D-Link SECURICAM Network DCS-900 Bedienungsanleitung

DCS-900

Internet Camera

Building Networks for People

(10/04/04)

Manual

Version 1.50

Contents

Package Contents ...............................................................3

Introduction ..........................................................................4

Hardware Installation............................................................9

Security ..............................................................................10

Using the Setup Wizard .....................................................11

DCS-900 Configuration .....................................................16

Installing the DCS-900 Behind a Router............................23

IPView Lite Application Installation ....................................37

IPView Lite.........................................................................42

Uninstall IPView Lite Application........................................72

Appendix (FAQ, Troubleshooting, How to Ping your IP

Address, Time Zone Table, Active X Installation). ........74

Technical Specifications ....................................................87

Contacting Technical Support............................................89

Warranty ...................................... .................................... ...90

Registration........................................................................93

Package Contents

If any of the above items are missing, please contact your reseller.

•OneDCS-900Internet Camera

•OneInstallationCD-ROM

•OneAC power adapter

•One Camera Stand

•One Category 5 Ethernet Cable

Local Area Network: 10Base-T Ethernet or 100BaseTX Fast Ethernet

Recommended: PC, Mac or Notebook to access the Internet Camera

Web Configuration

• JavaEnabledand Compliant Web Browser(recommended)

•CPU: Pentium III, 450MHz or above

•Memory Size: 128MB recommended

• VGAcard resolution: 800x600or above

IPView Lite Configuration

• Windows XP, Me, 2000, 98SE

•CPU: Pentium III, 850MHz or above

•Memory Size: 128MB (256MB recommended)

•VGA card resolution: 800 x 600 or above

System Requirements:

Introduction

Congratulationson your purchase ofthe DCS-900 InternetCamera! The DCS-900 is a

versatile and unique solution for your small office or home. Unlike a PC Camera, the

DCS-900 is a stand-alone system with a built-in CPU and Web server that transmits

highquality videoimages for monitoring.The DCS-900 can be accessed remotely, and

controlled from any PC/Notebook over the Intranet or Internet via a web browser. The

simple installation procedure and intuitive web-based interface offer easy integration

with your Ethernet or Fast Ethernet network. The DCS-900 also comes with remote

monitoringcapability for a complete andcost-effective solution.

Features & Benefits

Simple to Use

TheDCS-900isastand-alonesystemwithabuilt-in CPU, requiring no special hardware

orsoftwaresuchasPC frame grabber cards.TheDCS-900supportsbothActiveX mode

forInternet ExplorerandJavamodefor InternetExplorerandNetscapeNavigator.Allthat

is required is a computer with current Web browser software.

Supports a Variety of Platforms

SupportingTCP/IPnetworking,HTTP,andotherInternet related protocols, the DCS-900

can be utilized in a mixed operating system environment such as Windows, Unix, and

Macintosh.ItcanalsobeintegratedeasilyintootherInternet/Intranetapplicationsbecause

ofits standards-based features.

Ethernet or Fast Ethernet Support

The DCS-900 supports traditional wired transmission, making the DCS-900 easy to

integrate into your existing network environment. The DCS-900 works with a 10Mbps

Ethernetbased networkor 100Mbps Fast Ethernet based network.

Features & Benefits (continued)

Web Configuration

Using a standard Web browser,Administrators can configure and manage the Internet

Cameradirectly from itsown Web pagevia the Intranetor Internet. Thismeansyou can

accessyour DCS-900 at anytime from anywhere in the world!

Remote Monitoring Utility

The IPView Lite application adds enhanced features and functionality for the Internet

Cameraand allowsadministrators toconfigure andaccess theInternet Camera from a

remotesite via Intranet or Internet. Other features include image monitoring, recording

images to a hard drive, viewing up to 4 cameras on one screen, and taking snapshots.

Broad Range of Applications

With today’s high-speed Internet services, the Internet Camera can provide the ideal

solution for live video images over the Intranet and Internet for remote monitoring. The

Internet Camera allows remote access from a Web browser for live image viewing and

allows the administrator to manage and control the Internet Camera at anytime, from

anywherein the world. Many applications exist, includingindustrialandpublicmonitoring

of homes, offices, banks, hospitals, child-care centers, and amusement parks.

Network Cable Connector

TheDCS-900 featuresanRJ-45connectorforconnections to 10Base-TEthernetcabling

or100Base-TXFastEthernetcabling (which should be Category5UTPcable).The port

supportsthe NWay protocol,allowing theDCS-900 to automaticallydetect or negotiate

the transmission speed of the network.

DC Power Connector

The DC power input connector is labeled DC 5V with a single jack socket to supply

powertothe DCS-900.

Reset Button

Reset will be initiated when the reset button is pressed once and Power LED begins to

flash.

Factory Reset will be initiated when the reset button is pressed continuously for three

seconds or when the Power LED begins to light up. Release the reset button and the

Power LED will begin to flash indicating that the DCS-900’s settings are reverting back

tothefactorysettings.TheIPaddresswillalsoreturntothedefaultsettingof192.168.0.20.

Connections

Rear Panel view

Ethernet Cable

Connector

ResetButton

DCPowerConnector

Connections (continued)

Bottom Panel view

Stand Connector

LEDS

LED stands for Light-Emitting Diode.

Power LED

ThePowerLEDispositionedontherightsideoftheDCS-900lens.Steadygreenconfirms

thatthe DCS-900is poweredON.

Note:

There are three settings for the Power LED for monitoring purposes: Normal / Off /

Dummy. Please refer to the DCS-900 Camera Configuration section for detailed

informationandusage.

LAN LED

The LAN LED is positioned on the right side of the DCS-900’s lens. It is located below

thePower LED.

Steady orange confirms a good connection to the LAN.

Dependingonthe data traffic,the LED will beginto flash to indicatethat the DCS-900 is

receiving/transceivingfrom/totheLAN network.

Front view

Power LED

LANLED

Hardware Installation

Connect the Ethernet Cable

Connectthe includedEthernet cable to the network

cable connector located on the back panel of the

DCS-900 and attach it to the network. Network

Connectivityisconfirmedwhentheorange LED

Indicatoronthe DCS-900 located belowthePowerLED

is illuminated.

Attach the External Power Supply

Attach the external power supply to the DC power input

connectorlocated on therear panel ofthe

DCS-900 and connect it to your local power supply.

Note:Power source is confirmedwhen the green LED

Power Indicator located to the right of the lens on the

DCS-900isilluminated.

Attach the Swivel Stand

Locate the stand connector on the bottom panel of the

DCS-900and screw on the swivel stand to the base of

theDCS-900.

Security

To ensure the highest security and prevent unauthorized usage of the DCS-900, the

Administrator has the exclusive privilege to authorize all users. The DCS-900 supports

multi-level password protection/access that can be restricted by the Administrator for

defined userswho have a User Name and User Password.

TheAdministrator can release apublicUser Name and Password so thatwhen remote

users access the DCS-900 they will be allowed to view the images transmitted by the

DCS-900.

Note:

WhentheDCS-900 isusedforthefirsttime,itishighlyrecommendedthattheAdministrator

settheAdmin ID and Admin Password to constrainuser access tothe DCS-900since

theDefault settingsareNullString(no password).Once the IDandPasswordaredefined,

onlytheAdministrator has access to the management of the DCS-900.This procedure

should be done as soon as possible since the security features of the DCS-900 will not

be enabled until the Admin ID and Admin Password are defined.

Andere Handbücher für SECURICAM Network DCS-900

Inhaltsverzeichnis

Andere D-Link IP-Kamera Handbücher

D-Link

D-Link DCS-936L Bedienungsanleitung

D-Link

D-Link DCS-2121 - SECURICAM Network Camera Bedienungsanleitung

D-Link

D-Link DCS-5211L Bedienungsanleitung

D-Link

D-Link DCS-1000 Bedienungsanleitung

D-Link

D-Link SECURICAM NETWORK DCS-5300 Bedienungsanleitung

D-Link

D-Link WIRELESS G DCS-950G Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-950 Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-6620 Bedienungsanleitung

D-Link

D-Link DCS-825L Bedienungsanleitung

D-Link

D-Link DCS-2800LH-EU Bedienungsanleitung

D-Link

D-Link DCS-960L Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-2120 Bedienungsanleitung

D-Link

D-Link DCS-5222L Bedienungsanleitung

D-Link

D-Link DCS-2330L Bedienungsanleitung

D-Link

D-Link WIRELESS G DCS-950G Bedienungsanleitung

D-Link

D-Link DCS-2630L Bedienungsanleitung

D-Link

D-Link DCS-5020L Handbuch

D-Link

D-Link DCS-1110 - Network Camera Bedienungsanleitung

D-Link

D-Link DCS-5030L Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-5300G Bedienungsanleitung

D-Link

D-Link DCS-4201 Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-900W Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-2100+ Bedienungsanleitung

D-Link

D-Link DCS-942L Installationsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung