D-Link DSL-524B Bedienungsanleitung

Quick Installation Guide

DSL-524B Generation II

ADSL2+ Router

Before You Begin

Check Your Package Contents

Make sure you have all the necessary information and equipment on hand

before beginning the installation.

DSL-524B ADSL Modem

CD-ROM (containing Manual)

Ethernet (CAT5 UTP) Cable

Telephone Cable

Power Adapter

If any of the above items are missing, please contact your reseller

Connecting the Modem to Your Computer

A. First, connect the power adapter to the receptor at the back panel of the

DSL-524B and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of the cable into the Ethernet port on the back panel of the

DSL-524B and the other end of the cable to an Ethernet Adapter or available

Ethernet port on your computer.

ADSL Port

Use the ADSL cable to connect to the

your telephone line (RJ-11 port)

Ethernet Port

Use the Ethernet port to connect

the Router to a computer or an

Ethernet LAN

Power Insert

Use the adapter shipped with

the Router to connect to power

source

Power Button

Push in to power-on the Router.

Push again to power-off the Router

Reset Button

To manually reset, depress button with

the power on for at least seven seconds

Conguring the Modem

To use your Web browser to access the web pages used to setup the Modem, your computer must be

congured to “Obtain an IP address automatically”, that is, you must change the IP network settings of your

computer so that it is a DHCP Client. If you are using Windows XP and do not know how to change your

network settings, skip ahead to Appendix A and read the instructions provided. You may also read the User

Manual for instructions on changing IP settings for computers running Windows operating systems.

Open your Web browser and type

“http://192.168.1.1” into the URL address box.

Then press the Enter or Return key.

The Login page appears.

Type “admin” for the

in the Password eld. Click OK

Power Insert

Conguring the Modem (continued)

Click “WAN” on the left page, enter into “WAN Area Network (WAN) Setup” conguration page.

Click on the next connection which you want modify. Press “Add” button, enter the congure guide,

as following picture showed.

The value for VPI/VCI is assigned by your ISP. After inputting the PVC value, press “Next” to “Connection

Type”, as following picture showed.

Select “PPP over Ethernet (PPPoE)”, press “Next” entering the conguring interface, as following

picture showed.

Congure your PPP Username and Password from ISP. Then press “Next” to “Network Address

Translation Settings”, as following picture showed.

Press “Next” to enter into “WAN Setup - Summary”, click “Save” to save conguration, if you need

to modify the parameter, click “Back”, as following picture showed.

Conguring the Modem (continued)

To save the new settings, please access Management menu , click the Save/reboot button in the Save/

reboot menu. After a few seconds, the changes will be saved. The Modem will automatically establish the

Internet connection after a few more seconds.

Wait a few seconds for the Internet connection to be established and proceed to access the Internet via your web browser.

Click Save/reboot button to

save the new settings.

For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-

management interface; or to the manual located on the CD-ROM.

Use the following steps to congure a computer running Windows XP to be a DHCP client.

1. From the Start menu on your desktop, go to Settings, then click on Network Connections.

2. In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties.

Conguring IP Settings in Windows XP

Appendix

3. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP)

under “This connection uses the following items:” by clicking on it once. Click on the Properties button.

Right-click on the Local Area Connection

icon and Select the Properties option

from the pull-down menu.

Click Properties

Andere Handbücher für DSL-524B

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DIR-880L Bedienungsanleitung

D-Link

D-Link DES-1016D - Switch Bedienungsanleitung

D-Link

D-Link DVG-G1402S - Wireless Broadband VoIP Router Bedienungsanleitung

D-Link

D-Link DSL-2888A Bedienungsanleitung

D-Link

D-Link DWR-921E Bedienungsanleitung

D-Link

D-Link DSL-G225 Bedienungsanleitung

D-Link

D-Link DIR-455 Bedienungsanleitung

D-Link

D-Link DSL-2500U Bedienungsanleitung

D-Link

D-Link DES-3528 - xStack Switch - Stackable Handbuch

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Bedienungsanleitung

D-Link

D-Link DSL-520B Bedienungsanleitung

D-Link

D-Link DWR-112 Handbuch

D-Link

D-Link DIR-865L Bedienungsanleitung

D-Link

D-Link DSL-520T Bedienungsanleitung

D-Link

D-Link DSL-2870B Bedienungsanleitung

D-Link

D-Link DSL-500G Bedienungsanleitung

D-Link

D-Link GO-SW-5E Bedienungsanleitung

D-Link

D-Link DSR-500 Bedienungsanleitung

D-Link

D-Link DSR-150 Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DIR-651 Bedienungsanleitung

D-Link

D-Link DWR-932M Bedienungsanleitung

D-Link

D-Link DES-3526 - Switch - Stackable Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise