D-Link Express EtherNetwork DI-704UP Bedienungsanleitung
1
This product can be set up
using any current Web browser,
i.e.,Internet Explorer or
Netscape Navigator.
DI-704UP
Ethernet Broadband Router
and USB Print Server
5V AC Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-704UP. 08152003
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It is best to use the same computer that is connected to your modem for
configuring the DI-704UP Broadband Router. The DI-704UP acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
DI-704UP Ethernet Broadband Router
and USB Print Server
CD-ROM (containing Manual, Warranty and
Print Server Software for Windows)
Ethernet (Straight-Through) Cable
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
2
Connecting The DI-704UP Broad-
band Router To Your Network
B. WAN Port This is for the
connection of an Ethernet cable
to the Cable or DSL modem
C. LAN Ports These are the
connections for Ethernet cables
to Ethernet enabled computers.
D. USB Printer Port
You can connect a USB
Printer here.
A. Receptor for
Power Adapter.
Reset Button Pressing this
button restores the Router to its
original factory default settings.
A. First, connect the power adapter to the receptor at the back panel of the
DI-704UP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED lights up indicating proper operation.
B. 1. Power off your Cable or DSL modem; the devices that do not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-704UP should
be powered on and the Cable / DSL modem should be turned off. Cable / DSL
modem (Power Off) – DI-704UP (Power On)
2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable / DSL
modem by turning on the unit or plugging in the power adapter. Cable / DSL
modem (Power On) – DI-704UP (Power On)
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-704UP. The WAN LED light will illuminate to indicate proper connection.
If the WAN LED is not illuminated, please go back to step B1 and repeat the
steps.
C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-704UP and an
available Ethernet port on the network adapter in the computer you are using to
configure the DI-704UP. The LED light for LAN Port 1 illuminates to indicate proper
connection. (Note: The LAN Ports on the DI-704UP are Auto-MDI/MDIX. Meaning
you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)
D. The USB port on the DI-704UP is used to connect USB printers only. Connect
one end of the printer cable to your printer and the other end to the DI-704UP.
3
Restart Your Computer
Connecting Additional Computers To
The DI-704UP
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-704UP
LOCAL NETWORK LEDs – a solid
light on the port indicates a
connection to an Ethernet enabled
computer on ports 1-4. This LED
blinks during data transmission.
POWER LED – a solid light
indicates a proper connection to
the power supply.
Status LED – flashes
consistently to indicate
that the DI-704UP is
working properly.
Printer LED – a solid
light indicates that
Printer connection has
been established.
WAN LED – a solid light
indicates connection on the
WAN port. This LED blinks
during data transmission.
4
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen appears.
Open your Web browser and type
“http://192.168.0.1” into the URL address
box. Then press the Enter or Return key.
Type “admin” for the username and
leave the password field blank.
Click OK
5
The Setup Wizard (continued)
Once logged in, the Home screen
appears.
You will see the following screens
Set up your new password.You have the
option to establish a password.
Click Run Wizard
Click Next
Click Next
6
The Setup Wizard (continued)
Select your Internet Connection.
If you are unsure of which setting to select,
please contact your Internet Service Provider.
Choose your time zone from the drop
down list.
Click Next
Click Next
The Router will attempt to auto-detect your
Internet connection and bring up the appro-
priate screen.
If it cannot auto-detect the Internet connec-
tion, the WAN selection screen appears.
7
The Setup Wizard (continued)
If your ISP requires a Static IP Address, and
this option is selected, then this screen
appears:
If your ISP uses PPPoE (Point-to-Point
Protocol over Ethernet), and this option is
selected, then this screen appears. (Used
mainly for DSL Internet service.)
Enter the IP address information originally
provided to you by your ISP. Make sure all
required fields are completed.
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and password pro-
vided to you by your ISP.
If you selected Dynamic IP Address, this
screen appears: (Used mainly for Cable
Internet service.)
Click the “Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click Next
This setup should be done on the computer
that is registered on the ISP’s network.
Click Next
Click Next
8
Your Setup is Complete!
Click Restart
Test Internet Connection.
Once returned to the Home tab, close the web browser.
For additional settings or
information, refer to the
Advanced, Tools, or Status
tabs on the Web-management
interface; or to the Manual
located on the CD.
Relaunch your Web browser
(i.e., Internet Explorer or
Netscape Navigator), to link
to your favorite Web site to
test your Internet connection.
Click to Exit
9
APPENDIX
Insert the installation CD-ROM into the CD-ROM
drive. The following window appears
automatically. If not, please run “autorun.exe” on
the CD-ROM.
Installing the Print Server Software
Wait until the following Welcome dialog appears.
Select the destination folder.
Click Install Print Server Software
Click Next
Click Next
Select your Windows
operating system
10
After rebooting your computer, the software installation procedure is finished.
Installing the Print Server Software (continued)
Configuring on Windows 98SE/Me Platforms
After you finish the software installation procedure, your
computer will be capable of network printing provided by
the DI-704UP. On a Windows 95/98 platform, open the
Printers window in the My Computer menu.
Now, you can configure the print server of the DI-704UP:
Find out the corresponding icon of your printer, for
example, the Epson Sylus C60. Right click on that
icon, and then select Properties.
The following screen appears:
When the following window is displayed:
Click Finish
Click OK
Then, the setup program installs the programs
into the destination folder.
Andere Handbücher für Express EtherNetwork DI-704UP
1
Inhaltsverzeichnis
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link xStack DES-3528P Series Handbuch
D-Link
D-Link DSL-2730B Bedienungsanleitung
D-Link
D-Link DIR-842 Bedienungsanleitung
D-Link
D-Link DIR-2150 Bedienungsanleitung
D-Link
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Bedienungsanleitung
D-Link
D-Link DSL-G804V Betriebsanleitung
D-Link
D-Link AirPlus DWL-G730AP Bedienungsanleitung
D-Link
D-Link DIR-605L Bedienungsanleitung
D-Link
D-Link DSL-524T Bedienungsanleitung
D-Link
D-Link xStack DES-3200 Series Bedienungsanleitung
D-Link
D-Link Whole Home Router 1000 Bedienungsanleitung
D-Link
D-Link DSL-564T Bedienungsanleitung
D-Link
D-Link GO-RT-N300 Bedienungsanleitung
D-Link
D-Link DIR-300S Bedienungsanleitung
D-Link
D-Link DSL-G684T Bedienungsanleitung
D-Link
D-Link DES-1016D - Switch Bedienungsanleitung
D-Link
D-Link DWR-933 Bedienungsanleitung
D-Link
D-Link DFL-900 Bedienungsanleitung
D-Link
D-Link DSL-2520U Bedienungsanleitung
D-Link
D-Link DIR-611 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise