D-Link DCS 6210 Bedienungsanleitung

This document will guide you through the

basic installation process for your new D-Link

Network Camera.

DCS-6210

Documentation also available on CD

and via the D-Link Website

Quick Installation Guide

Full HD Mini Fixed Dome Network Camera

Quick Installation Guide

Installationsanleitung

Guide d’installation

Guía de instalación

Guida di Installazione

D-Link DCS-6210 Quick Install Guide 1

ENGLISH

DCS-6210 Quick Install Guide

This installation guide provides basic instructions for installing the DCS-6210 Network

Camera on your network. For additional information about how to use the camera,

please see the User’s Manual which is available on the CD included in this package or

from the D-Link support website.

Installation Steps

1. Verify the package contents against the list below.

2. Hardware Overview

3. SD Card Installation

4. Hardware Installation

5. Conguration with Wizard

6. Adjusting the lens 3-axis angel

1. Package Contents

DCS-6210 Network camera

Manual and Software on CD-ROM

Quick Installation Guide

Power Adaptor

CAT-5 Ethernet cable

Screwdriver and Screws for installation

Alignment Sticker

Rubbers

If any of the above items are missing, please contact your reseller.

Safety Notice:

Installation and servicing should be done by certied technicians so as to conform to all

local codes and prevent voiding your warranty.

D-Link DCS-6210 Quick Install Guide

ENGLISH

2. Hardware Overview

SD/SDHC card slot

SD/SDHC card for storing

recorded images and video

Power Connector

Connects to 12 V DC power

Ethernet Jack

RJ-45 connector for Ethernet

whichcan also be used to

power the camera using

Power over Ethernet (PoE)

Install the SD Card

Push the SD card into the camera with the

gold contacts oriented towards the base of

the camera. To eject the SD card, push the

SD card into the slot.

3. SD Card Installation

Disassemble the Camera

Open the camera enclosure by loosen the

3 screws. Lift the dome off the base of the

camera.

LED

Power and network

indicator

Reset

Press and hold this

button for 10seconds to

reset the camera

D-Link DCS-6210 Quick Install Guide 3

ENGLISH

4. Hardware Installation

Mounting Installation

Please see the User Manual for detailed instructions regarding installation and mounting

of the camera.

Figure 4.1 Figure 4.2

Figure 4.3 Figure 4.4

Figure 4.5

D-Link DCS-6210 Quick Install Guide

ENGLISH

Connection with a PoE Hub

If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable,

which will provide transmission of both power and data over a single cable.

General Connection Using 12 V DC Power Adapter

1. Connect the network camera to a hub via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power outlet.

D-Link DCS-6210 Quick Install Guide 5

ENGLISH

5. Conguration with Wizard

Click Setup Wizard to begin the installation.

Insert the DCS-6210 CD into your computer's CD-ROM drive to begin the installation. If

the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start

automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive

letter of your CD-ROM drive.

After clicking Setup Wizard, the following window will open.

Click Next to continue.

Click Yes to accept the License Agreement.

Click Finish to complete the installation.

To start the installation process, click Next.

Note: The installation may take several minutes to

nish.

D-Link DCS-6210 Quick Install Guide

ENGLISH

Click on the D-Link Setup Wizard SE icon that was

created in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Take a moment to conrm your settings and click Restart.

Select DHCP if your camera obtains an IP address

automatically when it boots up. Select static IP if the

camera will use the same IP address each time it is

started.

Click Next, to proceed to the next page.

Enter the Admin ID and password. When logging in for

the rst time, the default Admin ID is admin with the

password left blank.

Click Next, to proceed to the next page.

The Setup Wizard will appear and display the MAC

address and IP address of your camera(s). If you have

a DHCP server on your network, a valid IP Address

will be displayed. If your network does not use a

DHCP server, the network camera's default static IP

192.168.0.20 will be displayed.

Click the Wizard button to continue.

D-Link DCS-6210 Quick Install Guide 7

ENGLISH

Click on the D-Link Setup Wizard SE icon that was

created in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Viewing Camera via Web Browser

This section shows your camera’s live video. You

can select your video prole and view or operate

the camera. For additional information about web

conguration, please refer to the user manual included

on the CD-ROM or the D-Link website.

Enter admin as the default username and leave the

password blank. Click OK to continue.

Select the camera and click the button labeled "Link"

to access the web conguration.

The Setup Wizard will automatically open your web

browser to the IP address of the camera.

D-Link DCS-6210 Quick Install Guide

ENGLISH

Adjust the Viewing Angle of the 3-axis

Mechanism

Turn the lens module left and right until the

desired position is achieved.

Turn the lens up and down until the desired

position is achieved.

Turn the lens to adjust the IP camera’s image

until the desired orientation is achieved.

6. Adjusting the lens 3-axis angel

TECHNICAL SUPPORT

United Kingdom (Mon-Fri) website: http://www.dlink.co.uk FTP: ftp://ftp.dlink.co.uk

Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)

Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)

(BT 10ppm, other carriers may vary.)

Ireland (Mon-Fri)

All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)

Phone rates: €0.05ppm peak, €0.045ppm off peak times

Andere Handbücher für DCS 6210

Inhaltsverzeichnis

Sprachen:

Andere D-Link Sicherheitskamera Handbücher

D-Link

D-Link DCS-6116 Bedienungsanleitung

D-Link

D-Link DCS-7410 Bedienungsanleitung

D-Link

D-Link DCS-3511 Bedienungsanleitung

D-Link

D-Link SECURICAM Network DCS-2120 Bedienungsanleitung

D-Link

D-Link DCS-3716 Bedienungsanleitung

D-Link

D-Link DCS-6100LH Bedienungsanleitung

D-Link

D-Link DCS-3110 - SECURICAM Fixed Network Camera Bedienungsanleitung

D-Link

D-Link DCS-1201 Bedienungsanleitung

D-Link

D-Link DCS-4602EV Bedienungsanleitung

D-Link

D-Link DCS-930L Handbuch

D-Link

D-Link DCS-6517 Bedienungsanleitung

D-Link

D-Link DCS-6315 Bedienungsanleitung

D-Link

D-Link SECURICAM DCS-6511 Bedienungsanleitung

D-Link

D-Link DCS-3511 Bedienungsanleitung

D-Link

D-Link Securicam DCS-3415 Bedienungsanleitung

D-Link

D-Link DCS-3410 Bedienungsanleitung

D-Link

D-Link DCS-6111 Bedienungsanleitung

D-Link

D-Link DCS-7513 Bedienungsanleitung

D-Link

D-Link DCS-6212L Bedienungsanleitung

D-Link

D-Link DCS-4602EV Bedienungsanleitung

D-Link

D-Link DCS-3410 Bedienungsanleitung

D-Link

D-Link DCS-7410 Bedienungsanleitung

D-Link

D-Link DCS-931L Cloud Camera 1050 Bedienungsanleitung

D-Link

D-Link DCS-930L Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung