D-Link D DI-707P DI-707P Bedienungsanleitung

This product can be set up using

a current java-enabled web

browser, i.e., Internet Explorer or

Netscape Navigator.

DI-707P

Ethernet Broadband

Router and Print Server

5V DC Power Adapter

specifications subject to change without notice. DI-707P.08082003

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-707P Broadband Router. The DI-707P acts as a DHCP server and will assign

all the necessary IP address information on your network. See Appendix at the

end of this Quick Installation Guide or the Manual on the CD-ROM for setting

each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-707P Ethernet Broadband Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight-Through) Cable

Using a power supply

with a different voltage

rating will damage and void

the warranty of this product.

If any of the above items are missing, please contact your reseller.

Connecting The DI-707P Broadband

Router To Your Network

B. WAN Port

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

C. LAN Ports These

are the connections

for Ethernet cables to

Ethernet enabled

computers.

D. Printer Port You

can connect a

Printer to the

Parallel Port here.

A. First, connect the power adapter to the receptor at the back panel of the

DI-707P and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. 1. Power off your Cable or DSL modem; some devices may not have a on/off

switch and will require you to unplug the power adapter. Now, the DI-707P

should be powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (Power Off) – DI-707P (Power On)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable /

DSL modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (Power On) – DI-707P (Power On)

Insert the other end of the Ethernet cable to the WAN PORT on the back panel

of the DI-707P. The WAN LED light will illuminate to indicate proper connection.

If the WAN LED is not illuminated, please go back to step B1 and repeat the

instructions.

C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-707P and an

available Ethernet port on the network adapter in the computer you will use to

configure the DI-707P. The LED light for LAN Port 1 will illuminate to indicate

proper connection. (Note: The LAN Ports on the DI-707P are Auto-MDI/MDIX.

Meaning you can use a straight-through or crossover-Ethernet cable to the LAN

Ports.)

D. The parallel port on the DI-707P is used to connect printers only. Connect one

end of the printer cable to your printer and the other end to the DI-707P.

Reset Button

Pressing this button restores

the Router to its original factory

default settings.

A. Receptor for

Power Adapter.

Restart Your Computer

Connecting Additional Computers To

The DI-707P

Using additional Ethernet (CAT5 UTP) cables, connect your

Ethernet-equipped computers to the remaining Ethernet LAN ports

on the back panel of the DI-707P

WAN LED – a

solid light indicates

connection on the

WAN port. This

LED blinks during

data transmission.

LOCAL NETWORK

LEDs – a solid light

on the port indicates a

connection to an

Ethernet enabled

computer on ports 1-7.

This LED blinks during

data transmission.

POWER LED – a solid

light indicates a proper

connection to the

power supply.

M2 LED – a solid light indicates

that Internet connection has

been established.

M1 LED – will flash

consistently to indicate

that the DI-707P is

working properly.

When you have completed the steps in this Quick Installation

Guide, your connected network should look similar to this:

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password field blank.

Click OK

The Setup Wizard (continued)

Once you have logged in, the Home

screen will appear.

You will see the following screens

Set up your new password.You have

the option to establish a password.

Click Run Wizard

Click Next

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the type

of Internet connection for your router.

If you are unsure of which

setting to select, please contact

your Internet Service Provider.

Click Next

Choose your time zone from the drop

down list.

The Setup Wizard (continued)

If your ISP requires a Static IP

Address, and this option is selected,

then this screen will appear:

If your ISP uses PPPoE (Point-to-Point

Protocol over Ethernet), and this option

is selected, then this screen will appear:

(Used mainly for DSL Internet service.)

Enter the IP address information origi-

nally provided to you by your ISP. You

will need to complete all the required

fields.

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and password

provided to you by your ISP.

If you selected Dynamic IP Address,

this screen will appear: (Used mainly

for Cable Internet service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network

adapter in your computer. You can

also manually type in the MAC

address.

Click Next

This setup should be done on the computer

that is registered on the ISP’s network.

Your Setup is Complete!

Click Restart

Test Internet Connection.

You will be returned to the Home tab.

For additional settings or information,

refer to the Advanced, Tools, or Status

tabs on the web-management interface;

or to the Manual located on the CD.

Then relaunch your Web browser (i.e.,

Internet Explorer or Netscape Naviga-

tor), to link to your favorite Web site to

test your Internet connection.

Click to Exit

APPENDIX

Insert the installation CD-ROM into the CD-

ROM drive. The following window will be

shown automatically. If it is not, please run

“autorun.exe” on the CD-ROM.

Installing the Print Server Software

Wait until the following Welcome dialog

appears.

Select the destination folder.

Click Next

Click Install Windows

Printer Software

Click Next

Select your Windows

operating system

After rebooting your computer, the software installation procedure is finished.

Installing the Print Server Software (continued)

Configuring on Windows 98se/Me Platforms

After you finish the software installation

procedure, your computer will be capable of

network printing provided by the DI-707P. For

convenience, we call the printer connected to

the printer port of the DI-707P a printer server.

On a Windows 95/98 platform, open the

Printers window in the My Computer menu.

Click OK

Now, you can configure the print server of the

DI-707P:

Find out the corresponding icon of your printer

server, for example, the HP LaserJet 6L.

Right click on that icon, and then select

Properties.

The following screen appears:

Then, the setup program will begin to install

the programs into the destination folder.

When the following window is displayed.

Click Finish

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DVG-7022S Bedienungsanleitung

D-Link

D-Link DIR-619 Handbuch

D-Link

D-Link Web Smart Switch DGS-1210-16 Bedienungsanleitung

D-Link

D-Link DIR-1750 Bedienungsanleitung

D-Link

D-Link DIR-813 Bedienungsanleitung

D-Link

D-Link DES-1005D Bedienungsanleitung

D-Link

D-Link DIR-895L Bedienungsanleitung

D-Link

D-Link DSL-2640R Bedienungsanleitung

D-Link

D-Link DSS-5+ Bedienungsanleitung

D-Link

D-Link DIR-825/ACF Bedienungsanleitung

D-Link

D-Link AirPlus DWL-810+ Bedienungsanleitung

D-Link

D-Link DSL-500 Bedienungsanleitung

D-Link

D-Link DIR-840 Bedienungsanleitung

D-Link

D-Link DSL-502T Bedienungsanleitung

D-Link

D-Link DWR-910 Bedienungsanleitung

D-Link

D-Link DIR-120 Bedienungsanleitung

D-Link

D-Link DSL-2890AL Bedienungsanleitung

D-Link

D-Link DWM-312W Bedienungsanleitung

D-Link

D-Link DIR-601 Bedienungsanleitung

D-Link

D-Link DGS-1224T - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DSL-G804V Bedienungsanleitung

D-Link

D-Link DES-1526 Bedienungsanleitung

D-Link

D-Link AC750 Bedienungsanleitung

D-Link

D-Link DI-804HV - Express ENwork Router Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise