D-Link DSL-G604T Bedienungsanleitung

respective holders. Software and specifications subject to change without notice.

DSL-G604T ADSL Modem Router.

Before You Begin

1. If you purchased this Router to share your high-speed Internet connection with other

computers, you must have an established Internet account from an Internet Service Provider

(ISP).

2. It is best to use the same computer that is connected to your ISP for configuring the DSL-

G604T ADSL Modem Router. The DSL-G604T acts as a DHCP server and will assign all the

necessary IP address information on your network. See the Appendix for setting each

network adapter to automatically obtain an IP address.

Check Your Package Contents

If any of the above items are missing, please contact your reseller.

This product can be setup using

any current web browser, i.e.,

InternetExplorer6orNetscape

Navigator 6.2.3.

Using a power adapter with

a different voltage rating will

damage and void the

warranty for this product.

DSL-G604T Generation II

Wireless ADSL2+ Modem Route

CD-ROM with Click’n Connect Utility and

Product Documentation

Wireless Antenna

Telephone Cable (RJ-11)

CAT 5 UTP Ethernet Cable (RJ-45)

12V 1.25A

Power Adapter

DSL-G604T

DSL Modem Route

Connecting the Router to your

Computer

1. First, connect the power adapter to the power input at the back

panel of the DSL-G604T and then plug the other end of the

power adapter to a wall outlet or power strip. On the front of

the device, the Power LED will turn ON to indicate proper

operation.

2. Insert one end of the Ethernet cable into an Ethernet port on

the back panel of the DSL-G604T and the other end of the

cable to an Ethernet Adapter or available Ethernet port on your

computer.

3. Insert the telephone cable included with the Router into the

ADSL port, and then connect the cable to your telephone line.

(Line must be activated for ADSL use)

4. Check the LED display on the front of the Router to confirm

that the connections have been made. (This will be shown with

solid lights for the corresponding port)

ADSL Port

Connect to

your ADSL

hone line

Antenna

Post

Connect

antenna here

Ethernet Ports

Connect to

Ethernet cable

Power Input

Connect to

ower ada

ter

Configuring the Router via the

D-Link Click’n Connect Utility

Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should

appear automatically. If it does not appear, explore your CD-ROM drive within

Windows, and double-click on the file “dslutility.exe” to start the utility

manually.

You can select one of five options:

1. User Manual: This option will open up the DSL-G604T user manual.

You will need Adobe Acrobat Reader installed to view the manual.

2. Quick Install Guide: This option will show you a software-based version

of this Quick Install Guide

3. Install Acrobat Reader: Selecting this option will install Adobe Acrobat

Reader onto your PC.

4. Technical Support: Selecting this option will link you to D-Link

Australia/New Zealand Technical Support online.

5. Start Installation: This will commence the installation of the DSL-

G604T.

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 1 - Power Up the Device

Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the

Status LED to blink before proceeding onto the next step.

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 2 – Connect the Device to your Computer

Connect the Ethernet cable from the computer to one of the LAN ports

(numbered 1 to 4) on the DSL-G604T now. Wait for the LAN Link LED for the

corresponding LAN port number to flash, then click on Next to continue to Step

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 3 – Connect the Device to the ADSL Line

Connect your ADSL telephone line from the wall socket to the DSL-G604T

ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will

need to connect the telephone line from the DSL socket on the filter to the DSL-

G604T ADSL socket.

Once you have completed this, wait for the ADSL LED to light up, and click on

Next to continue to Step 4.

Follow the on-

screen

instructions,

then Click

Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 4 – Checking Device Connectivity

The Click’n Connect utility will now check the DSL-G604T to make sure it has

been connected correctly. Once it has successfully detected your modem, it will

proceed to the next step automatically.

At this point, you may want to prepare your ADSL account information that is

provided to you by your Internet Service Provider (ISP) as you will require it

shortly.

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 5 – ISP Configuration

You will now be prompted to select your Country as well as your Internet

Service Provider (ISP). If your ISP is not listed for your country, select Other

and enter the details that are relevant to your ISP.

Once you have completed this step, click on Next to continue onto Step 6.

Click Next to

continue

Select your

ISP

Select your

Country

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 6 – Account Configuration

At this step, you will be required to enter your ADSL account Username, as

provided by your ISP. You will also be required to enter your ADSL account

Password, then reenter the password in the Confirm Password box.

Please note, different ISP’s use different Usernames. Some use the first part of

your email address while some ISP’s use part or all of your email address. If

you are unsure as to which one your ISP uses, please confirm this with your

ISP.

Once you have completed this step, click on Next to continue onto Step 7.

Enter your ISP Username

Enter your ISP Password

Re-Enter

our ISP Password

Click Next to

continue

Configuring the Router via the

D-Link Click’n Connect Utility

The Click’n Connect utility will guide you through the installation process step-

by-step. Follow the on-screen instructions, then proceed to the next step.

Step 7 – Set Wireless Connection

You will now be asked if you would like to enable your Wireless Radio. The

wireless radio is what the router uses to provide wireless networking

functionality to your wireless computers. If you would like to turn the radio on,

select Enabled to turn it on, otherwise select Disabled to turn the radio off.

You can turn the radio on or off at a later date by referring to your User Manual.

Once you have completed this step, click Next to continue. If you Enabled

your wireless radio, proceed to step 7A on Page 10. If you Disabled your

wireless radio, proceed to Step 8 on Page 11.

Select your

Wireless Radio

Preference

Click Next to

continue

Andere Handbücher für DSL-G604T

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DIR-878 Bedienungsanleitung

D-Link

D-Link DIR-815 Bedienungsanleitung

D-Link

D-Link DSL-2640U Bedienungsanleitung

D-Link

D-Link DVA-G3670B Bedienungsanleitung

D-Link

D-Link DES-1005D Bedienungsanleitung

D-Link

D-Link DSL-2600U Bedienungsanleitung

D-Link

D-Link DSL-2500U Bedienungsanleitung

D-Link

D-Link DSL-6740U Bedienungsanleitung

D-Link

D-Link 2Voice + 4SW VoIP Router DVG-1402S Bedienungsanleitung

D-Link

D-Link Amplifi DIR-657 Bedienungsanleitung

D-Link

D-Link DSL-502T Bedienungsanleitung

D-Link

D-Link DES-1016D - Switch Bedienungsanleitung

D-Link

D-Link DIR-130 - Broadband VPN Router Einrichtungshandbuch

D-Link

D-Link DIR-625 Router Bedienungsanleitung

D-Link

D-Link DI-1162 Bedienungsanleitung

D-Link

D-Link DIR-806A Bedienungsanleitung

D-Link

D-Link DSL-502T Bedienungsanleitung

D-Link

D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Bedienungsanleitung

D-Link

D-Link DWR-921 Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DES-1005 Bedienungsanleitung

D-Link

D-Link xStack DES-3810 Handbuch

D-Link

D-Link DIR-615 - Wireless N Router Bedienungsanleitung

D-Link

D-Link DSL-3782 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise