D-Link DFM 562I Bedienungsanleitung

D-

-L

User’s Guide

D-Link DFM 562I Controllerless Modem Card User’s Guide

FCC Requirements

This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that

contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN)

for this equipment. IF REQUESTED. THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE

COMPANY.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have

these entire devices ring when your telephone number is called in most. But not all areas the sum of the

REN’s of all devices connected to one line should not exceed five (5.0). To be certain of the number of

devices you may connect to your line. As determined by the REN. You should contact your local telephone

company to determine the maximum REN of the area you are calling from. If your telephone equipment

causes harm to the telephone network. The Telephone Company may discontinue your service temporally. If

possible, they will notify you in advance. But if the advanced notice is failed, you will be notified as soon as

possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may change in its facilities, equipment, operations or procedures that could affect

the proper functions of your equipment. If this occurs, you will be notified in advance to give you an

opportunity to maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the following address and phone

number for information on obtaining service or repairs. The Telephone Company may ask you to disconnect

this equipment from the network until the problem is solved or until that the equipment is not detected

malfunctioning. This equipment may not be used on coin service provided by the Telephone Company.

Connection to party lines is subject to state Tariffs.

Federal Communications Commission

Radio Frequency Interference Statement.

Note: This equipment has been tested and found to comply with the limitation for a lass B digital device

pursuant to Part 15 of the FCC Rules. These restrictions are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the

instruction manual may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If the equipment does cause harmful

interference to radio or television reception, which can be determine by tuning the equipment off and on, the

user is suggested to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the distance between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio TV technician for help.

Notices:

(1) The changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

(2) Shielded interface cables and AC power cord if any must be used in order to comply with the emission

limits.

Notices to Australian users:

The modem card must only be used in a data terminal equipment (DTE) e.g. computer, that has a screw

down cover (lid). As unsafe voltages (TNV) exist on the modem card, disconnect the modem card from the

telephone line while the cover (lid) of the DTE (computer) is removed.

Installation of the modem card in a DTE (computer) which does not require a tool to open the cover (lid) will

render the permit void.

Disconnect the telephone line before opening the cover (lid) of the DTE (computer). Do not connect the

customer equipment to the telephone line while the cover (lid) of the DTE (computer) is open.

D-Link DFM 562I Controllerless Modem Card User’s Guide

Modems connected to the Australian telecommunications network must be marked in accordance with the

Labeling Notice. This modem has been specifically configured to ensure compliance with the ACA

Standards. Do not adjust your modem or software outside the values indicated as below. To do so would

result in your modem being operated in a non-compliant manner.

Modem Commands:

Command Default Permissible Range

ATA - Do not use

ATB B0 Do not set to B1

AT&G &G0 &G2

AT&P &P0 &P1

ATSn see table below

S register Default Permissible Range

s6 2 2 to 6

Call Attempts/Retries:

Applications software shall be configured so that no more than 3 attempts are made to

establish a connection to a given number (Note: if the modem can detect service tones, up to 10 attempts

can be made). If the call sequence is unsuccessful, there shall be a delay of at least 30 minutes before

attempting to call the number again.

Failure to set the modem and any application software used with the modem, to the values

shown as above will result in the modem being operated in a non-compliant manner.

Consequently, this would be in violation of the Labeling Notice for this equipment, and the

Telecommunications ACT 1997 prescribes penalties for the connection of non-compliant equipment.

WARNING

FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A

TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES

CUSTOMER EQUIPMENT PREVIOUSLY LABELLED

PERMITTED OR CERTIFIED.

WARNING

ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS

MPLIAN

E LABEL

D-Link DFM 562I Controllerless Modem Card User’s Guide

Table of Contents

Chapter 1 Introduction.................................................................................. 5

1.1 Introduction ................................................................................................................. 5

1.2 What’s in the package ................................................................................................ 5

Chapter 2 Specifications............................................................................... 6

Chapter 3 Hardware Installation................................................................... 7

Chapter 4 Software Installation.................................................................... 8

4.1 Windows 98 ................................................................................................................ 8

4.2 Windows ME..............................................................................................................11

4.3 Windows NT 4.0 ....................................................................................................... 16

4.4 Windows 2000 .......................................................................................................... 30

4.5 Window XP ............................................................................................................... 34

Chapter 5 Select Modem Country .............................................................. 36

5.1 Windows 98 .............................................................................................................. 36

5.2 Windows ME............................................................................................................. 37

5.2 Windows NT4.0 ........................................................................................................ 38

5.3 Windows 2000 .......................................................................................................... 39

5.4 Window XP ............................................................................................................... 41

Chapter 6 Diagnostics ................................................................................ 43

6.1 Windows 98/ME........................................................................................................ 43

6.2 Windows 2000 .......................................................................................................... 45

6.3 Windows XP ............................................................................................................. 48

Chapter 7 Uninstalling ................................................................................ 51

7.1 Windows 98 .............................................................................................................. 51

7.2 Windows ME............................................................................................................. 53

7.3 Windows NT 4.0 ....................................................................................................... 55

7.4 Windows 2000 .......................................................................................................... 57

7.5 Windows XP ............................................................................................................. 59

Chapter 8 Troubleshooting......................................................................... 61

D-Link DFM 562I Controllerless Modem Card User’s Guide

Chapter 1 Introduction

1.1 Introduction

Thank you for selecting the D-Link DFM 562I Controllerless Modem Card with Ambient

chipset. This modem with Ambient chipset is a hardware modem that uses the state-of-the-art

single chip and discrete DAA design. Besides, it has the advantages of high quality, high

reliability, more compact and low cost. This modem with Ambient chipset is compatible with

current Windows 98, ME, NT 4.0, 2000,XP operation systems because of its independent OS.

Moreover, it follows the V.92 standard, so you can surf the Internet at 56K speed, but it depends

on the condition of the telephone line and the ISP you connected to. We truly hope that our series

products with Ambient chipset can meet your needs.

1.2 What’s in the Package

• D-Link DFM562I Controllerless Modem Card with Ambient Chipset

• CD-ROM (Comprises Application Software, Modem Drivers and User’s Guide)

• Quick Guide for Installing Modem Drivers

• Phone Cord

D-Link DFM 562I Controllerless Modem Card User’s Guide

Chapter 2 Specifications

Specifications:

Chipset (Internal type) Ambient MD5628D

Line Connection PSTN, 2 Wires

Data Transmission Rate ITU-T V.92

56000/33600/28800/14400/9600/7200/4800/2400/

1200/300 bps BELL 103 and BELL 212A

Fax Compatibility Send/Receive G3 Fax, 14400/9600/4800 bps

Error Correction MNP 2-4/V.42 LAPM

Data Compression MNP 5/V.42 bis

Command Set Enhanced AT Command, Fax Class 1

Communication Model Asynchronous

DTE Speed (MAX) 115,200 bps

Transmit Level -11(±1dBm)

Flow Control XON/XOFF

RTS/CTS

Dialing Mode Touch Tone / Rotary Pulse (Countries depend)

Auto Dial & Auto Answer YES

Noted Features NVRAM Directory and Stored Profile,

Speed Buffering, Auto Format/Speed sensing

Auto Retrain

Telephone Interface PSTN Line through RJ-11

Card Dimension 12.2mm*7.5mm*1.6mm

Applicable PTT Approval Countries depend

Safety FCC, CE

Features

Ambient single chip solution

Surf the Internet at blazing 56K speed

Independent OS – Compatible with Windows 98/ME/NT4.0/2000/XP

Fully software upgradeable

D-Link DFM 562I Controllerless Modem Card User’s Guide

Chapter 3 Hardware Installation

1.Unplug the telephone from the wall socket, then plug the telephone into the socket on the

back of the modem marked PHONE.

2.Plug the telephone cord supplied into the socket on the back of the modem marked LINE.

3.Plug the other end of the cord into the wall socket.

COMPUTER

LINE

PHONE

MIC

SPK

D-Link DFM 562I Controllerless Modem Card User’s Guide

Chapter 4 Software Installation

The following sections explain how to install the modem drivers under Windows

98/ME/NT4.0/2000/XP. Refer to the section, which best suites, your operating system.

4.1 Windows 98

1. Please insert the driver CD supplied when you see the message of PCI Communication

Device, then click Next to search for the driver.

2. Select the Search for the best driver for your device. [Recommended] and click Next to

continue.

D-Link DFM 562I Controllerless Modem Card User’s Guide

3. Select “Specify a location:” and type the path: I:\Driver\Win9x ( I is the letter of CD-ROM

drive ) and click Next to continue.

4. Click Next to start the installation.

D-Link DFM 562I Controllerless Modem Card User’s Guide

5. Click Finish to end this installation procedure.

6. Click OK

Andere Handbücher für DFM 562I

Inhaltsverzeichnis

Andere D-Link Netzwerkkarte Handbücher

D-Link

D-Link DGE-660TD Bedienungsanleitung

D-Link

D-Link DHP-306AV Bedienungsanleitung

D-Link

D-Link DE-660 CT Plus Bedienungsanleitung

D-Link

D-Link DCF-560M Bedienungsanleitung

D-Link

D-Link DHP-307AV Bedienungsanleitung

D-Link

D-Link PC DE-220P Bedienungsanleitung

D-Link

D-Link DGE-560SX Bedienungsanleitung

D-Link

D-Link Conexant HSFi DFM-562IS Bedienungsanleitung

D-Link

D-Link DHN-120 Bedienungsanleitung

D-Link

D-Link DFE-530TX+ Bedienungsanleitung

D-Link

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... Bedienungsanleitung

D-Link

D-Link DWL-G820 - AirPlus Xtreme G Bedienungsanleitung

D-Link

D-Link DCF-560M Bedienungsanleitung

D-Link

D-Link DFE-530TX+ Bedienungsanleitung

D-Link

D-Link DHP-306AV Bedienungsanleitung

D-Link

D-Link 32-bit PCI Fast Ethernet Network Adapter... Bedienungsanleitung

D-Link

D-Link DCF-650BT Bedienungsanleitung

D-Link

D-Link DFE-650 Series Bedienungsanleitung

D-Link

D-Link DWA-643 Bedienungsanleitung

D-Link

D-Link DW-655H Bedienungsanleitung

D-Link

D-Link DFE-580TX Bedienungsanleitung

D-Link

D-Link DGE-500T Bedienungsanleitung

D-Link

D-Link DFL-M510 Installationsanleitung

D-Link

D-Link DW-655C Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung

Gigafast

Gigafast EE101-AEX Bedienungsanleitung