D-Link DGS-1210 Series Bedienungsanleitung

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

1 Product Introduction

Switch Description

Front Panel Description

LED Indicators

Rear Panel Description

Side Panel Description

Connecting the DPS-200A/500A/500DC to the RPS Port (for DGS-1210-

10/12TS/20/28X/28XS/52/ME only)

Installing the RPS into the Rack-mount Chassis (for DGS-1210-10/12TS/20/28X/28XS/52/ME only)

Switch Description

The DGS-1210/ME Metro Ethernet Switch is equipped with Copper ports (10/100/1000Mbps) and SFP

ports (1000Mbps) that can be used to attach various networking devices to the network like Computers,

Notebooks, Print Servers, Network Attached Storage devices, IP Cameras, VoIP PBX devices, and other

Switches. The Small Form Factor Portable (SFP) ports can be used together with fiber-optical transceivers in

order to connect various other networking devices, using a fiber-optic connection, to the network at Gigabit

Ethernet speeds over great distances.

This DGS-1210/ME Metro Ethernet Switch provides unsurpassed performance, fault tolerance, scalability,

robust security, standard-based interoperability and impressive technology to future-proof departmental and

enterprise network deployments.

It allows IGMP Snooping and Authentication, QoS, Bandwidth Control, ACL and many security functions. It

can be managed by Web UI, or commands via Telnet.

The DGS-1210/ME Metro Ethernet Switches have different port configuration (10/100/1000Base-T or SFP

ports) that may be used in to uplink various network devices to the Switch, including PCs, hubs and other

switches to provide a gigabit Ethernet uplink in full-duplex mode. The SFP (Small Form Factor Portable)

ports are used with fiber-optical transceiver cabling in order to uplink various other networking devices for a

gigabit link that may span great distances.

Front Panel Description

The front panel of the DGS-1210-10/ME switch consists out of the following:

•8 10/100/1000Mbps Copper Ports

•2 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, RPS, Link/Act for port 1 ~ 10

Figure 1.1 – DGS-1210-10/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

The front panel of the DGS-1210-10P/ME switch consists out of the following:

•8 10/100/1000Mbps Copper Ports

•2 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, PoE Max, Console, Link/Act for port 1 ~ 10

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes.

Figure 1.2 – DGS-1210-10P/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

NOTE: The power budget is 78 Watts for DGS-1210-10P/ME.

The front panel of the DGS-1210-12TS/ME switch consists out of the following:

•10 1000Mbps SFP port

•2 10/100/1000Mbps Copper Ports

•One RJ-45 Console Port

•LEDs for Power, Console, RPS, Link/Act for port 1 ~ 12

Figure 1.3 – DGS-1210-12TS/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-20/ME switch consists out of the following:

•16 10/100/1000Mbps Copper Ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, RPS, Link/Act for port 1 ~ 20

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

Figure 1.4 – DGS-1210-20/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-28/ME switch consists out of the following:

•24 10/100/1000Mbps Copper Ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, RPS, Console, Link/Act for port 1 ~ 28

Figure 1.5 – DGS-1210-28/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION: Les ports Mini

GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-28P/ME switch consists out of the following:

•24 10/100/1000Mbps Copper Ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, Pwr Max, Link/Act for port 1 ~ 28

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes

Figure 1.6 – DGS-1210-28P/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

NOTE: The power budget is 193 Watts for DGS-1210-28P/ME.

The front panel of the DGS-1210-28MP/ME switch consists out of the following:

•24 10/100/1000Mbps Copper Ports

•4 1000Mbps SFP port

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, Pwr Max, Link/Act for port 1 ~ 28

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes

Figure 1.7 – DGS-1210-28MP/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

NOTE: The power budget is 370 Watts for DGS-1210-28MP/ME.

The front panel of the DGS-1210-28X/ME switch consists out of the following:

•24 10/100/1000Mbps Copper Ports

•4 1000Mbps/10G SFP+ port

•One RJ-45 Console Port

•LEDs for RPS, Power, Console, Fan Error, Link/Act for port 1 ~ 28

Figure 1.8 – DGS-1210-28X/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-28XS/ME switch consists out of the following:

•24 100/1000Mbps SFP port

•4 1000Mbps/10G SFP+ ports

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, RPS, Link/Act for port 1 ~ 28

Figure 1.9 – DGS-1210-28XS/ME Front Panel

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION: Les

ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-52/ME switch consists out of the following:

•48 10/100/1000Mbps Copper Ports

•4 1000Mbps SFP ports

•LEDs for Power, Console, Fan Error , RPS, Link/Act for port 1 ~ 52

Figure 1.10 – DGS-1210-52/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

The front panel of the DGS-1210-52P/ME switch consists out of the following:

•48 10/100/1000Mbps Copper Ports

•24 10/100/1000Mbps PoE ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, PoE Max, Link/Act for port 1 ~ 52

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes

Figure 1.11 – DGS-1210-52P/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

NOTE: The power budget is 193 Watts for DGS-1210-52P/ME.

The front panel of the DGS-1210-52MP/ME switch consists out of the following:

•48 10/100/1000Mbps Copper and PoE Ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, PoE Max, Link/Act for port 1 ~ 52

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes

Figure 1.12 – DGS-1210-52MP/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION: Les ports Mini GBIC doivent ut

iliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

NOTE: The power budget is 370 Watts for DGS-1210-52MP/ME.

The front panel of the DGS-1210-52MPP/ME switch consists out of the following:

•48 10/100/1000Mbps Copper and PoE Ports

•4 1000Mbps SFP ports

•One RJ-45 Console Port

•LEDs for Power, Console, Fan Error, PoE Max, Link/Act for port 1 ~ 52

•Mode:By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes

Figure 1.13 – DGS-1210-52MPP/ME Front Panel

CAUTION: The MiniGBIC ports should use UL listed

Optical Transceiver product, Rated Laser Class I. 3.3Vdc.

PRÉCAUTION:

Les ports Mini GBIC doivent utiliser la

liste UL. Produit émetteur-récepteur optique, classe laser

I. 3.3Vdc.

NOTE: The power budget is 740 Watts for DGS-1210-52MPP/ME.

LED Indicators

The Switch supports LED indicators for Power, Console, Fan, and Link/Act for each port. The following

shows the LED indicators for the DGS-1210/ME Metro Ethernet Switch along with an explanation of each

indicator.

Figure 1.14 –LED Indicators on DGS-1210/ME SERIES

Location LED Indicative Color Status Description

Per Device Power Green

Solid

Light

Power on.

Light

off

Power off.

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

Console Green

Solid

Light

Console on.

Blinking

POST is in progress.

Light

off

Console off.

Fan Error

(for DGS-1210-28P/ME,

28MP/ME, 28X/ME, 28XS/ME,

52/ME, 52P/ME, 52MP/ME,

52MPP/ME)

Red Solid

light

The fan has runtime failure and

is brought offline.

Pwr/PoE Max.

(for DGS-1210-10P/ME,

28P/ME, 28MP/ME 52P/ME,

52MP/ME, 52MPP/ME)

Red

Solid

light

The Pwr/PoE Max LED lights up

when the total PoE output of

Switch reached or exceeded 71

Watts for DGS-1210-10P/ME,

186 Watts for DGS-1210-

28P/52P/ME, 363 Watts for

DGS-1210-28MP/52MP/ME,

and 733 Watts for DGS-1210-

52MPP/ME.

In the meantime, no

additional PoE device can be

supported.

Light

off

When the system power usage

does not reach the guard band

range.

RPS

(DGS-1210-

10/12TS/20/28/28X/28XS/52/ME)

Green

Solid

Light

RPS power on.

Light

off

RPS power off.

LED Per

10/100/1000

Mbps

Copper Port

Link/Act Green/Amber

Solid

Green

When there is a secure

1000Mbps Ethernet connection

(or link) at any of the ports.

Blinking

Green

When there is reception or

transmission (i.e. Activity—Act)

of data occurring at a

1000Mbps

Ethernet connected port.

Solid

Amber

When there is a secure

10/100Mbps Ethernet

connection (or link) at any of the

ports.

Blinking

Amber

When there is reception or

transmission (i.e. Activity—Act)

of data occurring at a

10/100Mbps Ethernet

connected

port.

Light

off

No link.

PoE Mode

Green

Solid

Light

Power feeding

Amber

Solid

Light

Error Condition

Off

Solid

Off

No Power feeding

LED Per SFP

Port Link/Act Green

Solid

Green

When there is a secure

1000Mbps Ethernet connection

(or link) at any of the ports.

Blinking

Green

When there is reception or

transmission (i.e. Activity—Act)

of data occurring at a 1000

Mbps

Ethernet connected port.

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

Amber

Solid

Light

When there is a secure

100Mbps connection at the port.

(For DGS-1210-28XS/ME only)

Blinking

Amber

When there is reception or

transmission occurring at the

port. (For DGS-1210-28XS/ME

only)

Off

Solid

off

No link.

LED Per 10G

SFP+ Port

(for DGS-1210-

28X/ME,

28XS/ME)

Link/Act

Green

Solid

Light

When there is a secure 10Gbps

connection at the port.

Blinking

Green

When there is reception or

transmission occurring at the

port.

Amber

Solid

Light

When there is a secure

1000Mbps connection at the

port.

Blinking

Amber

When there is reception or

transmission occurring at the

port.

Off

Solid

off

No link.

Rear Panel Description

The rear panel of the Switch contains an AC power connector. The AC power connector is a standard three-

pronged connector that supports the power cord. Plug-in the female connector of the provided power cord

into this socket, and the male side of the cord into a power outlet. The Switch automatically adjusts its power

setting to any supply voltage in the range from 100 to 240 VAC at 50 to 60 Hz. Connect the Kensington-

compatible security lock, at the rear of the switch, to a secure immovable device. Insert the lock into the

notch and turn the key to secure the lock.

The rear panel also includes an outlet for an optional external power supply and one RJ-45 console port.

When a power failure occurs, the optional external RPS will immediately and automatically assume the

power supply for the Switch.

DGS-1210-10/ME

Figure 1.15

－

DGS-1210-10/ME Rear Panel

DGS-1210-10P/ME

Figure 1.16

－

DGS-1210-10P/ME Rear Panel

DGS-1210-12TS/ME

Figure 1.17

－

DGS-1210-12TS/ME Rear Panel

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

DGS-1210-20/ME

Figure 1.18

－

DGS-1210-20/ME Rear Panel

DGS-1210-28/ME

Figure 1.19

－

DGS-1210-28/ME Rear Panel

DGS-1210-28P/ME

Figure 1.20

－

DGS-1210-28P/ME Rear Panel

DGS-1210-28MP/ME

Figure 1.21

－

DGS-1210-28MP/ME Rear Panel

DGS-1210-28X/ME

Figure 1.22

－

DGS-1210-28X/ME Rear Panel

DGS-1210-28XS/ME

Figure 1.23

－

DGS-1210-28XS/ME Rear Panel

DGS-1210-52/ME

Figure 1.24

－

DGS-1210-52/ME Rear Panel

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual

DGS-1210-52P/ME

Figure 1.25

－

DGS-1210-52P/ME Rear Panel

DGS-1210-52MP/ME

Figure 1.26

－

DGS-1210-52MP/ME Rear Panel

DGS-1210-52MPP/ME

Figure 1.27

－

DGS-1210-52MPP/ME Rear Panel

Side Panel Description

The left- and right-hand panels of the Switch have heat vents to dissipate heat. Do not block these openings,

and leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation. Be reminded

that without proper heat dissipation and air circulation, system components might overheat, which could lead

to system failure.

Figure 1.28 - Side panels of the DGS-1210/ME SERIES

Gigabit Fiber Ports

The DGS-1210/ME Series features support four Small Form Factor Portable (SFP) ports (optional). See the

diagram below to view the four SFP port modules being plugged into the Switch.

Andere Handbücher für DGS-1210 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Schalten Handbücher

D-Link

D-Link EasySmart DGS-1100-08 Bedienungsanleitung

D-Link

D-Link DGS-1210-10P Bedienungsanleitung

D-Link

D-Link DGS-1210-52MP Bedienungsanleitung

D-Link

D-Link DXS-3250 - xStack Switch - Stackable Bedienungsanleitung

D-Link

D-Link DES-1024A Bedienungsanleitung

D-Link

D-Link KVM-222 Bedienungsanleitung

D-Link

D-Link EasySmart DGS-1100-24 Bedienungsanleitung

D-Link

D-Link DES-1100-10P Bedienungsanleitung

D-Link

D-Link DGS-1210-10 Bedienungsanleitung

D-Link

D-Link DXS-3600-16S Bedienungsanleitung

D-Link

D-Link xStack DGS-3610 Series Handbuch

D-Link

D-Link DGS-3000-28LP Bedienungsanleitung

D-Link

D-Link DKVM-16 - KVM Switch Bedienungsanleitung

D-Link

D-Link DES-3250TG Bedienungsanleitung

D-Link

D-Link DGS-1008P Bedienungsanleitung

D-Link

D-Link DKVM-440 Bedienungsanleitung

D-Link

D-Link xStack DGS-3612G series Bedienungsanleitung

D-Link

D-Link DU-H4 Bedienungsanleitung

D-Link

D-Link DSH-8 - 10/100Mbps Dual Speed SOHO Hub Bedienungsanleitung

D-Link

D-Link DGS-1210-28/ME Bedienungsanleitung

D-Link

D-Link DES-1008F Bedienungsanleitung

D-Link

D-Link DUB-M420 Bedienungsanleitung

D-Link

D-Link DKVM-222 Bedienungsanleitung

D-Link

D-Link DGS-3700 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung