D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Bedienungsanleitung

2D-Link DSL-2540B Quick Install Guide

• ADSL2/2+ 4-Port Ethernet Router

• 12VDC, 1A DC CEC-compliant switching power adapter

• RJ-11 telephone cable

• RJ-45 Ethernet cable

• Quick Install Guide

• CD-ROM (User Manual + Drivers)

General Information

The D-Link DSL-2540B is an ADSL2+ router offering the convenience

of four Ethernet ports for additional computers. This Quick Install

Guide provides you with a simple and easy-to-understand format to

install and conﬁgure your router.

Package Contents

Note: Using a power supply with a different voltage rating than the

one included with the DSL-2540B will cause damage and void the

warranty for this product.

If any of the above items are missing, please contact your reseller.

3 D-Link DSL-2540B Quick Install Guide

Important Safety Instructions

• Place your router on a ﬂat surface close to the cables in a location

with sufﬁcient ventilation.

• To prevent overheating, do not obstruct the ventilation openings of

this equipment.

• Plug this equipment into a surge protector to reduce the risk of

damage from power surges and lightning strikes.

• Operate this equipment only from an electrical outlet with the correct

power source as indicated on the adapter.

• Do not open the cover of this equipment. Opening the cover will void

any warranties on the equipment.

• Unplug equipment ﬁrst before cleaning. A damp cloth can be used

to clean the equipment. Do not use liquid/aerosol cleaners or

magnetic/static cleaning devices.

4D-Link DSL-2540B Quick Install Guide

Front Panel View

Status LED

A blinking light indicates

trafﬁc is passing through.

Power LED

A solid green light

indicates the unit

is powered up.

DSL LED

A Solid light indicates the DSL is synchronized. A

ﬂashing LED indicates the router is attempting to

synchronize with the DSL provider.

Internet LED

A solid green light indicates

that the router has an IP

address and is connected to

the internet.

Local Network LED

A solid light indicates a connection

to an Ethernet-enabled computer.

This LED blinks during data

transmission.

5 D-Link DSL-2540B Quick Install Guide

Rear Panel View

ON/OFF

Press this button to

turn the unit on or

off.

Power Receptor

Receptor for the supplied

power adapter.

DSL Line

Connect to an active

telephone line (RJ-11).

Reset

Pressing the Reset button restores

the router to its original factory

default settings.

LAN Port

Connect Ethernet devices such as

computers, switches, and hubs.

6D-Link DSL-2540B Quick Install Guide

Installing the Router

Connect the ADSL and Telephone Lines

• Connect an RJ-11 cable between the wall phone jack and the

line-end of the splitter (see diagram below).

• Attach another RJ-11 phone cable to the router-end of the splitter

and the ADSL port on the rear panel of the router.

• The phone-end of the splitter will be connected to the telephone

using a third RJ-11 phone cable.

Note: See connections on the installation diagram.

Connect the PC to the Router

• To use the Ethernet connection, connect the Ethernet cable from

the computer directly to the router. Connect one end of the Ethernet

cable to the port labeled LAN on the back of the router and attach

the other end to the Ethernet port of your computer.

• If your LAN has more than one computer, you can attach one

end of an Ethernet cable to a hub or a switch and the other to

the Ethernet port (labeled LAN) on the router. Note that either a

crossover or straight-through Ethernet cable can be used.The router

automatically recognizes the type of connection that is required.

7 D-Link DSL-2540B Quick Install Guide

Connect the Power Adapter

• Complete the process by connecting the supplied 12VAC, 1A power

adapter to the POWER connector on the back of the device and

plug the adapter into a wall outlet or power strip. Then turn on and

boot up your PC and any LAN devices, such as hubs or switches,

and any computers connected to them.

8D-Link DSL-2540B Quick Install Guide

Installation Diagram

9 D-Link DSL-2540B Quick Install Guide

Prior to accessing the router through the LAN or USB port, note the

following necessary conﬁgurations:

• Your PC’s TCP/IP address: 192.168.1.x(where “x” is any number

between 2 and 254)

• The router’s default IP address: 192.168.1.1

• Subnet mask: 255.255.255.0

Below are the procedures for conﬁguring your computer. Follow the

instructions for the operating system that you are using.

Conﬁguring Your Computer

Windows®2000

These are instructions for conﬁguring a Windows®2000 operating

system. If you are using Windows®XP please proceed to page 9.

1. In the Windows taskbar, click on the Start button and point to

Settings > Control Panel > Network and Dial-up Connections

(in that order).

2. Click on Local Area Connection. When you have the Local Area

Connection Status window open, click on Properties.

3. Listed in the window are the installed network components. If

the list includes Internet Protocol (TCP/IP), then the protocol has

already been enabled, and you can skip to Step 10.

4. If Internet Protocol (TCP/IP) does not appear as an installed

component, then click on Install.

5. In the Select Network Component Type window, click on Protocol

and then the Add button.

6. Select Internet Protocol (TCP/IP) from the list and then click OK.

10D-Link DSL-2540B Quick Install Guide

7. If prompted to restart your computer with the new settings, click

OK.

8. After your computer restarts, click on the Network and Dial-up

Connections icon again, and right click on the Local Area

Connection icon and then select Properties.

9. In the Local Area Connection Properties dialog box, select

Internet Protocol (TCP/IP) and then click on Properties.

10. In the Internet Protocol (TCP/IP) Properties dialog box, click in

the radio button labeled Use the following IP address and type

192.168.1.x (where “x” is any number between 2 and 254) and

255.255.255.0 in the IP address ﬁeld and Subnet Mask ﬁeld.

11. Click OK twice to save your changes and then close the Control

Panel.

Windows®XP

1. In the Windows taskbar, click on the Start button then go to

Control Panel and then click Network Connections.

2. In the Network Connections window, right click on the Local

Area Connection icon and click on Properties.

3. Listed in the Local Area Connection window are the installed

network components. Make sure the box for Internet Protocol

(TCP/IP) is checked and then click on Properties.

4. In the Internet Protocol (TCP/IP) Properties dialog box, click on

the radio button labeled Use the following IP address and type

192.168.1.x(where x is any number between 2 and 254) for the

IP address ﬁeld and 255.255.255.0 for the Subnet Mask ﬁeld.

5. Click on OK twice to save your changes and then close the Control

Panel.

Andere Handbücher für DSL-2540B - ADSL2/2+ Modem With EN Router

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DES-3226 Bedienungsanleitung

D-Link

D-Link DES-3010F Bedienungsanleitung

D-Link

D-Link DIR-600L Bedienungsanleitung

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Bedienungsanleitung

D-Link

D-Link DIR-610N+ Bedienungsanleitung

D-Link

D-Link DES-3010F Bedienungsanleitung

D-Link

D-Link DI-634M Bedienungsanleitung

D-Link

D-Link DIR-853 Bedienungsanleitung

D-Link

D-Link DVG-N5402SP Bedienungsanleitung

D-Link

D-Link DSL-6540U Bedienungsanleitung

D-Link

D-Link Amplifi DIR-657 Bedienungsanleitung

D-Link

D-Link DSL-125 Bedienungsanleitung

D-Link

D-Link WBR-1310 - Wireless G Router Bedienungsanleitung

D-Link

D-Link Xtreme N DIR-614 Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DES-7200 Bedienungsanleitung

D-Link

D-Link DSL-504T Bedienungsanleitung

D-Link

D-Link DES-3528 - xStack Switch - Stackable Handbuch

D-Link

D-Link DSR-500 Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DSL-2544N Bedienungsanleitung

D-Link

D-Link GLB-802C Bedienungsanleitung

D-Link

D-Link DES-1008D Bedienungsanleitung

D-Link

D-Link DIR-505L Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung