D-Link WRM921 Bedienungsanleitung

4G LTE ROUTER

DWR-M921

QUICK

INSTALLATION

GUIDE

DWR-M921

ENGLISH

CONTENTS OF

PACKAGING

CONTENTS

4G LTE ROUTER

DWR-M921

12V 1A POWER ADAPTER

ETHERNET CABLE (CAT5 UTP)

CONNECT THE ROUTER TO YOUR PC DURING SETUP

If any of these items are missing from your packaging

contact your reseller

DWR-M921 3

ENGLISH

PRODUCT

SETUP

HARDWARE SETUP

Ensure that your DWR-M921 Mobile Router is powered off before performing the steps below.

1. Flip the router around and open the lid at the bottom of the router.

2. Gently press down and slide the silver SIM card holder to the right (OPEN ) & open the flap.

3. Insert a standard USIM card into the SIM card holder with the gold contacts facing downward.

4. Close the flap and slide the SIM card holder back to the left ( LOCK) to lock it. Close the lid.

5. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-M921 Mobile Router,

and the other end into an Ethernet port on a computer to configure the unit.

Note:

crossover Ethernet cables can be used.

IP ADDRESS: http://192.168.0.1 USERNAME: admin

adminPASSWORD:

Note:

The DWR-M921 Mobile Router LAN Ports are “Auto-MDI/MDIX.” Therefore, patch or

The 4G connection can also be used as a backup WAN. Once a backup is configured.

ADVANCED SETUP (ACCESS VIA IP ADDRESS)

Open a browser window and enter the below IP address into the browser address field.

6. Connect the power adapter to the socket on the back panel of your DWR-M921 Mobile Router and

plug the other end of the power adapter into a wall outlet or power strip.

a. Turn ON the router. The Power LED will light up to indicate that power is being supplied to the router.

c. The initialization process takes about 45 seconds to a minute.

b. After a few moments, if a connection has been established, the following LEDs will turn

solid blue: Power, LAN 1-4 (depending on which port your Ethernet cable has been

connected to), Wi-Fi, LTE and WAN (if connection is used).

DWR-M921

ENGLISH

TROUBLESHOOTING

1. HOW DO I CONFIGURE MY DWR-M921 ROUTER OR CHECK MY WIRELESS NETWORK

NAME (SSID) AND WIRELESS PASSWORD (WPA KEY)?

- Connect your PC to the router using an Ethernet cable.

- Open a web browser and enter the router's IP address: http://192.168.0.1

- Log into the router using the default username admin, the default password is admin.

Note: If you have changed the password and cannot remember it, you will need to reset the

router to factory defaults.

2. HOW DO I RESET MY DWR-M921 ROUTER TO FACTORY DEFAULT SETTINGS?

- Ensure the router is powered on. If you cannot remember your router administrator password,

you may press and hold the reset button on the side of the router for about 10 seconds.

Note:

in question 1 and reconfigure your router through the GUI.

3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY

WIRELESS NETWORK NAME (SSID) OR WIRELESS PASSWORD (WPA KEY)?

- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the

correct Wireless Network Name (SSID) and Wireless Password (WPA key).

- Use the web based user interface (as described in question 1 above) to check or choose

your wireless settings.

- Make sure you write down these settings so that you can enter them into each wirelessly

4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?

- If connecting using a 4G mobile connection, make sure that you are within the network coverage

- If connecting using the WAN via ADSL/Fibre service, make sure the modem has been enabled/

SETUP AND CONFIGURATION PROBLEMS

- Once logged in, you can configure your router through the GUI.

Resetting the router to factory default will erase the current configuration. Log in as outlined

connected PC.

of your SIM card provider, and that the service has been correctly configured.

connected and is operational, and that the service is correctly configured.

ENGLISH

Tech Support for customers in

D-Link Middle East - Dubai, U.A.E.

Technical Support: +971-4-8809033

Egypt

Technical Support Call Center: +20 2258 66777

General Inquiries: [email protected]

Tech Support : [email protected]

Kingdom of Saudi Arabia

Technical Support:

+966 1121 70009

General Inquiries: [email protected]

Tech Support: [email protected]

South Africa

Technical Support:

+27-08600-35465, 012 741 2000

Pakistan

Technical Support: +92-21-34548310, 34305069

General Inquiries: [email protected]

Tech Support: [email protected]

Morocco

Phone office: +212 700 13 14 15

Email: [email protected]

Bahrain

Technical Support: +973 1 3332904

Kuwait

Email: [email protected]

TECHNICAL SUPPORT

Tech Support: [email protected]

General Inquiries: [email protected]

Tech Support: [email protected]

DWR-M921

ENGLISH

FCC WARNING: This equipment may generate or use radio frequency energy.

Changes or modifications to this equipment may cause harmful interference unless

the modifications are expressly approved in the instruction manual. The user could

lose the authority to operate this equipment if an unauthorized change or

modifications is made.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This equipment complies with RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 30 centimeters between the radiator and your body

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

•The rating information is located at the bottom of the unit.

DWR-M921

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-3900 Bedienungsanleitung

D-Link

D-Link DI-604UP Bedienungsanleitung

D-Link

D-Link DSL-2600U/NRU Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2690 Bedienungsanleitung

D-Link

D-Link DVA-G3670B Bedienungsanleitung

D-Link

D-Link DIR-822 Bedienungsanleitung

D-Link

D-Link DIR-600 Bedienungsanleitung

D-Link

D-Link DES-3010G Bedienungsanleitung

D-Link

D-Link EXO AX COVR-X1870 Bedienungsanleitung

D-Link

D-Link DIR-505L Bedienungsanleitung

D-Link

D-Link DSL-2500U Bedienungsanleitung

D-Link

D-Link DES-3018 Bedienungsanleitung

D-Link

D-Link DIR-X5460 Bedienungsanleitung

D-Link

D-Link DFL-300 - Security Appliance Bedienungsanleitung

D-Link

D-Link DIR-513A Bedienungsanleitung

D-Link

D-Link Cobra DSL-5300 Bedienungsanleitung

D-Link

D-Link DWM-312W Bedienungsanleitung

D-Link

D-Link DSL-224 Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link DSL-504 Bedienungsanleitung

D-Link

D-Link DWR-921 Bedienungsanleitung

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DIR-809 Bedienungsanleitung

D-Link

D-Link PowerLine DHP-P601AV Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise