D-Link DVG-N5402G/ACF Bedienungsanleitung

Quick Installation Guide

DVG-N5402G/ACF

Wireless AC1200 Dual Band Gigabit Router

ith Fiber WAN Port, 3G/LTE Support, 2 FXS

Ports, 1 PSTN (lifeline) Port, and USB Port

DVG-N5402G/ACF Quick Installation Guide

BEFO E YOU BEGIN

Delivery Package

•Router DVG-N5402G/ACF

•Power adapter DC 12V/2A

•Ethernet cab e (CAT 5E)

•Two RJ-11 te ephone cab es

•“Quick Installation Guide” (brochure).

If any of the items are missing, p ease contact your rese er.

The “User Manual” and “Quick Installation Guide” documents are avai ab e

on D-Link website (see www.d ink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

DVG-N5402G/ACF Quick Installation Guide

Default Settings

Domain name of device dlinkrouter.local.

IP address of device 192.168.8.254

Username (login) admin

Password admin

Name of wireless

network (SSID)

2.4GHz DVG-N5402G

5GHz DVG-N5402G-5G

Network key (PSK password)

see WPS PIN on the barcode

abe on the bottom pane of

the device

Router DVG-N5402G/ACF with defau t settings cannot connect to the

Internet. To get started, p ease set your own password for access to the

web-based interface and change the WLAN name (SSID); then, if

needed, configure other settings recommended by your ISP.

DVG-N5402G/ACF Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router:

◦App e Safari 8 and ater

◦Goog e Chrome 48 and ater

◦Microsoft Internet Exp orer 10 and ater

◦Microsoft Edge 20.10240 and ater

◦Mozi a Firefox 44 and ater

◦Opera 35 and ater.

•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wire ess network.

•SFP transceiver to connect to a fiber optic ine.

•Ana og phone.

•A USB modem (when it is necessary to connect to the Internet via mobi e

operators' networks)1.

Your USB modem shou d be equipped with an active SIM card of your

operator.

Some operators require subscribers to activate their USB modems prior

to using them. P ease, refer to connection guide ines provided by your

operator when conc uding the agreement or p aced on its website.

For some mode s of USB modems, it is required to disab e the PIN

code check on the SIM card prior to connecting the USB modem to the

router.

1 Contact your operator to get information on the service coverage and fees.

DVG-N5402G/ACF Quick Installation Guide

CONNECTING TO PC

PC with Ethernet Adapter

1. Connect an Ethernet cab e between any of LAN ports ocated on the back

pane of the router and the Ethernet port of your PC.

2. To connect via USB modem: connect your USB modem to the USB port2

ocated on the back pane of the router.

!In some cases you wi need to reboot the router after connection of the

USB modem.

3. To connect the device to a fiber optic line: connect your SFP transceiver

to the SFP port, then connect the fiber optic cab e to the SFP transceiver.

4. To connect the device to an Ethernet line: in the web-based interface of

the router, se ect the router's LAN port that wi be used as the WAN port

and create an Ethernet WAN connection. Then connect an Ethernet cab e

between an avai ab e Ethernet port of the router and the Ethernet ine.

!P ease connect the router to the ISP's Ethernet ine on y after setting the

WAN port and creating the Internet connection.

5. Connect the power cord to the power connector port on the back pane of

the router, then p ug the power adapter into an e ectrica out et or power

strip.

6. Turn on the router by pressing the ON/OFF button on its back pane .

Then make sure that your PC is configured to obtain an IP address automatica y

(as DHCP c ient).

2 It is recommended to use a USB extension cab e to connect a USB modem to the

router.

DVG-N5402G/ACF Quick Installation Guide

Obtaining P Address Automatically

(OS Windows 7)

1. C ick the Start button and proceed to the Control Panel window.

2. Se ect the Network and Sharing Center section. (If the Contro Pane

has the category view (the Category va ue is se ected from the View by

drop-down ist in the top right corner of the window), choose the View

network status and tasks ine under the Network and Internet

section.)

3. In the menu ocated on the eft part of the window, se ect the Change

adapter settings ine.

4. In the opened window, right-c ick the re evant Local Area Connection

icon and se ect the Properties ine in the menu disp ayed.

5. In the Local Area Connection Properties window, on the

Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)

ine. C ick the Properties button.

DVG-N5402G/ACF Quick Installation Guide

6. Make sure that the Obtain an IP address automatically and Obtain

DNS server address automatically choices of the radio buttons are

se ected. C ick the OK button.

7. C ick the OK button in the connection properties window.

DVG-N5402G/ACF Quick Installation Guide

PC with Wi-Fi Adapter

1. To connect via USB modem: connect your USB modem to the USB port3

ocated on the back pane of the router.

!In some cases you wi need to reboot the router after connection of the

USB modem.

2. To connect the device to a fiber optic line: connect your SFP transceiver

to the SFP port, then connect the fiber optic cab e to the SFP transceiver.

3. To connect the device to an Ethernet line: in the web-based interface of

the router, se ect the router's LAN port that wi be used as the WAN port

and create an Ethernet WAN connection. Then connect an Ethernet cab e

between an avai ab e Ethernet port of the router and the Ethernet ine.

!P ease connect the router to the ISP's Ethernet ine on y after setting the

WAN port and creating the Internet connection.

4. Connect the power cord to the power connector port on the back pane of

the router, then p ug the power adapter into an e ectrica out et or power

strip.

5. Turn on the router by pressing the ON/OFF button on its back pane .

6. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern

notebooks with bui t-in wire ess NICs are equipped with a button or

switch that turns on/off the wire ess adapter (refer to your PC documents).

If your PC is equipped with a p uggab e wire ess NIC, insta the software

provided with your Wi-Fi adapter.

Then make sure that your Wi-Fi adapter is configured to obtain an IP address

automatica y (as DHCP c ient).

3 It is recommended to use a USB extension cab e to connect a USB modem to the

router.

DVG-N5402G/ACF Quick Installation Guide

Obtaining P Address Automatically and

Connecting to Wireless Network (OS Windows 7)

1. C ick the Start button and proceed to the Control Panel window.

2. Se ect the Network and Sharing Center section. (If the Contro Pane

has the category view (the Category va ue is se ected from the View by

drop-down ist in the top right corner of the window), choose the View

network status and tasks ine under the Network and Internet

section.)

3. In the menu ocated on the eft part of the window, se ect the Change

adapter settings ine.

4. In the opened window, right-c ick the re evant Wireless Network

Connection icon. Make sure that your Wi-Fi adapter is on, then se ect

the Properties ine in the menu disp ayed.

5. In the Wireless Network Connection Properties window, on the

Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)

ine. C ick the Properties button.

DVG-N5402G/ACF Quick Installation Guide

6. Make sure that the Obtain an IP address automatically and Obtain

DNS server address automatically choices of the radio buttons are

se ected. C ick the OK button.

7. C ick the OK button in the connection properties window.

8. To open the ist of avai ab e wire ess networks, se ect the icon of the

wire ess network connection and c ick the Connect To button or eft-

c ick the network icon in the notification area ocated on the right side of

the taskbar.

Andere Handbücher für DVG-N5402G/ACF

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-2640B Bedienungsanleitung

D-Link

D-Link DSL-2520U Bedienungsanleitung

D-Link

D-Link AirPlus DWL-810+ Bedienungsanleitung

D-Link

D-Link DSR-250N Bedienungsanleitung

D-Link

D-Link DSL-2750E Bedienungsanleitung

D-Link

D-Link DSL-2543B Bedienungsanleitung

D-Link

D-Link DIR-1750 Bedienungsanleitung

D-Link

D-Link DES-2218 Bedienungsanleitung

D-Link

D-Link DES-3226L Bedienungsanleitung

D-Link

D-Link XTREME N DIR-655 Bedienungsanleitung

D-Link

D-Link DSL-3788 Bedienungsanleitung

D-Link

D-Link DSL-2520U Bedienungsanleitung

D-Link

D-Link DES-1050G Bedienungsanleitung

D-Link

D-Link G403 Bedienungsanleitung

D-Link

D-Link DIR-1260 Bedienungsanleitung

D-Link

D-Link DSL-124 Bedienungsanleitung

D-Link

D-Link DFL-1500 Bedienungsanleitung

D-Link

D-Link DWR-555 Bedienungsanleitung

D-Link

D-Link DWM-312W Bedienungsanleitung

D-Link

D-Link DIR-610N+ Bedienungsanleitung

D-Link

D-Link DAP-1325 Bedienungsanleitung

D-Link

D-Link DIR-600 Bedienungsanleitung

D-Link

D-Link dgs-8000 SERIES Handbuch

D-Link

D-Link Mini 3G 21 Mbps Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise