D-Link SECURICAM DCS-7110 Bedienungsanleitung
This document will guide you through the basic installation
process for your new D-Link Network Camera.
DCS-7110
Documentation also available on
CD and via the D-Link Website
Quick Installation Guide
HD IR Outdoor Network Camera
Quick Installation Guide
Installationsanleitung
Guide d’installation
Guía de instalación
Guida di Installazione
D-Link DCS-7110 Quick Installation Guide
2
ENGLISH
DCS-7110 Quick Installation Guide
This installation guide provides basic instructions for installing the DCS-7110 Network
Camera on your network. For additional information about how to use the camera,
please see the User’s Manual which is available on the CD include in this package or
from the D-Link support website.
Installation Steps
1. Verify the package contents against the list below.
2. Hardware Overview
3. Hardware Installation
4. Conguration with Wizard
1. Package Contents
DCS-7110 HD IR Outdoor Network Camera
Mounting Bracket
User Manual and Software on CD-ROM
CAT5 Ethernet Cable
Power Adapter
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
D-Link DCS-7110 Quick Installation Guide 3
ENGLISH
2. Hardware Overview
Infrared LEDs
IR LEDs Illuminate the
camera's eld of view
DI/DO Connectors
DI/DO connectors provide a physical interface
to send and receive digital signals to and from a
variety of external devices
Reset Button
Press and hold this button for 10 seconds to
reset the camera to factory default settings
DC Power
Connects to the 12V DC power adapter to
power the camera
Ethernet (PoE)
RJ-45 connector is for Ethernet and can also
be used to power the camera using PoE
IR-Cut Removable
(ICR) Sensor
IR-Cut Removable
sensor judges lighting
conditions and
switches from day
mode to night mode
accordingly
Sunshield
Adjustable sunshield
protects the camera
sensor from direct
sunlight
24V Power Connector
Connects to 24V AC power
RS485 connector
RS485 Connectors for external devices
D-Link DCS-7110 Quick Installation Guide
4
ENGLISH
3. Hardware Installation
Ceiling Mount
1. Locate an area on the ceiling which is capable of
supporting the weight of the camera.
2. Mark and drill three pilot holes aligned to the screw
holes at the base of the mounting bracket.
3. Insert the plastic anchors into the pilot holes, and
align the holes at the base of the camera bracket
with the plastic anchors.
4. Once aligned, insert the provided screws through the
holes at the base of the camera bracket.
5. Use a screwdriver to tighten and secure the bracket
into place.
6. Attach the camera enclosure to the mounting
bracket. Align the camera to the correct eld of view
and tighten the thumbscrew to lock it into place.
7. The camera cables can be installed through a
separate large hole drilled in the ceiling, or using an
external cable conduit.
Wall Mount
1. Locate an area on the wall which is capable of
supporting the weight of the camera.
2. Mark and drill three pilot holes aligned to the screw
holes at the base of the mounting bracket.
3. Insert the plastic anchors into the pilot holes, and
align the holes at the base of the camera bracket
with the plastic anchors.
4. Once aligned, insert the provided screws through the
holes at the base of the camera bracket.
5. Use a screwdriver to tighten and secure the bracket
into place.
6. Attach the camera enclosure to the mounting
bracket. Align the camera to the correct eld of view
and tighten the thumbscrew to lock it into place.
7. The camera cables can be installed through a
separate large hole drilled in the wall, or using an
external cable conduit.
D-Link DCS-7110 Quick Installation Guide
5
ENGLISH
Cable Connections
Basic Connection (without PoE)
1. Connect the camera to your switch or router via Ethernet cable.
2. Connect the power cable from the camera to the supplied power adapter.
3. Connect the supplied power adapter to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
D-Link DCS-7110 Quick Installation Guide
6
ENGLISH
4. Conguration with Wizard
Click Setup Wizard to begin the installation.
Insert the DCS-7110 CD into your computer's CD-ROM drive to begin the installation. If
the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive
letter of your CD-ROM drive.
After clicking Setuop Wizard, the following window will
open.
Click Next to continue.
Click Yes to accept the License Agreement.
Click Finish to complete the installation.
To start the installation process, click Next.
Note: The installation may take several minutes to
nish.
D-Link DCS-7110 Quick Installation Guide
7
ENGLISH
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Take a moment to conrm your settings and click Restart.
Select DHCP if your camera obtains an IP address
automatically when it boots up. Select static IP if the
camera will use the same IP address each time it is
started.
Click Next, to proceed to the next page.
Enter the Admin ID and password. When logging in for
the rst time, the default Admin ID is admin with the
password left blank.
Click Next, to proceed to the next page.
The Setup Wizard will appear and display the MAC
address and IP address of your camera(s). If you have
a DHCP server on your network, a valid IP Address
will be displayed. If your network does not use a
DHCP server, the network camera's default static IP
192.168.0.20 will be displayed.
Click the Wizard button to continue.
D-Link DCS-7110 Quick Installation Guide
8
United Kingdom (Mon-Fri) website: http://www.dlink.co.uk FTP: ftp://ftp.dlink.co.uk
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri)
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times
ENGLISH
Technical Support
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Viewing Camera via Web Browser
This section shows your camera’s live video. You
can select your video prole and view or operate
the camera. For additional information about web
conguration, please refer to the user manual included
on the CD-ROM or the D-Link website.
Enter admin as the default username and leave the
password blank. Click OK to continue.
Select the camera and click the button labeled "Link"
to access the web conguration.
The Setup Wizard will automatically open your web
browser to the IP address of the camera.
D-Link DCS-7110 Quick Install Guide 9
DEUTSCH
DCS-7110 Installationsanleitung
Diese Installationsanleitung bietet Ihnen grundlegende Anleitungen zur Installation
der DCS-7110 Netzwerkkamera in Ihrem Netzwerk. Zusätzliche Informationen zur
Verwendung der Kamera nden Sie im Benutzerhandbuch, das Ihnen auf der CD, die
diesem Paket beiliegt, oder über die D-Link Support-Website zur Verfügung steht.
Installationsschritte
1. Prüfen Sie den Packungsinhalt, ob er mit den auf der Liste unten aufgeführten
Artikeln übereinstimmt.
2. Hardware-Überblick
3. Hardware-Installation
4. Konguration mithilfe des Assistenten
1. Packungsinhalt
DCS-7110 HD IR Outdoor Network Camera
Kamerahalterung
CD-ROM mit Software und Benutzerhandbuch
Kat.5 Ethernetkabel
Stromadapter/Netzteil
Installationsanleitung
Sollte einer der oben aufgeführten Artikel fehlen, wenden Sie sich bitte an Ihren
Fachhändler.
D-Link DCS-7110 Quick Install Guide
10
DEUTSCH
2. Hardware-Überblick
Infrarot-LEDs
IR LEDs dienen als
Beleuchtungsquelle für das
Sichtfeld der Kamera
Steckverbinder für digitalen Ein- und Ausgang
Diese Steckverbinder bieten eine physische Schnittstelle
zum Senden digitaler Signale an eine Reihe externer Geräte
bzw. zum Empfangen digitaler Signale von solchen Geräten
Rücksetztaste (Reset)
Drücken und halten Sie diese Taste 10 Sekunde lang
gedrückt, um die werkseitigen Standardeinstellungen
wiederherzustellen.
Gleichstromkabel
Ist der Anschluss an das Netzteil/Stromadapter (12V
Gleichstrom) für die Stromzufuhr der Kamera
Ethernet (PoE)
RJ-45-Anschluss für Ethernet, der auch für die
Stromzufuhr (PoE) verwendet werden kann
Vorderseite
IR-Cut Removable (ICR) Sensor
Der IR-Cut Removable Sensor
(austauschbarer Sensor) prüft die
Beleuchtungsbedingungen und
schaltet entsprechend vom Tag-
auf den Nachtmodus um.
Sonnenblende
Verstellbare
Sonnenblende
schützt
Kamerasensor
vor direktem
Sonnenlicht
24V Stromanschluss
Für den Anschluss an 24V Wechselstrom
RS485-Anschluss
RS485-Anschlüsse für externe Geräte
Andere Handbücher für SECURICAM DCS-7110
11
Inhaltsverzeichnis
Sprachen:
Andere D-Link Sicherheitskamera Handbücher
D-Link
D-Link DCS-930L Bedienungsanleitung
D-Link
D-Link DCS-2670L Bedienungsanleitung
D-Link
D-Link DCS-936L Bedienungsanleitung
D-Link
D-Link DCS-6100LHV2 Bedienungsanleitung
D-Link
D-Link DCS-3411 Bedienungsanleitung
D-Link
D-Link DCS-2530L Bedienungsanleitung
D-Link
D-Link DCS-5610 Bedienungsanleitung
D-Link
D-Link DCS-5020L Bedienungsanleitung
D-Link
D-Link DCS-4612EK Bedienungsanleitung
D-Link
D-Link DCS-936L Bedienungsanleitung
D-Link
D-Link DCS-2210 Bedienungsanleitung
D-Link
D-Link DCS-8620LH Bedienungsanleitung
D-Link
D-Link DCS-3110 - SECURICAM Fixed Network Camera Bedienungsanleitung
D-Link
D-Link DCS-1100 Bedienungsanleitung
D-Link
D-Link DCS-6616 Bedienungsanleitung
D-Link
D-Link DCS-5000L Bedienungsanleitung
D-Link
D-Link SECURICAM DCS-7110 Bedienungsanleitung
D-Link
D-Link DCS-7413 Bedienungsanleitung
D-Link
D-Link DCS-936L Bedienungsanleitung
D-Link
D-Link DCS-6915 Bedienungsanleitung
