D-Link DCS-4612EK Bedienungsanleitung
Contents
ENGLISH 1
DEUTSCH 13
FRANÇAIS 25
ESPAÑOL 37
ITALIANO 49
РУССКИЙ 61
УКРАЇНСЬКА 76
Quick Installation Guide 1
ENGLISH
Hardware Overview
DCS-4612EK/DCS-4614EK Front/Side
Figure 1: Front View Features
# Feature Description
1microSD
Slot
Slot for a microSD card.
2
Vertical
Adjustment
Screw
Loosen to adjust the vertical
angle of the camera
3 IR LED Provides illumination for low-
light environments
4
Horizontal
Adjustment
Screw
Loosen to adjust the horizontal
angle of the camera
5 Camera Lens Fixed camera lens
Table 1: Front View Descriptions
Before You Begin
This installation guide provides instructions
for installing and configuring your camera.
Additional documentation is also available on
the D-Link support website.
Refer to the manual for your model for
additional information on how to configure
the device using the associated Setup Wizard.
The manual and Setup Wizard may be found at
https://dlink.com/support/.
Package Contents
This package includes the following items:
• Vigilance Outdoor Dome Camera
• Cable Waterproofing Connector
• Mounting Kit
• Allen Key
• Alignment Sticker
• Documentation
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: Using a power supply with a different
voltage than the one recommended for the
device will cause damage and void the warranty
for this product.
System Requirements
• Computer running Microsoft Windows®
• Internet Explorer 11
2
3
4
5
1
2Quick Installation Guide
ENGLISH
DCS-4618EK Front/Side
Figure 2: Front View Features
# Feature Description
1
Vertical
Adjustment
Screw
Loosen to adjust the vertical
angle of the camera.
2 IR LED Provides illumination for low-
light environments
3 Camera Lens Motorized camera lens
4microSD
Slot
Slot for microSD card.
Table 2: Front View Descriptions
DCS-4612EK/DCS-4614EK/DCS-
4618EK Cable Interfaces
Figure 3: Cable Interfaces
# Feature Description
1Ethernet
Jack
RJ-45 connector for Ethernet. Can
also be used to power the camera
using Power over Ethernet (PoE)
2Power
Connector
Connects to an optional 12 V / 1.5 A
power adapter (not included)
3Reset
Button
Press and hold for more than five
seconds, then release to perform
a factory reset
Table 3: Cable Interface Descriptions
Management Options
To configure and manage your camera, it
is recommended that you download the
associated Setup Wizard and the D-ViewCam
software suite, both of which are available from
the D-Link website.
Installing the Setup Wizard
1. Open a web browser, navigate to
dlink.com/support/, and select your
region.
2. On the next screen, enter the model
number of your camera in the search bar
and click Search. Click the picture of your
camera. On the product page, click the
Download button next to SetupWizard.
3. Once the executable file has finished
downloading, click it and follow the
instructions to install the Setup Wizard.
1
2
3
3
2
14
Quick Installation Guide 3
ENGLISH
Conguring the Camera
1. Ensure that your camera is plugged in
(either using a 12 V 1.5 A power adapter
or a PoE-enabled device) and connected
to your computer with an Ethernet cable.
2. Open the Setup Wizard. It will display
the MAC address and IP address of your
camera. If you have a DHCP server on your
network, this will be a dynamic IP address.
If your network does not use a DHCP
server, the network camera’s default static
IP 192.168.0.20 will be displayed. Select
your camera, then click the Link button to
continue.
Figure 4: Launching the Setup Wizard
3. If this is your first time logging in, you will be
prompted to create a password, which must
be between 8 and 30 characters and must
contain both letters and numbers. Press OK.
Figure 5: Creating a Password
4. To view the camera display, on the main
screen of the Setup Wizard, click the
Search button, then select your camera
and click the Link button to open the
camera’s web UI. Alternatively, open a
web browser and type the camera’s IP
address (displayed in step 2) into the URL
bar and press Enter. Enter the password
you created, and click Login to continue.
Figure 6: Authenticating
Installing D-ViewCam
1. Open a web browser, navigate to
dlink.com/support/, and select your
region.
2. On the next screen, click the D-ViewCam
link and click the most recent version to
download the D-ViewCam setup wizard
(packaged as a zip file).
3. Once the file has finished downloading,
unzip it, and click the executable file
SetupTool.exe. Follow the instructions
to install the D-ViewCam software suite.
For advanced viewing options, refer to the
D-ViewCam User Manual.
4Quick Installation Guide
ENGLISH
Mounting the Camera
Note:It is highly recommended that you configure
and test your camera before mounting it.
The DCS-4612EK, DCS-4614EK and DCS-4618EK
can be installed on the ceiling or wall. The
process is identical for both cameras.
Mounting the Camera
1. Use the included T10 or T15 screwdriver
to unscrew the three screws on the dome
cover and remove it.
Figure 7: Removing the Cover
2. Press the sides of the plastic lining and
gently lift it to remove the lining from
the camera.
Figure 8: Removing the Lining
3. Place the installation sticker on the ceiling
or wall. Using a 4 mm drill bit, drill three
holes 30 mm deep into the wall or ceiling.
Drive the plastic wall anchors into the holes.
Figure 9: Attaching the Camera
4. Insert three mounting screws into the
holes in the base of the device. Place the
device against the mounting sticker and
screw it in to attach it to the wall or ceiling.
Three screws with rubber gaskets are
provided with DCS-4618EK. To ensure
waterproofness you MUST mount the
DCS-4618EK with all three of the provided
screws.
Quick Installation Guide 5
ENGLISH
5. Reattach the lining to the camera body
by sliding it on until it clicks. Replace
the dome cover and refasten the screws
securing it in place.
Figure 10: Replace the dome cover
Adjusting the Lens
The angle, zoom and focus of the lens can
adjusted using the web UI. For information on
how to do this, refer to the User Manual.
15° - 90°
0 - 350° 0 - 335°
10° - 90°
0 - 350°
0 - 335°
Figure 11: Positioning the Lens
Waterproong Your Installation
To waterproof your camera, follow the instructions
below. A round Ethernet cable, a crimping tool,
and RJ-45 plugs are required for this procedure.
1. Place the washer around the base of the
Ethernet connector as shown.
Figure 12: Attaching the Washer Ring
2. Thread the bare Ethernet cable through
the waterproof connector as shown.
Figure 13: Threading the Cable
3. Attach an RJ-45 plug to the end of the
cable using a crimping tool.
Figure 14: Attaching the RJ-45 Connector
6Quick Installation Guide
ENGLISH
4. Connect the RJ-45 plug into the Ethernet
connector, then screw the waterproof
connector to the Ethernet connector by
turning it clockwise about one half-turn.
Figure 15: Attaching the Waterproof Connector
5. Screw the back part of the waterproof
connector clockwise until there is a tight
seal around the Ethernet cable.
Figure 16: Tightening the Connector
6. The power connector and reset
button cables are not waterproof. It is
recommended to use waterproof tape
to protect them. Wind the tape around
each cable in an overlapping manner to
cover them.
Figure 17: Wrapping the Power
Connector and Reset Button
Quick Installation Guide 7
ENGLISH
Using the DCS-37-5 Mount (optional)
1. 3.
4.2.
8Quick Installation Guide
ENGLISH
Using the DCS-37-6 Mount (optional)
1. 3.
4.2.
Andere Handbücher für DCS-4612EK
1
Dieses Handbuch passt für folgende Modelle
2
Andere D-Link Sicherheitskamera Handbücher
D-Link
D-Link DCS-6616 Bedienungsanleitung
D-Link
D-Link DCS-6314 Bedienungsanleitung
D-Link
D-Link DCS-6112 Bedienungsanleitung
D-Link
D-Link DCS-6616 Bedienungsanleitung
D-Link
D-Link DCS-932L Bedienungsanleitung
D-Link
D-Link DCS-5615 Bedienungsanleitung
D-Link
D-Link DCS-6112 Bedienungsanleitung
D-Link
D-Link DCS-2530L Bedienungsanleitung
D-Link
D-Link SECURICAM DCS-6511 Bedienungsanleitung
D-Link
D-Link SECURICAM DCS-6110 Bedienungsanleitung
D-Link
D-Link DCS-3411 Bedienungsanleitung
D-Link
D-Link DCS-5610 Bedienungsanleitung
D-Link
D-Link DCS-F4605EK Bedienungsanleitung
D-Link
D-Link DCS-3410 Bedienungsanleitung
D-Link
D-Link DCS-2310L Bedienungsanleitung
D-Link
D-Link DCS-5020L Bedienungsanleitung
D-Link
D-Link DCS?6010L Bedienungsanleitung
D-Link
D-Link 8DLDCS936L Bedienungsanleitung
D-Link
D-Link DCS-5010L Bedienungsanleitung
D-Link
D-Link DCS-7010L Bedienungsanleitung
