D-Link DXN-W224 Bedienungsanleitung

Quick Start Guide

WECB

Version 1.0

Wireless Ethernet Coaxial Bridge

DXN-W224 Quick Start Guide

WECB

Minimum Requirements

•Windows® 8, 7, Vista®, or XP; Mac OS® X (10.5 or higher)

•An installed Ethernet adapter (10/100/1000)

•Any device that has a WiFi adapter. I.E. Xbox, IPad, IPhone

Package

Contents

Wireless Ethernet Coaxial Bridge (WECB) COAX Cable

Power Adapter Stand Splitter

DXN-W224 Quick Start Guide

Front Panel

Power MoCA

2.4

GHz

LAN1

LAN2

5 GHz

Power LED

A solid light indicates the device is receiving power.

MoCA LED

A solid light indicates the device has formed a network over the coaxial

cable with at least one other MoCA device (Wireless Gateway 2). The LED

will blink during data transmission.

2.4 GHz LED

A solid light indicates the 2.4 GHz Wi-Fi network is ready.

5 GHz LED

A solid light indicates the 5 GHz Wi-Fi network is ready.

LAN LEDs (1-2)

A solid light indicates a connection on the Ethernet port. The LED will blink

during data transmission.

DXN-W224 Quick Start Guide

Back

Panel

Reset Button

LAN Ports

Cable Out

Cable In

Power Port

Reset Button

Press and hold the reset button with a paper clip for 15 seconds to reset the

WECB to the factory default settings. Do not unplug the power during this

process.

LAN Ports (1-2)

Connect Ethernet devices such as computers, media players, and game

consoles using a CAT5 cable (not included)

Cable Out

Connect one end of thecoaxial cable to the Cable Out port and the other

end to your Wireless Gateway 2 or the COAX IN port on your set-top box.

Cable In

Connect one end of anothercoaxialcable to the Cable In port and the other

end to the cable outlet on the wall.

Power Port

Connect the supplied power adapter to power your WECB.

DXN-W224 Quick Start Guide

Hardware Installation

1. Power

Plug the WECB’s power adapter into an AC wall outlet or power strip.

Note: Power source is confirmed when the Power LED indicator on the front panel is lit.

2. Connect the Ethernet Cable

Connect one end of the included Ethernet cable to the LAN port located on the WECB’s back

panel and attach the other end to your network or computer.

3. Connect the Coaxial Cable

Connect one end of the coaxial cable to the Cable port located on the WECB’s back panel

and attach the other end to your cable outlet inside the house or directly to the Wireless

Gateway 2.

Note: There is no MoCA mode switch for configuration on the WECB.

DXN-W224 Quick Start Guide

Software Installation

D-Link WECB has a web-based configuration utility to allow control over certain coaxial

networking parameters. The unit is shipped with default parameters that will allow operation on

most coaxial network without any additional configuration.

Note: If you are connecting to a Wireless Gateway 2, it will automatically configure the settings on

your WECB.

However, if a special network security password is required or if a specific channel operating

frequency is required, then the default parameters will need to be

modified.

Use the Wireless

Gateway’s web interface (Admin Tool) at http://10.0.0.1 to make any changes.

Web-based Configuration Utility

To access WECB’s configuration utility, open a web-browser (such as Internet Explorer) and

enter the default IP address of the WECB (192.168.0.50). If you are connected to the Wireless

Gateway 2 via Coax cable, then you will have to log in using the IP address assigned by the DHCP

server.

Example: (http://10.0.0.x) where“x”is something other than“1”

Select “User”from the User Name drop-down menu and then enter your password (“Null” by

default):

Note: The WECB will configure itself automatically when connected to a compatible Wireless

Gateway 2.

Andere Handbücher für DXN-W224

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DIR-819 Bedienungsanleitung

D-Link

D-Link D-Link Bedienungsanleitung

D-Link

D-Link DVX-7090 Bedienungsanleitung

D-Link

D-Link DWR-920 Betriebsanleitung

D-Link

D-Link DSL-502T Bedienungsanleitung

D-Link

D-Link NetDefend DFL-260E Bedienungsanleitung

D-Link

D-Link DSL-2500U Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link DSL-2540U Bedienungsanleitung

D-Link

D-Link DKT-710 Bedienungsanleitung

D-Link

D-Link DIR-815 Bedienungsanleitung

D-Link

D-Link DVG-N5402SP Bedienungsanleitung

D-Link

D-Link DSL-520T Bedienungsanleitung

D-Link

D-Link DIR-600 Bedienungsanleitung

D-Link

D-Link DSL-2640B Bedienungsanleitung

D-Link

D-Link DIR-300 - Wireless G Router Bedienungsanleitung

D-Link

D-Link 502G - DSL Router - EN Bedienungsanleitung

D-Link

D-Link DIR-842V2 Bedienungsanleitung

D-Link

D-Link DSL-2640B Bedienungsanleitung

D-Link

D-Link DWR-961 Bedienungsanleitung

D-Link

D-Link xStack DES-3200 Series Bedienungsanleitung

D-Link

D-Link DES-1005D Bedienungsanleitung

D-Link

D-Link DSS-24+ Bedienungsanleitung

D-Link

D-Link DES-1228/ME Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise