D-Link DES-1226R Bedienungsanleitung

ENGLISH

DES-1218

R/1226R

Fast Ethernet Switch

With 2 Gigabit Port

Installation Guide

First Edition (July, 2001)

6ES1200RML01

Printed In Taiwan

RECYCLABLE

Introduction

This Quick Installation Guide gives illustrations

for configuring DES-12xx series Fast Ethernet

Switches. The model you have purchased may

appear slightly different from those shown in the

illustrations. Examples in this manual are based

on DES-1218R/DES-1226R switches. However,

the information provided also applies to new

model in the future. For more detailed informa-

tion about the switch, its components, making

network connections and technical specifica-

tions, please refer to the User’s Guide included

with your switch.

Unpacking

Please make sure the following items are present

and undamaged.

Rack Installation

Attaching the mounting brackets on the switch’s

front panel (one on each side) and secures them

with the screws provided.

Then, use the screws provided with the equip-

ment rack to mount the Switch in the rack.

ENGLISH

Plugging in the AC Power Cord

Please connect the AC power cord into an electri-

cal outlet (preferably one that is grounded and

surge protected) and into the rear of the switch.

Once the switch is powered on, you will be able to

immediately see whether the network connection

are valid or not. A valid connection will cause the

Link/Rx LED on the front panel of the switch to

light up for the corresponding port being con-

nected.

Connecting End Stations

Computers, servers and routers can be connected

to the switch by using normal straight-through

twisted-pair network cables. 10Mbps Ethernet

connections should use Category 3 or better UTP

cabling, while 100Mbps Fast Ethernet connec-

tions should use Category 5 or better UTP or STP

cabling. On the other hand, Gigabit Ethernet

connections will use fiber optic cables. For more

information about cable types, please refer to the

User’s Guide.

Ethernet uses a star topology, so please be atten-

tion that cables should never be connected to

form a loop. Data sent from one computer should

have one, and only one path to the destination

computer.

Uplinking

The switch can be Uplinked to other network de-

vices (hubs, hub stacks, bridges, switches, etc.).

When making uplink connections, make sure

there is only a single connection, and always

connect an Uplink port on one switch to a non-

Uplink port on the other device, as shown in the

diagram below.

The following diagram shows one type of network

connections that can be made to the switch. For

more connection implementations please refer to

the User’s Guide or consult your vendor.

Additional Information

If you are encountering problems setting up

your network, please refer to the User’s Guide

that came with the switch. It contains many

more rules, charts, explanations and examples

to help you get your network up and running.

Additional help is available online at

http://www.dlink.com for the United States and

http://www.dlink.co.uk for Great Britain. URLs

for D-Link Websites in other countries are con-

tained in the list at the back of the User’s Guide.

Andere Handbücher für DES-1226R

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link DMS-1250 Series Handbuch

D-Link

D-Link xStack DGS-3620 Series Bedienungsanleitung

D-Link

D-Link DES-1008D Bedienungsanleitung

D-Link

D-Link DES-1526 Bedienungsanleitung

D-Link

D-Link DGS-1016D - Switch Bedienungsanleitung

D-Link

D-Link DGS-3630 SERIES Bedienungsanleitung

D-Link

D-Link DGS-1210/ME series Bedienungsanleitung

D-Link

D-Link DGS-3000-28X Bedienungsanleitung

D-Link

D-Link DGS-1005A Bedienungsanleitung

D-Link

D-Link DES-3226 Bedienungsanleitung

D-Link

D-Link DWS-1008 Bedienungsanleitung

D-Link

D-Link DES-3250TG Bedienungsanleitung

D-Link

D-Link xStack DGS-3600 Series Bedienungsanleitung

D-Link

D-Link DUB-H7 Bedienungsanleitung

D-Link

D-Link D DSB-H4 DSB-H4 Bedienungsanleitung

D-Link

D-Link DIS-100G-8W Bedienungsanleitung

D-Link

D-Link DGS-3000-28XS Bedienungsanleitung

D-Link

D-Link DSS-16+ Bedienungsanleitung

D-Link

D-Link DGS-F1018P-E Bedienungsanleitung

D-Link

D-Link DES-3528 - xStack Switch - Stackable Bedienungsanleitung

D-Link

D-Link DES-1100-10MP Bedienungsanleitung

D-Link

D-Link DKVM-2/4 Bedienungsanleitung

D-Link

D-Link DES-1005D Bedienungsanleitung

D-Link

D-Link DGS-1210 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung