D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

2D-Link DIR-330 Quick Install Guide

Package Contents

If any of the above items are missing, please contact your reseller.

• D-Link DIR-330 Wireless VPN Router

• Power Adapter

• Ethernet Cable

• Manual and Warranty on CD

Note: Using a power supply with a different voltage rating than the one

included with the DIR-330 will cause damage and void the warranty for this

product.

System Requirements

Network Requirements

• An Ethernet-based Cable or DSL modem

• 10/100 Ethernet devices

• 802.11g/b wireless clients

Web-based Conﬁguration Utility Requirements

Computer with the following:

• Windows®, Mac OS, or Linux-based operating system

• An installed Ethernet adapter

Browser Requirements:

• Internet Explorer 7.0 or higher

• Firefox 3.0.5 or higher

• Chrome 1.0.154.43 or higher

Make sure that you have the latest version of Java installed. Visit www.java.

com to download the latest version.

3 D-Link DIR-330 Quick Install Guide

The D-Link wireless router lets you access your network using a wireless

connection from virtually anywhere within the operating range of your wireless

network. Keep in mind, however, that the number, thickness and location of

walls, ceilings, or other objects that the wireless signals must pass through,

may limit the range. Typical ranges vary depending on the types of materials

and background RF (radio frequency) noise in your home or business. The

key to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the D-Link router and

other network devices to a minimum. Each wall or ceiling can reduce your

adapter’s range from 3-90 feet (1-30 meters.) Position your devices so

that the number of walls or ceilings is minimized.

2. Be aware of the direct line between network devices. A wall that is 1.5

feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1

meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick.

Position devices so that the signal will travel straight through a wall or

ceiling (instead of at an angle) for better reception.

3. Building Materials make a difference. A solid metal door or aluminum

studs may have a negative effect on range. Try to position access points,

wireless routers, and computers so that the signal passes through drywall

or open doorways. Materials and objects such as glass, steel, metal, walls

with insulation, water (ﬁsh tanks), mirrors, ﬁle cabinets, brick, and concrete

will degrade your wireless signal.

4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical

devices or appliances that generate RF noise.

5. If you are using 2.4GHz cordless phones or X-10 (wireless products

such as ceiling fans, lights, and home security systems), your wireless

connection may degrade dramatically or drop completely. Make sure your

2.4GHz phone base is as far away from your wireless devices as possible.

The base transmits a signal even if the phone is not in use.

Wireless Considerations

4D-Link DIR-330 Quick Install Guide

Hardware Overview

LEDs

WLAN LED

A solid light indicates that the wireless

segment is ready. This LED blinks

during wireless data transmission.

Status LED

A blinking light indicates

that the DIR-330 is ready.

Internet LED

A solid light indicates connection on

the Internet port. This LED blinks

during data transmission.

Power LED

A solid light indicates a

proper connection to the

power supply.

Local Network LEDs

A solid light indicates a connection

to an Ethernet-enabled computer

on ports 1-4. This LED blinks

during data transmission.

5 D-Link DIR-330 Quick Install Guide

Hardware Overview

Connections

Reset

Pressing the Reset button

restores the router to its

original factory default

settings.

Power Receptor

Receptor for the supplied

power adapter.

LAN Ports (1-4)

Connect Ethernet devices such

as computers, switches, and

hubs.

Internet Port

The auto MDI/MDIX Internet port

is the connection for the Ethernet

cable to the cable or DSL modem.

* The USB port is currently inactive.

6D-Link DIR-330 Quick Install Guide

Connect to your Network

If you are connecting the router to a cable/DSL/satellite modem,

please follow the steps below:

1. Place the router in an open and central location. Do not plug the

power adapter into the router.

2. Turn the power off on your modem. If there is no on/off switch, then

unplug the modem’s power adapter. Shut down your computer.

3. Unplug the Ethernet cable (that connects your computer to your

modem) from your computer and place it into the Internet port

on the router.

4. Plug an Ethernet cable into one of the four LAN ports on the router.

Plug the other end into the Ethernet port on your computer.

5. Turn on or plug in your modem. Wait for the modem to boot (about

30 seconds).

6. Plug the power adapter to the router and connect to an outlet or

power strip. Wait about 30 seconds for the router to boot.

7. Turn on your computer.

8. Verify the link lights on the router. The power light, Internet light,

and the LAN light (the port that your computer is plugged into)

should be lit. If not, make sure your computer, modem, and router

are powered on and verify the cable connections are correct.

7 D-Link DIR-330 Quick Install Guide

Using the Setup Wizard

Open your web browser and

type http://192.168.0.1 into

the URL address box. Press

Enter.

Type admin for the

username and leave

the password blank.

The logon pop-up screen will appear:

Once you have logged in, the Setup screen will appear:

Click Setup Wizard

*PPTP, L2TP, Russian PPPoE, and Russian PPTP Internet conﬁgurations referenced

in this section do not apply in North America.

8D-Link DIR-330 Quick Install Guide

Create a new password and then click Next to continue.

Click Next

Select your time zone from the drop-down menu and then click Next to

continue.

Click Next

Select the type of Internet connection you use and then click Next to

continue.

Click Next to continue.

Click Next

9 D-Link DIR-330 Quick Install Guide

If you selected Dynamic, you may need to enter the MAC address of the

computer that was last connected directly to your modem. If you are currently

using that computer, click Clone Your PC’s MAC Address and then click

Next to continue.

The Host Name is optional but may

be required by some ISPs.The default

host name is the device name of the

Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Next to continue. Select Static if your ISP assigned you the IP address,

subnet mask, gateway, and DNS server addresses.

Note: Make sure to remove your PPPoE

software from your computer.The software

is no longer needed and will not work

through a router.

Click Next

If you selected PPTP, enter your PPTP settings supplied by your ISP and

your PPTP username and password. Click Next to continue.

Click Next

10D-Link DIR-330 Quick Install Guide

Click Next

If you selected Big Pond, select your authentication server from the drop down

menu. You will also need to enter your Big Pond username and password.

Click Next to continue.

Click Next

If you selected L2TP, enter your L2TP settings supplied by your ISP and your

L2TP username and password. Click Next to continue.

If you selected Static, enter your network settings supplied by your Internet

provider. Click Next to continue.

Click Next

Andere Handbücher für DIR-330 - Wireless G VPN Router

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link EAGLE PRO AI N300 Smart Bedienungsanleitung

D-Link

D-Link xStack DGS-3610 Series Bedienungsanleitung

D-Link

D-Link DAP-1360U Bedienungsanleitung

D-Link

D-Link DSL-G225 Bedienungsanleitung

D-Link

D-Link DIR-853 Bedienungsanleitung

D-Link

D-Link DGS-1016D - Switch Bedienungsanleitung

D-Link

D-Link DSL-G804V Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DSL-2730E Bedienungsanleitung

D-Link

D-Link DSL-2540T Bedienungsanleitung

D-Link

D-Link DI-300 series Bedienungsanleitung

D-Link

D-Link DSL-2730E Bedienungsanleitung

D-Link

D-Link EBR-2310 Bedienungsanleitung

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DSL-504G Bedienungsanleitung

D-Link

D-Link DES-1024DG Bedienungsanleitung

D-Link

D-Link DSL-504T Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DIR-853/EE Bedienungsanleitung

D-Link

D-Link DIR-859 Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link DIR-850L Bedienungsanleitung

D-Link

D-Link COVR DKT-883 Bedienungsanleitung

D-Link

D-Link xStack DGS-3324SRi Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise