D-Link DSL-G604T Bedienungsanleitung
©2004 D-Link Australia. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DSL-G604T
Wireless ADSL Router 1
•ADSL Cable (standard telephone cable)
•DSL-G604T
shown with antenna and stand
•Ethernet Cable
(CAT5 UTP Straight-Through)
•12V, 1.2A
Power Adapter
Before You Begin
1. If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service
Provider (ISP).
2. It’s best to use the same computer that is connected to your router for configuring the
DSL-G604T Wireless ADSL Router. The DSL-G604T acts as a DHCP server and will
assign all the necessary IP address information on your network. See atthe Quick
Installation Guide or the Manual on the CD-ROM for setting each network adapter to
automatically obtain an IP address.
Check Your Package Contents
If any of the above items is missing, please contact your reseller.
This product can be setupusing
any current web browser, i.e.,
InternetExplorer6orNetscape
Navigator 6.2.3. DSL-G604T
Wireless ADSL Route
r
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.
•CD-Rom
containing Manual and Warranty
2
Connecting the Router to your Computer
A. First, connect the power adapter to the power input at the back
panel of the DSL-G604T and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of the
device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port
on the back panel of the DSL-G604T and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert the telephone cable included with the Router into the
ADSL port, then connect the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
Power Input
Connect to AC
Adapter
Reset
Push to return to
factory settings
LAN Ports
Connect to the
LAN and other
computers
A
DSL Port
Connect to your
ADSL provider
A
ntenna
Ensures good
wireless reception
3
Configure IP Settings
For Microsoft Windows XP
To connect to the network, make sure the network adapter in
your computer is configured properly. Here’s how to configure
the network adapter to obtain an IP address automatically for
the DSL-G604T Wireless ADSL Router.
Go to Start > select
Settings > click
Control Panel >
Double-click on the
Network
Connections icon
Double-click on
Network Connections
Right-click the
Local Area
Connection icon,
and then select
Properties.
Select Properties
4
The dialog box displays with a
list of currently installed
network items.
Click Internet Protocol
(TCP/IP)
Make the choice to get IP
settings assigned
automaticall
y
.
Select Obtain an IP address
automatically
Click OK
Click Properties
5
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-
equipped computers to the LAN ports on the back panel of the DSL-
G604T.
When you have completed the steps in this Quick Installation Guide,
your connected network should look similar to this:
Connecting Additional Computers
To The DSL-G604T
Wireless ADSL Router
6
Configuring the Router
To use your Web browser to access the web pages used to setup the
Router, your computer must be configured to “Obtain an IP address
automatically”, that is, you must change the IP network settings of your
computer so that it is a DHCP Client. If you are using Windows XP and
do not know how to change your network settings, skip ahead to
Appendix at the back and read the instructions provided. You may also
read the User Manual for instructions on changing IP settings for
computers running Windows operating systems.
The Login page appears
Open your Web browser and type
http://10.1.1.1 into the URL address
box. Press Enter or Return.
When you first log in, your Login Name
is admin; your password is also
admin. These may be changed later.
7
Configuring the Router cont…
Once you have logged in, the Home directory tab is prominent with the
Setup Wizard menu displayed. Most users will be able to use the Setup
Wizard to establish the ADSL connection to your ADSL Internet Service
Provider (ISP). To begin using the Setup Wizard, click on the Run
Wizard button in the middle of the web page. A pop-up menu will appear.
This pop-up menu is the Setup Wizard. The Setup Wizard procedure
consists of five general steps:
1. Set your new password
2. Choose your time zone
3. Set Internet connection
4. Set Wireless LAN
5. Save & Restart
When you setup the Internet connection, you will need to enter the
information provided to you from your ISP. The type of information you
need depends on the type of connection you are setting up.
Click the Run Wizard button.
8
Configuring the Router cont…
The first Setup Wizard menu lists a summary of the steps required to
complete the setup. Click the Next button to begin setup.
Click the Next button.
9
Configuring the Router cont…
Set the new Password used by the administrator to configure the Router.
You have already used the default Password “admin” to access the web
manager. You can choose another Password. The login User Name
“admin” cannot be changed. Type in the new Password and type it a
second time to Verify Password. Click Next to continue.
Type the new Password used by
the Router administrator and type
it again in Verify Password.
Click the Next button.
10
Configuring the Router cont…
Now configure the Time Zone used for the Router’s system clock. Select
the appropriate time zone and Daylight Saving Time setting for your
location.
Next you will Set the Internet Connection Type for the WAN interface.
Your ISP should have given this information to you. If you do not know
what type of connection to use, exit the Setup Wizard and contact your
ISP for the information. The Setup wizard menu that appears when you
click the Next button depends on what connection type you select.
Select the Time Zone you are
located and set the appropriate
Daylight Savings Time (On/Off).
Click the Next button.
Andere Handbücher für DSL-G604T
17
Inhaltsverzeichnis
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link TM DES-6500 Bedienungsanleitung
D-Link
D-Link HorstBox DVA-G3342SD Bedienungsanleitung
D-Link
D-Link DSL-1500G Bedienungsanleitung
D-Link
D-Link DIR-2150 Bedienungsanleitung
D-Link
D-Link DES-6000 Series Bedienungsanleitung
D-Link
D-Link DVG-7044S Bedienungsanleitung
D-Link
D-Link Express EtherNetwork DI-604 Bedienungsanleitung
D-Link
D-Link DSL-2650NRU Bedienungsanleitung
D-Link
D-Link DSL-2740U Bedienungsanleitung
D-Link
D-Link G413K Bedienungsanleitung
D-Link
D-Link DSL-504 Bedienungsanleitung
D-Link
D-Link AC1900 Bedienungsanleitung
D-Link
D-Link SharePort DIR-825 Bedienungsanleitung
D-Link
D-Link DWR-926 Bedienungsanleitung
D-Link
D-Link Covr Bedienungsanleitung
D-Link
D-Link EXO AX DIR-X1870 Bedienungsanleitung
D-Link
D-Link DWR-921 Bedienungsanleitung
D-Link
D-Link DIR-825M Bedienungsanleitung
D-Link
D-Link DES-3010F Bedienungsanleitung
D-Link
D-Link DFL-260 - NetDefend - Security Appliance Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise