D-Link DSL-G225 Bedienungsanleitung

Andere Handbücher für DSL-G225

3

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DIR-806A Bedienungsanleitung

D-Link

D-Link DIR-827 Bedienungsanleitung

D-Link

D-Link DIR-855L Bedienungsanleitung

D-Link

D-Link DWR-956 Bedienungsanleitung

D-Link

D-Link DIR-806A Bedienungsanleitung

D-Link

D-Link Air DWL-810 Bedienungsanleitung

D-Link

D-Link AirPremier DWL-1800 Bedienungsanleitung

D-Link

D-Link DIR-615/T Bedienungsanleitung

D-Link

D-Link DIR-615 - Wireless N Router Bedienungsanleitung

D-Link

D-Link DSL-2544N Bedienungsanleitung

D-Link

D-Link DSL-514 Bedienungsanleitung

D-Link

D-Link Rangebooster N Router 650 DIR-635 Bedienungsanleitung

D-Link

D-Link DIR-820 Bedienungsanleitung

D-Link

D-Link DIR-809 Bedienungsanleitung

D-Link

D-Link xStack Bedienungsanleitung

D-Link

D-Link DSL-504T Bedienungsanleitung

D-Link

D-Link DGS-1510 Series Handbuch

D-Link

D-Link DSL-226 Bedienungsanleitung

D-Link

D-Link Ethernet Switches Bedienungsanleitung

D-Link

D-Link DSL-2641B - Wireless G Router Bedienungsanleitung

D-Link

D-Link DSL-3590L Bedienungsanleitung

D-Link

D-Link DWR-980 Bedienungsanleitung

D-Link

D-Link DIR-505 Bedienungsanleitung

D-Link

D-Link DSL-1501G Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

How to setup the DSL-G225

in Bridge Mode

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 2of 11

This guide is for DSL-G225 with firmware ver. 1.04.

Before proceeding with this setup please set your computer temporarily with a static IP address from

192.168.1.x range (e.g. 192.168.1.99):

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-

Link modem in the address bar: http://192.168.1.1.

When prompted, type in the Password. If you have not changed the password for the modem administration, the

factory password is “admin”.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 3of 11

There are two ways to setup your modem in Bridge Mode: using the Setup Wizard and using Manual

Configuration.

Setup using the Setup Wizard

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 4of 11

Step 2. Go to SETUP > Wizard > click on the “Setup Wizard” button.

Follow the steps in the Setup Wizard.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 5of 11

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Set Protocol to “Bridge”.

It is recommended to disable the modem’s Wi-Fi:

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 6of 11

Click on “Save/Apply” to finish the Setup Wizard. The setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 7of 11

Manual Setup

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 8of 11

Step 2. Go to SETUP > Internet Setup.

If there are any existing profiles listed in the WAN Setup table, delete them.

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Click on “Add”.

Set Protocol to “Bridging” and click on Next.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 9of 11

Click on “Apply” to finish the setup. The modem setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 10 of 11

Please note that in Bridge Mode the DSL-G225 modem acts as a transparent device. If your Internet

provider requires PPPoE authentication or VLAN tagging, you need to enable these options on the device

connected to the LAN port of the DSL-G225 modem.

After successful VDSL sync