D-Link DWR-M921 Bedienungsanleitung

4G LTE ROUTER

DWR-M921

QUICK

INSTALLATION

GUIDE

DWR-M921

ENGLISH

CONTENTS OF

PACKAGING

CONTENTS

4G LTE ROUTER

DWR-M921

12V 1A POWER ADAPTER

ETHERNET CABLE (CAT5 UTP)

CONNECT THE ROUTER TO YOUR PC DURING SETUP

If any of these items are missing from your packaging

contact your reseller

DWR-M921 3

ENGLISH

PRODUCT

SETUP

HARDWARE SETUP

Ensure that your DWR-M921 Mobile Router is powered off before performing the steps below.

1. Flip the router around and open the lid at the bottom of the router.

2. Gently press down and slide the silver SIM card holder to the right (OPEN ) & open the flap.

3. Insert a standard USIM card into the SIM card holder with the gold contacts facing downward.

4. Close the flap and slide the SIM card holder back to the left ( LOCK) to lock it. Close the lid.

5. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-M921 Mobile Router,

and the other end into an Ethernet port on a computer to configure the unit.

Note:

crossover Ethernet cables can be used.

IP ADDRESS: http://192.168.0.1 USERNAME: admin

adminPASSWORD:

Note:

The DWR-M921 Mobile Router LAN Ports are “Auto-MDI/MDIX.” Therefore, patch or

The 4G connection can also be used as a backup WAN. Once a backup is configured.

ADVANCED SETUP (ACCESS VIA IP ADDRESS)

Open a browser window and enter the below IP address into the browser address field.

6. Connect the power adapter to the socket on the back panel of your DWR-M921 Mobile Router and

plug the other end of the power adapter into a wall outlet or power strip.

a. Turn ON the router. The Power LED will light up to indicate that power is being supplied to the router.

c. The initialization process takes about 45 seconds to a minute.

b. After a few moments, if a connection has been established, the following LEDs will turn

solid blue: Power, LAN 1-4 (depending on which port your Ethernet cable has been

connected to), Wi-Fi, LTE and WAN (if connection is used).

DWR-M921

ENGLISH

TROUBLESHOOTING

1. HOW DO I CONFIGURE MY DWR-M921 ROUTER OR CHECK MY WIRELESS NETWORK

NAME (SSID) AND WIRELESS PASSWORD (WPA KEY)?

- Connect your PC to the router using an Ethernet cable.

- Open a web browser and enter the router's IP address: http://192.168.0.1

- Log into the router using the default username admin, the default password is admin.

Note: If you have changed the password and cannot remember it, you will need to reset the

router to factory defaults.

2. HOW DO I RESET MY DWR-M921 ROUTER TO FACTORY DEFAULT SETTINGS?

- Ensure the router is powered on. If you cannot remember your router administrator password,

you may press and hold the reset button on the side of the router for about 10 seconds.

Note:

in question 1 and reconfigure your router through the GUI.

3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY

WIRELESS NETWORK NAME (SSID) OR WIRELESS PASSWORD (WPA KEY)?

- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the

correct Wireless Network Name (SSID) and Wireless Password (WPA key).

- Use the web based user interface (as described in question 1 above) to check or choose

your wireless settings.

- Make sure you write down these settings so that you can enter them into each wirelessly

4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?

- If connecting using a 4G mobile connection, make sure that you are within the network coverage

- If connecting using the WAN via ADSL/Fibre service, make sure the modem has been enabled/

TECHNICAL SUPPORT

SETUP AND CONFIGURATION PROBLEMS

South Africa (Mon-Sun) website: www.d-link.co.za | FTP: ftp://ftp.d-link.co.za/

Hotline no: 08600 DLINK (35465) | Office no: 012 741 2000

Technical support email: [email protected]

Operating Hours:

Mon - Fri 08:30 - 16:30

- Once logged in, you can configure your router through the GUI.

Resetting the router to factory default will erase the current configuration. Log in as outlined

connected PC.

of your SIM card provider, and that the service has been correctly configured.

connected and is operational, and that the service is correctly configured.

Basic Phone Support Hours:

Mon - Fri 08:00 - 21:00

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DES-3624 - Switch - Stackable Bedienungsanleitung

D-Link

D-Link DSL-504G Bedienungsanleitung

D-Link

D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... Bedienungsanleitung

D-Link

D-Link DES-5016 Bedienungsanleitung

D-Link

D-Link 504T Bedienungsanleitung

D-Link

D-Link GO-SW-5E Bedienungsanleitung

D-Link

D-Link DIR-859 Bedienungsanleitung

D-Link

D-Link DI-300 series Bedienungsanleitung

D-Link

D-Link DIR-655 - Xtreme N Gigabit Router Wireless Bedienungsanleitung

D-Link

D-Link DES-1005F Bedienungsanleitung

D-Link

D-Link COVRAX COVR-X1860 Bedienungsanleitung

D-Link

D-Link DVG-7044S Bedienungsanleitung

D-Link

D-Link DSL-560I Bedienungsanleitung

D-Link

D-Link DSL-G684T Bedienungsanleitung

D-Link

D-Link DSL-504T Bedienungsanleitung

D-Link

D-Link DGS-3000-10TC Handbuch

D-Link

D-Link DES-1250G Bedienungsanleitung

D-Link

D-Link TM DES-6500 Bedienungsanleitung

D-Link

D-Link DWR-953 Bedienungsanleitung

D-Link

D-Link DSR-250N Bedienungsanleitung

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Bedienungsanleitung

D-Link

D-Link COVR-C1203 Bedienungsanleitung

D-Link

D-Link DIR-819 Bedienungsanleitung

D-Link

D-Link Amplifi DHP-1565 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise