienungsanleitung

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Bedienungsanleitung

D-Link

D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung